High Electrical Insulation 96%/99.6% Al2O3 Alumina Ceramic Sheet

PRODUCT PARAMETERS

Description
REQUEST A QUOTE

Description

Overview of High Electrical Insulation 96%/99.6% Al2O3 Alumina Ceramic Sheet

Alumina Ceramic, or Aluminum Oxide (Al₂O₃), is the most widely used and versatile advanced ceramic material. Known for its excellent balance of mechanical, thermal, and electrical properties, it is a cost-effective solution for a vast array of demanding industrial applications. Alumina components are produced in purity levels ranging from 85% to 99.9%, with properties enhancing as purity increases.

Features of High Electrical Insulation 96%/99.6% Al2O3 Alumina Ceramic Sheet

  • High Hardness & Wear Resistance: Offers exceptional resistance to abrasion and mechanical wear.
  • Excellent Electrical Insulation: Maintains high electrical resistivity even at elevated temperatures.
  • Good Thermal Conductivity: (For a ceramic) effectively dissipates heat, especially in higher purity grades.
  • High Compressive Strength: Capable of withstanding significant mechanical loads.
  • Chemical Inertness: Highly resistant to corrosion from acids, alkalis, and molten metals.
  • Cost-Effectiveness: Provides superior performance at a lower cost compared to many other technical ceramics.
ai-pressureless-0-1774683449048
High Electrical Insulation 96%/99.6% Al2O3 Alumina Ceramic Sheet

Specifications of High Electrical Insulation 96%/99.6% Al2O3 Alumina Ceramic Sheet

High Electrical Insulation Alumina Porcelain Sheet

Our high electric insulation alumina ceramic sheet is made from premium-grade light weight aluminum oxide (Al two O ₃). It comes in 2 pureness levels: 96% and 99.6%. Both offer superb efficiency for demanding industrial applications.

Key Specs

Material Make-up:
– 96% Al ₂ O ₃ or 99.6% Al Two O SIX.
– High-purity resources ensure regular top quality and reliability.

Electric Characteristics:
– Quantity resistivity goes beyond 10 ¹⁴ Ω · cm at area temperature level.
– Dielectric stamina ranges from 12 to 15 kV/mm, depending on density and purity.
– Low dielectric loss makes it optimal for high-frequency settings.

Mechanical Toughness:
– Flexural strength: 300– 400 MPa (96%) and approximately 450 MPa (99.6%).
– Hardness (Vickers): 1500– 1700 HV, supplying strong resistance to put on and abrasion.

Thermal Performance:
– Thermal conductivity: 20– 30 W/m · K( 96%) and 28– 35 W/m · K (99.6%).
– Coefficient of thermal expansion: ~ 7.0 × 10 ⁻⁶/ ° C( 25– 800 ° C). -Can run continually at temperatures as much as 1600 ° C in air.

Dimensions & Tolerances:
– Common densities: 0.25 mm to 25 mm.
– Custom dimensions offered upon demand.
– Dimensional resistance as limited as ± 0.05 mm with accuracy machining.

Surface Finish:
– Smooth surface area roughness (Ra ≤ 0.4 µm) after washing and brightening.
– Flatness controlled to satisfy limited design needs.

This alumina ceramic sheet is extensively made use of in electronic devices, power modules, semiconductor devices, sensing units, and high-voltage insulators. Its combination of high insulation, mechanical durability, and thermal stability makes it a trusted option where security and efficiency are crucial.

ai-how-1-1774665393788
High Electrical Insulation 96%/99.6% Al2O3 Alumina Ceramic Sheet

Applications of High Electrical Insulation 96%/99.6% Al2O3 Alumina Ceramic Sheet

High Electrical Insulation Alumina Porcelain Sheets

Costs Efficiency for Requiring Atmospheres

96% and 99.6% alumina ceramic sheets supply superior electric insulation in challenging industrial settings. These materials withstand high voltages without breaking down. They stay stable also when temperatures rise or problems get extreme.

Manufacturers select these ceramics because they integrate stamina with reliability. The 96% grade deals exceptional mechanical strength and good insulation at a practical expense. It works well in applications like insulators, spark plug bodies, and digital substrates. The 99.6% quality gives also higher pureness. This implies much better dielectric strength, lower signal loss, and remarkable performance in accuracy electronics and high-frequency systems.

Both qualities manage thermal tension without splitting. They increase really little when warmed, which maintains parts aligned and risk-free. Their smooth surface areas also help avoid arcing and leak currents.

These alumina sheets are made use of across numerous markets. In power electronics, they isolate high-voltage components in converters and inverters. In vehicle systems, they safeguard sensors and ignition components. Semiconductor equipment counts on them for wafer handling and chamber linings. Clinical devices utilize them where safety and security and sanitation issue many.

Machining is feasible with diamond devices, allowing custom shapes and tight resistances. The product bonds well with metals and other porcelains, making it easy to integrate right into complicated settings up.

As a result of their long service life and regular habits, these alumina sheets lower upkeep needs and system failings. Designers trust them when failure is not an alternative.


Company Profile

Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.


Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.


Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

ai-what-12-1774586954537
High Electrical Insulation 96%/99.6% Al2O3 Alumina Ceramic Sheet

5 FAQs of High Electrical Insulation 96%/99.6% Al2O3 Alumina Ceramic Sheet

Frequently Asked Questions About High Electrical Insulation Alumina Ceramic Sheets

What is this ceramic sheet made of?

This sheet is made from high-purity alumina (Al₂O₃). We offer two grades: 96% and 99.6% purity. The higher the purity, the better the electrical insulation and thermal performance.

Why choose 99.6% over 96% alumina?

The 99.6% version has fewer impurities. This gives it stronger mechanical strength, better thermal conductivity, and higher resistance to electrical breakdown. Use 99.6% when your application demands top performance in harsh conditions. Choose 96% for cost-effective solutions where extreme performance isn’t needed.

Where are these sheets commonly used?

These ceramic sheets work well in electronics, power systems, and industrial equipment. You’ll find them in insulators, substrates for circuits, spark plug bodies, semiconductor fixtures, and high-voltage components. Their stability at high temperatures makes them reliable in demanding environments.

How do they handle heat and electricity?

Both grades resist high temperatures—up to 1600°C or more. They do not conduct electricity, which makes them excellent insulators. Even under strong electric fields or rapid temperature changes, they stay stable and safe.

Can these sheets be customized?

Yes. We can cut, drill, or shape the sheets to your exact size and design. Whether you need simple rectangles or complex geometries with tight tolerances, we support custom fabrication. Just share your specifications, and we’ll match them precisely.

REQUEST A QUOTE

REQUEST A QUOTE