Next-Generation Ceramics: Unlocking Superior Properties for Industry
PRODUCT PARAMETERS
Description
Overview of Aluminum Nitride Ceramic Plate with High Thermal Conductivity Property
Aluminum Nitride (AlN) is a premier technical ceramic engineered for exceptional thermal management and electrical insulation. Its standout feature is its very high thermal conductivity, rivaling that of metals like beryllium oxide but without the toxicity, making it the material of choice for high-power and high-frequency electronic applications.
Features of Aluminum Nitride Ceramic Plate with High Thermal Conductivity Property
- Very High Thermal Conductivity: Excellent heat dissipation (140-180 W/mK), critical for managing thermal loads in electronics.
- Electrical Insulator: Superior dielectric properties and high electrical resistivity.
- Coefficient of Thermal Expansion (CTE) Matching Silicon: Closely matches the CTE of silicon chips, minimizing thermal stress in semiconductor packaging.
- Non-Toxic: A safe alternative to toxic beryllium oxide (BeO) ceramics.
- Good Mechanical Strength: Possesses adequate strength and hardness for structural support in electronic packages.

Specification of Aluminum Nitride Ceramic Plate with High Thermal Conductivity Property
Aluminum Nitride Porcelain Plate– High Thermal Conductivity
Superior Heat Monitoring for Demanding Applications
Our aluminum nitride (AlN) ceramic plate supplies impressive thermal performance where typical materials fall short. It carries out warm efficiently– as much as ten times far better than alumina porcelains– while keeping strong electrical insulation. This equilibrium makes it optimal for power electronics, LED illumination, and semiconductor tools.
Trick Attributes:
– Thermal conductivity: 170– 220 W/m · K.- Electric resistivity: > 1014 Ω · cm.
– Reduced thermal growth coefficient (4.5 ppm/ ° C).
– High mechanical toughness and hardness.
– Outstanding resistance to thermal shock.
Unlike metals, this ceramic does not carry out power. Unlike conventional ceramics, it moves warm rapidly. These characteristics permit designers to create portable, trusted systems that run cooler and last much longer. The product remains secure also under repeated heating and cooling cycles.
Produced under stringent quality controls, each plate satisfies limited dimensional resistances. Surface surface choices include polished or as-fired, depending on your needs. Custom shapes and sizes are available upon request.
Why Choose Aluminum Nitride?
In high-power or high-frequency applications, handling heat is vital. Aluminum nitride resolves this without endangering electric safety and security. It changes much less efficient products like beryllium oxide (which presents wellness threats) and conventional alumina (which traps warmth). The outcome is better performance, longer element life, and much safer procedure.
This ceramic plate functions well in atmospheres that require both thermal efficiency and dielectric stamina. It is widely utilized in laser diodes, RF components, IGBT substratums, and high-brightness LEDs.
We provide AlN plates prepared for combination into your thermal administration system. Every set undergoes strenuous screening for purity, density, and thermal residential properties to guarantee consistent results.

Applications of Aluminum Nitride Ceramic Plate with High Thermal Conductivity Property
Applications of Aluminum Nitride Ceramic Plate with High Thermal Conductivity
Power Electronics and Semiconductor Tools
Light weight aluminum nitride (AlN) ceramic plates deal with heat very well. This makes them ideal for power electronic devices. In tools like IGBT modules and MOSFETs, heat develops fast. AlN plates relocate this warm away promptly. They keep components awesome and functioning longer. Their electric insulation also prevents brief circuits.
LED Illumination Systems
High-power LED lights develop a lot of heat. If not taken care of, this warm lowers light outcome and reduces life. AlN ceramic plates function as warmth spreaders in LED packages. They pull warm from the chip to the real estate. This keeps the LED intense and secure in time. Designers choose AlN due to the fact that it works better than numerous various other products.
Laser Diodes and Optoelectronics
Laser diodes need steady temperature levels to execute right. Also little adjustments can change their wavelength or decrease power. AlN plates supply solid thermal control in small laser components. They also match well with semiconductor products in shapes and size. This reduces anxiety throughout heating and cooling down cycles.
Radar and RF Elements
In radar systems and superhigh frequency (RF) circuits, signal loss have to stay reduced. AlN has low dielectric loss and high thermal conductivity. It supports high-frequency efficiency while eliminating heat from amplifiers and transceivers. Engineers rely on it in 5G base terminals and protection electronic devices.
Sensors in Severe Environments
Some sensors work in warm, destructive, or high-voltage areas. AlN plates shield delicate components without blocking signals. They resist chemicals and stay solid at heats. This makes them helpful in vehicle, aerospace, and commercial tracking systems.
Key Advantage: Aluminum nitride incorporates excellent heat transfer with solid electrical insulation. This uncommon mix lets designers develop smaller sized, faster, and much more trustworthy digital systems across numerous areas.
Company Profile
Synthetic-chemical. focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.
Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.

Payment Methods
T/T, Western Union, Paypal, Credit Card etc.
Shipment Methods
By air, by sea, by express, as customers request.

5 FAQs of Aluminum Nitride Ceramic Plate with High Thermal Conductivity Property
Why choose aluminum nitride ceramic plates for thermal management?
High thermal conductivity
Aluminum nitride (AlN) ceramic plates move heat very well. They conduct heat up to 10 times better than standard alumina ceramics. This makes them great for electronics that get hot fast. They help keep devices cool and working right.
Are aluminum nitride plates electrically insulating?
Yes, they block electricity safely
Even though they spread heat quickly, AlN plates do not let electricity pass through. This mix of high thermal conductivity and strong electrical insulation is rare. It’s why engineers pick them for power modules and LED systems.
How strong are these ceramic plates?
Durable but brittle
AlN plates are hard and stiff. They handle high temperatures without warping. But like most ceramics, they can crack if hit or bent too much. Handle them with care during assembly.
Can aluminum nitride work in harsh environments?
Built for tough conditions
These plates resist corrosion and stay stable in high heat. They don’t react easily with other materials. That makes them reliable in demanding settings like aerospace or industrial sensors.
What industries use aluminum nitride ceramic plates?
Widely used where heat control matters
You’ll find AlN plates in electric vehicles, 5G base stations, laser diodes, and medical imaging tools. Any place that needs fast heat removal plus electrical safety often chooses aluminum nitride.
REQUEST A QUOTE
RELATED PRODUCTS
Heat Resistant Aluminum Nitride Sheet High Thermal Conductivity Insulation Ceramic Plate
Composite Boron Nitride Aluminum Nitride Textile Traversing Wire Guide
Laser Cut Aluminum Nitride Ceramic Substrate for PCB Plate Processing
Custom Aluminum Nitride Ceramic Substrate Resistant to Acid and Alkali
Factory Wear Resistance MOSFET IGBT Aluminum Nitride Thermal Pad Substrate with Hole


