Polycrystalline Mullite Ceramic Fiber Boards

PRODUCT PARAMETERS

Description
REQUEST A QUOTE

Description

Overview of Polycrystalline Mullite Ceramic Fiber Boards

Mullite is a high-performance, aluminosilicate advanced ceramic renowned for its exceptional stability in extreme environments. It is engineered to excel where thermal shock resistance, high-temperature strength, and chemical inertness are critical. Composed primarily of 3Al₂O₃·2SiO₂, mullite ceramic is a premier choice for demanding industrial applications, from furnace components to aerospace thermal protection systems.

Features of Polycrystalline Mullite Ceramic Fiber Boards

  • Superior Thermal Shock Resistance: Withstands rapid temperature changes without cracking, ideal for cyclic heating processes.
  • Excellent High-Temperature Stability: Maintains structural integrity and creep resistance at temperatures up to 1650°C and above.
  • Low Thermal Expansion & High Melting Point: Ensures dimensional stability and longevity in severe thermal conditions.
  • Outstanding Chemical & Corrosion Resistance: Performs reliably in corrosive atmospheres and against molten metals/salts.
  • Good Electrical Insulation Properties: Effective as an insulating material in high-temperature electrical applications.
  • High Refractoriness & Mechanical Strength: Offers excellent load-bearing capability in furnace settings and thermal processing.
ai-pressureless-0-1774683449048
Polycrystalline Mullite Ceramic Fiber Boards

Specification of Polycrystalline Mullite Ceramic Fiber Boards

Polycrystalline Mullite Porcelain Fiber Boards– Technical Requirements

Product Composition

These boards are made from high-purity polycrystalline mullite fibers. The main chemical components consist of light weight aluminum oxide (Al two O ₃) and silicon dioxide (SiO TWO), with Al two O three web content commonly over 72%. No natural binders are utilized in the final product, which ensures clean efficiency at heats.

Physical Qualities

The conventional density of the board varies from 280 to 320 kg/m FIVE. It has low thermal conductivity– concerning 0.12 W/(m · K) at 800 ° C– making it highly effective for thermal insulation. The compressive toughness is strong enough to sustain light structural lots without fracturing or crumbling under normal solution problems.

Temperature Resistance

Continuous usage temperature level: approximately 1500 ° C(2732 °F). Temporary peak temperature level: can withstand as much as 1600 ° C (2912 ° F) for limited durations. This makes the board suitable for applications including severe warmth, such as commercial heaters, kilns, and high-temperature reactors.

Measurements and Tolerances

Criterion board dimensions include 600 mm × 400 mm and 900 mm × 600 mm. Density options range from 10 mm to 50 mm. Dimensional tolerances are ± 2 mm for size and size, and ± 1 mm for thickness, making certain consistent fit during installation.

Trick Features

Reduced thermal contraction: less than 2% after 24-hour at 1500 ° C.
Excellent chemical security: resists assault from the majority of liquified steels and slags.
Great machinability: can be reduced or shaped on-site making use of criterion tools without unique equipment.
Non-combustible and secure: includes no hazardous products and satisfies international fire safety and security standards.

Typical Applications

Utilized in heat-treatment furnaces, ceramic sintering areas, aerospace thermal barriers, and high-temperature gaskets. Additionally suitable for back-up insulation layers in refractory cellular linings where long-lasting security matters.

ceramic crucible (22)
Polycrystalline Mullite Ceramic Fiber Boards

Applications of Polycrystalline Mullite Ceramic Fiber Boards

Applications of Polycrystalline Mullite Porcelain Fiber Boards

High-Temperature Furnaces

Polycrystalline mullite ceramic fiber boards work well in high-temperature furnaces. These boards maintain warm inside the heater. They likewise safeguard the metal covering from damage. Industries utilize them in heat-treating, sintering, and annealing procedures. The boards stay solid also above 1500 ° C.

Petrochemical Sector

Refineries and chemical plants need reputable insulation. Polycrystalline mullite boards withstand harsh chemicals and thermal shock. They line activators, reformers, and splitting systems. Their reduced thermal conductivity cuts power loss. This helps reduce fuel expenses and improve security.

Ceramics and Glass Manufacturing

Kilns and glass melting containers run at extreme temperature levels. Requirement insulation typically falls short under these problems. These ceramic fiber boards deal with duplicated heating & cooling without fracturing. They assist preserve uniform temperature level. That causes better product quality and less downtime.

Aerospace and Defense

Jet engines and projectile components face extreme warm during procedure. Polycrystalline mullite boards offer light-weight thermal protection. They are made use of in test rigs and exhaust systems. Their security at high warmth makes them suitable for critical applications.

Metallurgy

Factories and steel mills utilize these boards in ladles, tundishes, and saturating pits. The material withstands liquified steel dash and slag attack. It also lowers warm loss throughout steel handling. This improves effectiveness and prolongs devices life.

R & d

Laboratories need products that perform predictably under testing conditions. Polycrystalline mullite ceramic fiber boards offer regular thermal performance. Scientists use them in speculative heating systems and prototype systems. Their purity stays clear of contamination in sensitive experiments.


Company Profile

Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.


Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.


Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

ceramic crucible (14)
Polycrystalline Mullite Ceramic Fiber Boards

5 FAQs of Polycrystalline Mullite Ceramic Fiber Boards

Frequently Asked Questions About Polycrystalline Mullite Ceramic Fiber Boards

What are polycrystalline mullite ceramic fiber boards made of?

These boards are made from high-purity alumina and silica. The fibers form a strong, heat-resistant structure through a special manufacturing process. This gives the material excellent thermal stability.

What temperatures can these boards handle?

They work well at very high temperatures—up to 1600°C (2912°F). They keep their shape and strength even after long exposure to extreme heat. This makes them ideal for demanding industrial environments.

Where are these boards commonly used?

You’ll find them in furnaces, kilns, and reactors. They’re also used in aerospace and metal processing. Any place that needs reliable insulation at high temperatures may use these boards.

Are they resistant to thermal shock?

Yes. These boards handle rapid temperature changes without cracking or breaking. Their fine fiber structure absorbs stress caused by heating or cooling cycles. This helps extend service life in tough conditions.

How do they compare to other ceramic fiber products?

Polycrystalline mullite boards offer better performance than standard alumino-silicate fibers above 1300°C. They have lower shrinkage, higher strength, and longer durability at extreme temperatures. This makes them a preferred choice when reliability matters most.

REQUEST A QUOTE

REQUEST A QUOTE