Next-Generation Ceramics: Unlocking Superior Properties for Industry
PRODUCT PARAMETERS
Description
Overview of Alumina Ceramic Lining Plate for Chutes
Alumina Ceramic, or Aluminum Oxide (Al₂O₃), is the most widely used and versatile advanced ceramic material. Known for its excellent balance of mechanical, thermal, and electrical properties, it is a cost-effective solution for a vast array of demanding industrial applications. Alumina components are produced in purity levels ranging from 85% to 99.9%, with properties enhancing as purity increases.
Features of Alumina Ceramic Lining Plate for Chutes
- High Hardness & Wear Resistance: Offers exceptional resistance to abrasion and mechanical wear.
- Excellent Electrical Insulation: Maintains high electrical resistivity even at elevated temperatures.
- Good Thermal Conductivity: (For a ceramic) effectively dissipates heat, especially in higher purity grades.
- High Compressive Strength: Capable of withstanding significant mechanical loads.
- Chemical Inertness: Highly resistant to corrosion from acids, alkalis, and molten metals.
- Cost-Effectiveness: Provides superior performance at a lower cost compared to many other technical ceramics.

Specifications of Alumina Ceramic Lining Plate for Chutes
Alumina Porcelain Cellular Lining Plate for Chutes– Product Specifications
Product Composition
Alumina material: 92% to 95% aluminum oxide (Al ₂ O THREE).
This high-purity ceramic deals strong resistance to use and deterioration. Small amounts of ingredients help boost sintering and mechanical stamina.
Physical Qualities
Thickness: 3.60– 3.70 g/cm SIX.
Firmness: 1500– 1700 HV (Vickers).
Compressive stamina: ≥ 2000 MPa.
Flexural toughness: 300– 350 MPa.
These values make certain the lining plate stands up under heavy influence and constant product flow.
Thermal Performance
Maximum solution temperature level: 1600 ° C( 2912 °F). Thermal conductivity: 20– 25 W/( m · K).
Coefficient of thermal expansion: 7.5 × 10 ⁻⁶/ ° C( 20– 800 ° C). Home plate handles fast temperature level adjustments without cracking or warping.
Measurements and Resistances
Requirement thickness: 5 mm, 10 mm, 15 mm, 20 mm (custom-made sizes offered).
Size and size: Generally 100 mm × 100 mm or 150 mm × 150 mm.
Tolerance on thickness: ± 0.2 mm.
Tolerance on length/width: ± 0.5 mm.
Limited tolerances enable exact suitable in chute systems.
Surface area and Complete
Surface roughness: Ra ≤ 1.6 μm.
Complete kind: Smooth glazed or unglazed, based on application requirements.
A smooth surface lowers rubbing and stops material accumulation.
Setup Functions
Plates consist of pre-drilled holes or grooves for very easy mounting. They can be bound with high-strength adhesives or mechanically attached utilizing stainless steel anchors. This layout supports fast replacement and protected accessory in high-wear zones.

Applications of Alumina Ceramic Lining Plate for Chutes
Applications of Alumina Porcelain Lining Plate for Chutes
Why Make Use Of Alumina Ceramic Lining?
Alumina ceramic lining plates are commonly utilized to safeguard chutes in sturdy industrial atmospheres. These plates offer solid resistance to wear and effect. They help extend the life of devices that manages rough products like ores, coal, sand, and gravel.
Where Are They Made use of?
You will certainly locate alumina ceramic chute cellular linings in mining operations, nuclear power plant, cement factories, and bulk product dealing with systems. In mining, chutes relocate crushed rock and minerals. Without protection, steel surfaces wear out fast. Ceramic lining reduces this damages. In power stations, coal steps with chutes to central heating boilers. The ceramic layer keeps the chute intact regardless of consistent rubbing. Concrete plants likewise depend on these cellular linings due to the fact that raw meal and clinker are highly abrasive.
Key Conveniences
Resilience: Alumina ceramics are much more challenging than steel. They withstand scraping and disintegration far better.
Reduced Maintenance: Once installed, they need little maintenance. This reduces downtime and repair expenses.
Smooth Surface: The lining creates a slick course for materials. This decreases obstructions and enhances circulation.
Affordable: Although the in advance expense is higher than normal steel, the longer service life conserves money in time.
Installment and Fit
These plates can be found in conventional or customized forms to match chute layouts. They affix utilizing adhesives, mechanical bolts, or a combination of both. Appropriate installation guarantees complete insurance coverage and strong bonding. By doing this, the lining stays in area even under hefty tons and vibrations.
Industries pick alumina ceramic lining plates since they address actual issues. They quit rapid wear. They keep manufacturing moving. And they do it without needing consistent attention.
Company Profile
Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.
Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.

Payment Methods
T/T, Western Union, Paypal, Credit Card etc.
Shipment Methods
By air, by sea, by express, as customers request.

5 FAQs of Alumina Ceramic Lining Plate for Chutes
Common Questions About Alumina Ceramic Lining Plates for Chutes
What is an alumina ceramic lining plate?
An alumina ceramic lining plate is a wear-resistant tile made from high-purity aluminum oxide. It lines the inside of chutes, pipes, or hoppers to protect metal surfaces from abrasion. These plates are very hard and last much longer than steel in high-wear areas.
Why use ceramic lining instead of regular steel?
Steel wears out fast when handling abrasive materials like sand, ore, or ash. Alumina ceramic is up to 10 times harder than steel. This means it resists scratching, impact, and erosion far better. Using ceramic lining cuts downtime and replacement costs.
How are these plates installed?
Most plates come with pre-applied adhesive or are bonded using high-strength epoxy. Some designs use mechanical anchors or dovetail slots for extra security. The surface must be clean and dry before installation. Proper fit ensures long service life and full protection.
Can they handle high temperatures?
Yes. Alumina ceramic lining works well in temperatures up to 350°C (662°F). It keeps its strength and shape even when hot. This makes it suitable for applications like power plants, cement kilns, or metal processing lines.
Are there different grades or thicknesses?
Yes. Common alumina content ranges from 92% to 99%. Higher purity means better wear resistance. Thickness usually varies from 5 mm to 25 mm. Thicker plates are used where impact is severe. Choose the right grade and size based on your material flow and operating conditions.
REQUEST A QUOTE
RELATED PRODUCTS
Textile Equipment Al2O3 Insulation Bar / Alumina Ceramic Shaft
High Purity Alumina (Al2O3) Powder for Ceramic Industry
Professional Spherical Alumina Powder for Thermal Interface Materials
Industry Grade 99.99% Gamma Aluminum Oxide (Sapphire Jewel)
Heat Resistant Alumina Ceramic Round Shaft / Rod


