Hot Pressed Wear Resistant Boron Carbide Square Plate

PRODUCT PARAMETERS

Description
REQUEST A QUOTE

Description

Overview of Hot Pressed Wear Resistant Boron Carbide Square Plate

Boron Carbide (B₄C) is an ultra-hard, lightweight ceramic renowned as one of the hardest man-made materials, second only to cubic boron nitride and diamond. This exceptional hardness, combined with its low density, makes it the premier choice for extreme armor and abrasive applications under demanding conditions.

Features of Hot Pressed Wear Resistant Boron Carbide Square Plate

  • Extreme Hardness: One of the hardest known substances (~9.5 Mohs), offering superior wear and abrasion resistance.
  • Very Low Density: Significantly lighter than metals and other armor ceramics like alumina and silicon carbide.
  • High Neutron Absorption Cross-Section: Excellent at absorbing neutrons, making it vital for nuclear reactor control rods and shielding.
  • Good Chemical Resistance: Inert to most acids and alkalis.
  • High Melting Point: Maintains structural integrity at very high temperatures.
ai-silicon-9-1772435854900
Hot Pressed Wear Resistant Boron Carbide Square Plate

Specifications of Hot Pressed Wear Resistant Boron Carbide Square Plate

Hot Pressed Put On Resistant Boron Carbide Square Plate– Product Specifications

Material Structure

Boron carbide (B FOUR C) is the main product. It contains over 95% pure boron carbide. Small amounts of sintering help like carbon or boron are added to support the warm pressing procedure. No other fillers or binders are utilized.

Production Refine

Home plates are made using warm pushing. This method uses heat and stress at the exact same time. The outcome is a dense, uniform structure with very reduced porosity. This procedure provides the plate its high solidity and solid wear resistance.

Physical Features

The common density is between 2.48 and 2.52 g/cm FOUR. Vickers hardness gets to 3000– 3300 HV. Flexural stamina is usually 350– 450 MPa. The material can take care of temperatures as much as 800 ° C in air without losing efficiency.

Dimensions and Resistances

Requirement square plates been available in sizes from 50 mm × 50 mm up to 300 mm × 300 mm. Density varieties from 3 mm to 25 mm. All dimensions adhere to limited resistances:
– Length/width: ± 0.1 mm
– Density: ± 0.05 mm
– Flatness: ≤ 0.1 mm per 100 mm

Personalized dimensions are available on request.

Surface area Finish

Both sides are ground to a smooth surface. Requirement surface roughness is Ra ≤ 0.8 µm. Edge chamfering is optional. Consumers can pick between as-pressed or fully machined edges.

Applications

These plates are used where severe wear resistance is needed. Common usages consist of abrasion linings, nozzle inserts, shield components, and industrial wear components. They work well in sandblasting, mining, and ballistic protection systems.

logo
Hot Pressed Wear Resistant Boron Carbide Square Plate

Applications of Hot Pressed Wear Resistant Boron Carbide Square Plate

Applications of Hot Pushed Wear Resistant Boron Carbide Square Plate

Extreme Firmness for Requiring Environments

Boron carbide is one of the hardest materials recognized. When developed right into a square plate using warm pushing, it acquires high thickness and consistent framework. This makes it perfect for usage where strong wear resistance is required. Industries rely upon this material to safeguard devices from damage brought on by abrasion, impact, or disintegration.

Armor and Ballistic Protection

Military and defense markets use hot pressed boron carbide square plates in body armor and automobile plating. The material stops high-velocity projectiles while staying lightweight. Its efficiency helps maintain workers safer without adding heavy weight to equipment or transportation systems.

Industrial Use Components

In mining, building, and material handling, equipment faces consistent wear. Square plates made from warm pressed boron carbide line chutes, receptacles, and pipelines. They lower downtime by lasting longer than steel or ceramic alternatives. Maintenance prices drop since replacements are required much less usually.

Nozzle and Abrasive Jet Elements

Waterjet reducing systems utilize boron carbide nozzles to guide rough streams. The square plate kind can be machined right into exact shapes for these components. It stands up under high stress and withstands erosion far better than most metals or oxides. This brings about cleaner cuts and regular efficiency gradually.

Nuclear and Radiation Shielding

Boron carbide absorbs neutrons properly. Square plates act as shielding parts in nuclear reactors and radiation containment arrangements. Their steady framework under warm and radiation makes them trusted for lasting safety applications.

Producers pick hot pressed boron carbide square plates due to the fact that they integrate firmness, lightweight, and sturdiness. Each plate provides consistent quality thanks to the hot pressing process, which gets rid of pores and reinforces the final product.


Company Profile

Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.


Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.


Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

ceramic crucible (32)
Hot Pressed Wear Resistant Boron Carbide Square Plate

5 FAQs of Hot Pressed Wear Resistant Boron Carbide Square Plate

Frequently Asked Questions About Hot Pressed Wear Resistant Boron Carbide Square Plates

What is a hot pressed boron carbide square plate?

It is a high-performance ceramic plate made from boron carbide powder. The material is shaped and hardened using heat and pressure in a process called hot pressing. This gives the plate excellent hardness, strength, and wear resistance.

Why choose boron carbide over other materials?

Boron carbide is one of the hardest materials known—second only to diamond. It resists abrasion far better than steel or alumina ceramics. This makes it ideal for parts that face constant friction or impact, such as liners, nozzles, or armor components.

How does hot pressing improve performance?

Hot pressing removes air pockets and creates a dense, uniform structure. This boosts mechanical strength and ensures consistent wear resistance across the entire plate. Compared to cold-pressed or sintered versions, hot pressed plates last longer under harsh conditions.

Can these plates be customized?

Yes. While standard sizes are available, manufacturers can produce plates in specific dimensions or tolerances. Custom shapes or surface finishes are also possible, depending on your application needs.

Where are these plates commonly used?

They are widely used in mining, sandblasting, defense, and industrial machinery. Examples include chute liners, blast nozzles, wear pads, and ballistic armor tiles. Anywhere extreme wear or impact occurs, boron carbide offers reliable protection and long service life.

REQUEST A QUOTE

REQUEST A QUOTE