Silicon nitride ceramic gas fuel hot surface igniter

PRODUCT PARAMETERS

Description
REQUEST A QUOTE

Description

Overview of Silicon nitride ceramic gas fuel hot surface igniter

Silicon Nitride (Si₃N₄) is a high-performance ceramic celebrated for its exceptional combination of fracture toughness, thermal shock resistance, and high-temperature strength. It is the material of choice for the most demanding structural applications involving severe thermal and mechanical stress, such as in advanced engines and bearings.

Features of Silicon nitride ceramic gas fuel hot surface igniter

  • High Fracture Toughness: Exceptional resistance to crack propagation and mechanical shock compared to other ceramics.
  • Outstanding Thermal Shock Resistance: Can withstand the most severe and rapid temperature fluctuations.
  • High Strength at Elevated Temperatures: Retains its mechanical properties up to 1200-1300°C in air.
  • Low Density & High Hardness: Lightweight and very wear-resistant.
  • Good Creep Resistance: Resists deformation under sustained load at high temperatures.
  • Excellent Rolling Contact Fatigue Life: Superior to steel in bearing applications.
ai-what-15-1773727255633
Silicon nitride ceramic gas fuel hot surface igniter

Specifications of Silicon nitride ceramic gas fuel hot surface igniter

Specifications of Silicon Nitride Ceramic Gas Hot Surface Area Igniter

Material and Building

The igniter is made from high-purity silicon nitride ceramic. This product provides superb thermal shock resistance and mechanical strength. It can handle rapid heating & cooling without cracking. The inner burner is embedded securely within the ceramic body. This style safeguards the component from straight contact with fuel or flame.

Electric Efficiency

Running Voltage: 120 V air conditioner or 240 V AIR CONDITIONER (designs available for both).
Power Intake: Normally in between 300 W and 500 W at startup, going down to 150– 250 W during constant operation.
Resistance at Room Temperature Level: Around 30– 60 ohms, depending upon design.
Shine Time: Reaches ignition temperature in 5 to 15 seconds.

Thermal Qualities

Surface Temperature: Heats up to 1,300 ° C( 2,372 ° F) or greater under regular operating problems. Feedback Time: Fast heat-up makes certain dependable ignition with very little hold-up.
Duty Cycle: Developed for intermittent use; not intended for continuous operation past supplier limits.

Physical Measurements

Standard sizes vary from 25 mm to 75 mm (1 to 3 inches). Diameter is normally 6 mm to 8 mm. Lead wires are shielded with high-temperature fiberglass sheathing. Cord length is typically 150 mm to 300 mm (6 to 12 inches), but personalized lengths are feasible.

Environmental and Security Ratings

Operating Setting: Suitable for usage in gas, gas, and various other usual aeriform fuels.
IP Score: IP54 or greater, providing security versus dust and spilling water.
Certifications: Adhere To UL, CSA, and CE safety and security requirements where applicable.

Service Life

Anticipated Life expectancy: Over 100,000 ignition cycles under correct operating problems. Performance might differ based upon gas type, voltage security, and installation high quality.

logo
Silicon nitride ceramic gas fuel hot surface igniter

Applications of Silicon nitride ceramic gas fuel hot surface igniter

Applications of Silicon Nitride Ceramic Gas Fuel Hot Surface Igniters

Reliable Ignition for Requiring Atmospheres

Silicon nitride ceramic hot surface area igniters are built for laborious. They work well in gas-fired systems where routine ignition parts fail quickly. These igniters handle high warmth, rapid temperature adjustments, and rough conditions without damaging down.

Industrial Home Heating Solutions
Factories use these igniters in stoves, heating systems, and dryers. The ceramic product stays strong even after many home heating cycles. It lights gas promptly and maintains the fire stable. This means less downtime and lower upkeep prices.

Commercial Food Preparation Equipment
Restaurants and food solution businesses rely on constant performance. Silicon nitride igniters start burners accurately in grills, fryers, and stoves. They stand up to thermal shock from constant on-off usage. Cooks obtain constant warm right away or flameouts.

Residential Heating Home Appliances
Home furnaces and hot water heater also benefit. These igniters last longer than metal kinds. They do not corrode quickly and function well in moist or filthy air. Homeowners take pleasure in much safer, extra effective home heating with less service telephone calls.

Power Generation Units
Small-scale generators that work on gas use these igniters as well. They provide immediate ignition throughout startup. Their sturdiness ensures reliable operation over thousands of cycles. This is crucial where power must stay on without disturbance.

The vital benefit is the product itself. Silicon nitride is tougher than many porcelains. It conducts heat well but does not split under stress and anxiety. It additionally resists chemical wear from burning results. All this adds up to a component that works longer and performs better.

Makers select silicon nitride igniters when failure is not an alternative. They supply quick, clean ignition each time. Whether in a factory, kitchen area, home, or power configuration, they keep systems running efficiently.


Company Profile

Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.


Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.


Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

ceramic crucible (30)
Silicon nitride ceramic gas fuel hot surface igniter

5 FAQs of Silicon nitride ceramic gas fuel hot surface igniter

Frequently Asked Questions About Silicon Nitride Ceramic Hot Surface Igniters

What is a silicon nitride ceramic hot surface igniter?

It is a small but strong part used to light gas in furnaces, water heaters, and other gas appliances. Made from silicon nitride ceramic, it heats up quickly and glows red-hot to ignite the gas safely.

Why choose silicon nitride over other materials?

Silicon nitride is very tough. It handles high heat without cracking. It also resists thermal shock better than older igniter materials like silicon carbide. This means it lasts longer and works more reliably in real-world conditions.

How long does this igniter usually last?

Most silicon nitride igniters work for 5 to 10 years. Their life depends on how often they are used and how well the appliance is maintained. Because they do not have moving parts and handle stress well, they rarely fail early.

Can it be used in all gas appliances?

Not always. You must check your appliance manual or contact the manufacturer. Some systems need specific igniter types based on voltage, shape, or control method. But many modern gas units are designed to use silicon nitride igniters because of their performance.

Does it need special maintenance?

No special care is needed. Just keep the area around it clean. Dust or debris can block airflow or affect ignition. During regular service, a technician may check its resistance or look for cracks, but routine cleaning is usually enough to keep it working well.

REQUEST A QUOTE

REQUEST A QUOTE