Pressureless sintered silicon nitride ceramic nozzle

PRODUCT PARAMETERS

Description
REQUEST A QUOTE

Description

Overview of Pressureless sintered silicon nitride ceramic nozzle

Silicon Nitride (Si₃N₄) is a high-performance ceramic celebrated for its exceptional combination of fracture toughness, thermal shock resistance, and high-temperature strength. It is the material of choice for the most demanding structural applications involving severe thermal and mechanical stress, such as in advanced engines and bearings.

Features of Pressureless sintered silicon nitride ceramic nozzle

  • High Fracture Toughness: Exceptional resistance to crack propagation and mechanical shock compared to other ceramics.
  • Outstanding Thermal Shock Resistance: Can withstand the most severe and rapid temperature fluctuations.
  • High Strength at Elevated Temperatures: Retains its mechanical properties up to 1200-1300°C in air.
  • Low Density & High Hardness: Lightweight and very wear-resistant.
  • Good Creep Resistance: Resists deformation under sustained load at high temperatures.
  • Excellent Rolling Contact Fatigue Life: Superior to steel in bearing applications.
ai-5-1-1774949947956
Pressureless sintered silicon nitride ceramic nozzle

Specifications of Pressureless sintered silicon nitride ceramic nozzle

Pressureless Sintered Silicon Nitride Ceramic Nozzle– Technical Specs

Product Composition

Main product: High-purity silicon nitride (Si two N ₄).
Additives: Small amounts of sintering aids like yttria (Y ₂ O THREE) and alumina (Al two O SIX) to support densification during shooting.
Purity degree: ≥ 95% Si ₃ N four by weight.

Physical Properties

Density: 3.18– 3.25 g/cm ³.
Firmness: 15– 17 GPa (Vickers).
Flexural strength: 800– 1000 MPa at room temperature level.
Fracture toughness: 6.0– 7.5 MPa · m ONE/ TWO.
Thermal development coefficient: ~ 3.2 × 10 ⁻⁶/ ° C (from 25 ° C to
800 ° C). Maximum solution temperature level: As much as 1300 ° C in air.

Dimensional Tolerance

External diameter: ± 0.05 mm.
Internal birthed size: ± 0.03 mm.
Length: ± 0.1 mm.
Customized dimensions are available upon request, with tight tolerances kept with precision grinding.

Surface End up

Internal surface area roughness (Ra): ≤ 0.4 μm.
Outside surface area roughness (Ra): ≤ 0.8 μm.
Smooth interior surfaces minimize flow resistance and prevent fragment buildup throughout procedure.

Trick Efficiency Includes

Wear resistance: Excellent resistance to abrasion from high-velocity fragments.
Thermal shock resistance: Stable under fast heating and cooling down cycles.
Chemical stability: Withstands deterioration from liquified steels, slags, and lots of acids.
Electric insulation: Non-conductive also at raised temperatures.

Common Applications

Made use of in metal casting, sandblasting, plasma splashing, and high-temperature liquid handling systems. Suitable for settings where metal or basic ceramic nozzles fail rapidly as a result of heat, wear, or chemical assault.

ai-choosing-18-1774949903202
Pressureless sintered silicon nitride ceramic nozzle

Applications of Pressureless sintered silicon nitride ceramic nozzle

Applications of Pressureless Sintered Silicon Nitride Ceramic Nozzles

High-Performance in Harsh Settings

Pressureless sintered silicon nitride ceramic nozzles work well where various other products fall short. They deal with heats, strong deterioration, and heavy wear without breaking down. This makes them excellent for difficult commercial work.

Metal Processing
These nozzles are used in constant casting of steel and non-ferrous steels. Their thermal shock resistance maintains them steady throughout rapid home heating and cooling cycles. They likewise withstand chain reactions with liquified metal, which assists maintain clean flow and minimizes contamination.

Aerospace and Protection
In aerospace systems, these nozzles offer in gas injectors and thrusters. They stay strong at severe temperatures and do not warp or fracture easily. Their lightweight nature sustains much better gas effectiveness and system dependability.

Chemical and Petrochemical Industries
Silicon nitride nozzles spray hostile chemicals and acids securely. They do not rust like steel components. This expands service life and cuts maintenance prices in reactors, scrubbers, and spray systems.

Waste Therapy and Recycling
They are also located in plasma torches and slag handling systems. The nozzles sustain unpleasant bits and high warm over extended periods. This ensures constant performance in waste-to-energy plants and steel recuperation procedures.

Semiconductor Manufacturing
Sanitation and precision matter here. Silicon nitride nozzles provide etching gases and cleansing representatives without dropping particles. Their purity stops issues on delicate wafers during manufacturing.

These nozzles supply a rare mix of strength, stability, and chemical inertness. That is why designers select them when standard materials can not maintain. Their dependability brings about fewer closures and lower operating costs across several demanding areas.


Company Profile

Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.


Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.


Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

ai-choosing-0-1774949314251
Pressureless sintered silicon nitride ceramic nozzle

5 FAQs of Pressureless sintered silicon nitride ceramic nozzle

Frequently Asked Questions About Pressureless Sintered Silicon Nitride Ceramic Nozzles

What is a pressureless sintered silicon nitride ceramic nozzle?

This nozzle is made from high-purity silicon nitride powder. It is formed and then heated without external pressure. The result is a dense, strong ceramic part that keeps its shape even at very high temperatures.

Why choose silicon nitride over other ceramics?

Silicon nitride has better toughness and thermal shock resistance than most technical ceramics. It does not crack easily when temperature changes fast. It also resists wear and corrosion well. These traits make it ideal for harsh industrial environments.

Where are these nozzles commonly used?

They are often used in metal casting, sandblasting, and plasma spraying. You will also find them in chemical processing and high-temperature gas systems. Their durability helps reduce downtime and replacement costs.

How long do these nozzles last?

Life span depends on operating conditions. In normal use, they last much longer than metal or alumina nozzles. Their hardness and smooth surface slow down erosion. Many users report several times the service life of standard alternatives.

Are they expensive?

The upfront cost is higher than basic ceramic or metal nozzles. But their long life and low maintenance often save money over time. Fewer replacements mean less production stoppage and lower total operating costs. For demanding applications, they offer strong value.

REQUEST A QUOTE

REQUEST A QUOTE