Custom 1″/2″ (25/50/75mm) TR/TS Alumina/Zirconia/SiC Quick Change Discs

PRODUCT PARAMETERS

Description
REQUEST A QUOTE

Description

Overview of Custom 1″/2″ (25/50/75mm) TR/TS Alumina/Zirconia/SiC Quick Change Discs

Alumina Ceramic, or Aluminum Oxide (Al₂O₃), is the most widely used and versatile advanced ceramic material. Known for its excellent balance of mechanical, thermal, and electrical properties, it is a cost-effective solution for a vast array of demanding industrial applications. Alumina components are produced in purity levels ranging from 85% to 99.9%, with properties enhancing as purity increases.

Features of Custom 1″/2″ (25/50/75mm) TR/TS Alumina/Zirconia/SiC Quick Change Discs

  • High Hardness & Wear Resistance: Offers exceptional resistance to abrasion and mechanical wear.
  • Excellent Electrical Insulation: Maintains high electrical resistivity even at elevated temperatures.
  • Good Thermal Conductivity: (For a ceramic) effectively dissipates heat, especially in higher purity grades.
  • High Compressive Strength: Capable of withstanding significant mechanical loads.
  • Chemical Inertness: Highly resistant to corrosion from acids, alkalis, and molten metals.
  • Cost-Effectiveness: Provides superior performance at a lower cost compared to many other technical ceramics.
ceramic crucible (21)
Custom 1"/2" (25/50/75mm) TR/TS Alumina/Zirconia/SiC Quick Change Discs

Specifications of Custom 1″/2″ (25/50/75mm) TR/TS Alumina/Zirconia/SiC Quick Change Discs

Customized Quick-Change Discs for Accuracy Grinding and Finishing

Available Dimensions and Backing Options

We provide personalized quick-change discs in conventional diameters of 1 inch (25 mm), 2 inches (50 mm), and 3 inches (75 mm). Each disc features a safe TR (twist-lock) or TS (snap-on) support system for quick accessory and elimination. Pick the size and backing style that ideal fits your tool and application.

Abrasive Materials for every single Task

These discs can be found in three high-performance unpleasant materials: alumina , zirconia , and silicon carbide (SiC). Alumina works well on steel and other ferrous metals. Zirconia lasts longer under heavy stress and is excellent for aggressive supply removal. Silicon carbide reduces quickly on non-ferrous metals, plastics, glass, and stone.

Constructed for Speed and Uniformity

The quick-change design saves time throughout disc swaps, keeping your process smooth. The inflexible support plate ensures even contact with the job surface, offering regular results throughout every pass. These discs stand up under constant usage without deforming or shedding form.

Customization Made Simple

You can buy discs customized to your exact requirements. Select your liked rough kind, grit size, disc diameter, and support system. We support small sets and large-volume orders with the exact same focus to quality. All discs are made to tight tolerances so they execute dependably on automated or hand-operated tools.

Trusted in Requiring Settings

Machinists, producers, and finishers count on these discs for clean sides, smooth surface areas, and efficient material removal. Whether you’re deburring, blending, or prepping for layer, the best combination of dimension, support, and abrasive provides reliable efficiency every time.

ceramic crucible (16)
Custom 1"/2" (25/50/75mm) TR/TS Alumina/Zirconia/SiC Quick Change Discs

Applications of Custom 1″/2″ (25/50/75mm) TR/TS Alumina/Zirconia/SiC Quick Change Discs

Applications of Custom Quick-Change Discs

Versatile Performance Across Industries

Customized 1″/ 2″ (25/50/75mm) quick-change discs made from alumina, zirconia, or silicon carbide (SiC) provide reliable results in demanding environments. These discs connect quickly and hold solid, so you spend less time exchanging tools and more time getting job done.

Metalworking
In steel manufacture stores, zirconia and alumina discs manage grinding, deburring, and ending up on steel, stainless-steel, and other alloys. Their durability indicates fewer disc changes during long terms. The quick-change style maintains operations relocating without delays.

Aerospace & Automotive
Accuracy issues in aerospace and car production. SiC and alumina discs supply consistent surface area coatings on generator blades, engine components, and body panels. Their consistent wear aids maintain tight resistances and smooth structures without rework.

Woodworking & Composites
For forming wood, fiberglass, or carbon fiber, these discs use tidy cuts and great sanding. SiC works especially well on resin-rich surfaces, protecting against obstructing and warm build-up. The little 1″ and 2″ dimensions fit into tight spots where bigger devices can’t reach.

Electronic devices & Ceramics
Delicate tasks like polishing ceramic insulators or smoothing circuit board borders demand regulated abrasion. Alumina and SiC discs offer just sufficient attack without damaging breakable parts. Their secure backing guarantees even stress across the surface.

Maintenance & Repair work
Field service technicians rely upon these discs for instant fixes. Whether it’s eliminating rust from a pipeline or smoothing a weld seam, the quick-change system allows them switch over grits or materials in secs. No extra tools are required– simply press and go.

Each disc is built to match your exact needs. Choose the product, dimension, and grit that fits your job. With solid adhesion and constant performance, these custom-made discs keep your workflow steady and efficient.


Company Profile

Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.


Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.


Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

H28f718b820504a45be9a388c9a685c7aY
Custom 1"/2" (25/50/75mm) TR/TS Alumina/Zirconia/SiC Quick Change Discs

5 FAQs of Custom 1″/2″ (25/50/75mm) TR/TS Alumina/Zirconia/SiC Quick Change Discs

Frequently Asked Questions

What sizes are available for these quick change discs?

We offer three standard diameters: 1 inch (25 mm), 2 inches (50 mm), and 3 inches (75 mm). Choose the size that fits your tool and job best.

Which backing materials can I choose from?

You can pick from three high-performance backing options: alumina, zirconia, or silicon carbide (SiC). Alumina works well for general grinding. Zirconia lasts longer under heavy pressure. SiC is ideal for finishing non-ferrous metals and composites.

Are these discs compatible with common quick-change systems?

Yes. These discs use a standard TR (twist-lock) or TS (snap-on) hub design. They fit most popular quick-change back-up pads without extra adapters.

How do I switch between discs during work?

Just twist or snap off the used disc and attach a new one. No tools needed. The system saves time and keeps your workflow smooth.

Can I use these discs on metal, wood, and plastic?

It depends on the abrasive type. Alumina and zirconia handle steel, stainless steel, and other metals well. Silicon carbide is better for softer materials like aluminum, fiberglass, wood, and some plastics. Always match the disc to your material for best results.

REQUEST A QUOTE

REQUEST A QUOTE