Next-Generation Ceramics: Unlocking Superior Properties for Industry
PRODUCT PARAMETERS
Description
Overview of Alumina Ceramic Hexagonal Lining Tile
Alumina Ceramic, or Aluminum Oxide (Al₂O₃), is the most widely used and versatile advanced ceramic material. Known for its excellent balance of mechanical, thermal, and electrical properties, it is a cost-effective solution for a vast array of demanding industrial applications. Alumina components are produced in purity levels ranging from 85% to 99.9%, with properties enhancing as purity increases.
Features of Alumina Ceramic Hexagonal Lining Tile
- High Hardness & Wear Resistance: Offers exceptional resistance to abrasion and mechanical wear.
- Excellent Electrical Insulation: Maintains high electrical resistivity even at elevated temperatures.
- Good Thermal Conductivity: (For a ceramic) effectively dissipates heat, especially in higher purity grades.
- High Compressive Strength: Capable of withstanding significant mechanical loads.
- Chemical Inertness: Highly resistant to corrosion from acids, alkalis, and molten metals.
- Cost-Effectiveness: Provides superior performance at a lower cost compared to many other technical ceramics.

Specifications of Alumina Ceramic Hexagonal Lining Tile
Alumina Porcelain Hexagonal Lining Floor Tile– Technical Specifications
Product Make-up
These tiles are made from high-purity alumina ceramic. The alumina material is normally 92% or higher. This offers the floor tiles strong resistance to put on, rust, and high temperatures.
Physical Measurements
Each ceramic tile has a conventional hexagonal shape. Usual sizes consist of 25 mm, 30 mm, and 50 mm throughout contrary flats. Density choices range from 6 mm to 25 mm. Customized dimensions are readily available upon demand. Resistance for measurements is maintained within ± 0.2 mm to make certain limited, uniform suitable throughout installation.
Mechanical Residences
The firmness of the ceramic tile gets to 1500– 1700 HV on the Vickers scale. Its flexural strength is in between 300 MPa and 400 MPa. Compressive stamina surpasses 2000 MPa. These values make the tile perfect for durable industrial use where influence and abrasion are constant concerns.
Thermal Efficiency
The optimum service temperature level is 1650 ° C in oxidizing atmospheres. Thermal conductivity is reduced, around 25– 30 W/m · K. The coefficient of thermal expansion is roughly 7.5 × 10 ⁻⁶/ ° C (from 20 ° C to 800 ° C). This aids the floor tile maintain structural stability under fast temperature changes.
Chemical Resistance
Alumina ceramic resists most acids, alkalis, and solvents. It performs well in severe chemical atmospheres, including those involving sulfuric acid, hydrochloric acid, and caustic soft drink. Nevertheless, it is not suggested for usage with hydrofluoric acid or solid alkalis at elevated temperature levels.
Surface area and Complete
Floor tiles feature a smooth, thick surface area finish. Surface roughness is usually listed below Ra 1.6 µm. This decreases material build-up and alleviates cleansing in processing equipment.
Setup Features
Each tile consists of pre-molded dovetail grooves or holes for safe anchoring. They can be bonded making use of high-temperature adhesives or mechanically fastened to steel substrates. This guarantees long-term stability even under resonance or thermal biking.

Applications of Alumina Ceramic Hexagonal Lining Tile
Applications of Alumina Ceramic Hexagonal Lining Tile
Put On Security in Harsh Settings
Alumina ceramic hexagonal lining ceramic tiles are developed to take care of difficult conditions. They stand up to use much better than a lot of products. Manufacturing facilities utilize them where equipment faces consistent friction or effect. These ceramic tiles protect surface areas from damages caused by relocating parts, falling objects, or unpleasant products.
Usage in Mining and Mineral Handling
Mining procedures count on these floor tiles to line chutes, hoppers, and conveyors. Rocks, ores, and other heavy materials scrape versus equipment daily. The hexagonal form allows the floor tiles fit securely together with little void. This style quits material from getting stuck or causing unequal wear. The result is longer devices life and fewer shutdowns for fixings.
Efficiency in Power and Concrete Plants
In power plant and concrete factories, ash, clinker, and raw dish move with pipelines and ducts at high speed. These fragments put on down steel quickly. Alumina ceramic floor tiles function as a shield. They stick firmly to steel surface areas using special adhesives or mechanical supports. Their smooth surface also assists product flow freely without build-up.
Chemical and Rust Resistance
Past physical wear, these tiles take on chemical attack. They do not react with acids, alkalis, or solvents located in many commercial processes. This makes them excellent for chemical plants, wastewater systems, and flue gas air ducts. Also in wet or moist setups, they remain solid and stable.
Easy Installment and Maintenance
The hexagonal pattern simplifies installation. Floor tiles interlock well and cover huge areas swiftly. Employees can change solitary ceramic tiles if required without redoing the whole lining. This conserves time and cuts upkeep expenses. Their lightweight nature additionally lowers stress on assistance structures.
Company Profile
Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.
Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.

Payment Methods
T/T, Western Union, Paypal, Credit Card etc.
Shipment Methods
By air, by sea, by express, as customers request.

5 FAQs of Alumina Ceramic Hexagonal Lining Tile
What is alumina ceramic hexagonal lining tile?
Alumina ceramic hexagonal lining tile is a wear-resistant tile made from high-purity aluminum oxide. Its six-sided shape allows tight, gap-free coverage on surfaces. People often use it to protect equipment from heavy abrasion, impact, and corrosion in tough industrial settings.
Where are these tiles commonly used?
You’ll find these tiles in mining, cement, power plants, and metal processing facilities. They line chutes, hoppers, pipes, and cyclones. Any place with constant material flow or harsh conditions benefits from their strength and durability.
Why choose hexagonal shape over other shapes?
The hexagonal design fits together without gaps. This stops materials from getting stuck or wearing through weak spots. It also makes installation faster and more secure than using square or rectangular tiles.
How long do these tiles last?
These tiles last much longer than steel or rubber linings. In high-wear areas, they can serve for many years without replacement. Their lifespan depends on operating conditions, but users consistently report low maintenance and long service life.
Are they hard to install?
No. Most installations use adhesive bonding or mechanical fastening. The interlocking hex pattern simplifies alignment. Skilled workers can cover large surfaces quickly. Always follow the manufacturer’s instructions for best results and maximum performance.
REQUEST A QUOTE
RELATED PRODUCTS
Factory Zibo 92% Alumina Ceramic Grinding Balls for Ball Mills
Chemically Stable Alumina Ceramic Refractory Tube Shaft
Custom Shape 92%/95% Alumina Ceramic Mosaic Wear Plates / Tiles
Alumina Ceramic Shaft for Boiler Pumps
Zirconia-Gravel Crafted Alumina Ceramic Basket Gemstone


