Next-Generation Ceramics: Unlocking Superior Properties for Industry
PRODUCT PARAMETERS
Description
Overview of 500mm Large Size Alumina Ceramic Component
Alumina Ceramic, or Aluminum Oxide (Al₂O₃), is the most widely used and versatile advanced ceramic material. Known for its excellent balance of mechanical, thermal, and electrical properties, it is a cost-effective solution for a vast array of demanding industrial applications. Alumina components are produced in purity levels ranging from 85% to 99.9%, with properties enhancing as purity increases.
Features of 500mm Large Size Alumina Ceramic Component
- High Hardness & Wear Resistance: Offers exceptional resistance to abrasion and mechanical wear.
- Excellent Electrical Insulation: Maintains high electrical resistivity even at elevated temperatures.
- Good Thermal Conductivity: (For a ceramic) effectively dissipates heat, especially in higher purity grades.
- High Compressive Strength: Capable of withstanding significant mechanical loads.
- Chemical Inertness: Highly resistant to corrosion from acids, alkalis, and molten metals.
- Cost-Effectiveness: Provides superior performance at a lower cost compared to many other technical ceramics.

Specifications of 500mm Large Size Alumina Ceramic Component
500mm Large Size Alumina Ceramic Component– Technical Specifications
Product Structure
This element is made from high-purity alumina ceramic. The alumina web content is 99.5% or higher. This makes sure outstanding mechanical strength, thermal stability, and electric insulation. No ingredients or binders are made use of that might damage efficiency.
Measurements and Tolerance
The typical external diameter is 500mm. Thickness ranges from 10mm to 50mm, based on consumer demands. Dimensional tolerance remains within ± 0.1 mm for critical surfaces. Monotony is regulated to ≤ 0.2 mm throughout the complete size. All edges are thoroughly chamfered to avoid breaking throughout handling.
Mechanical Characteristics
Solidity: 1600– 1700 HV (Vickers).
Flexural Strength: ≥ 350 MPa.
Compressive Toughness: ≥ 2500 MPa.
Fracture Durability: 3.5– 4.0 MPa ·m 1/2 These worths make the component ideal for heavy-duty commercial use where wear resistance and architectural dependability matter.
Thermal and Electrical Efficiency
Maximum Service Temperature Level: 1650 ° C in air.
Thermal Conductivity: 28– 32 W/m · K. Dielectric Stamina: > 15 kV/mm.
Quantity Resistivity: > 1014 Ω · cm at room temperature.
The part stays steady under rapid temperature level changes and high-voltage conditions.
Surface Area Finish and Quality
Surface area roughness is Ra ≤ 0.4 µm after great grinding. Each piece undergoes ultrasonic cleaning and visual assessment. We check for fractures, pores, or surface area problems making use of standardized high quality methods. Components fulfill ISO 9001 requirements for ceramic manufacturing.
Applications
This large-format alumina ceramic fits semiconductor processing devices, high-temperature heater components, plasma engrave chambers, and precision assessment platforms. Its dimension and purity assistance progressed engineering systems that demand absolutely no contamination and lengthy life span.

Applications of 500mm Large Size Alumina Ceramic Component
Applications of 500mm Large-Size Alumina Ceramic Elements
High-Temperature Industrial Furnaces
Big alumina ceramic parts determining 500mm are widely used in high-temperature industrial furnaces. These components handle severe heat without warping or damaging. They line heater insides, assistance heating elements, and work as protecting barriers. Their security at temperature levels over 1600 ° C makes them necessary for regular, safe operation.
Semiconductor Production Devices
In semiconductor production, sanitation and precision issue significantly. The 500mm alumina ceramic part deals superb electric insulation and ultra-low fragment shedding. It is made use of in wafer handling systems, chamber linings, and plasma engrave tools. Its smooth surface stops contamination, which aids preserve high yields throughout chip manufacture.
Vacuum and Plasma Systems
These huge ceramics execute accurately in vacuum and plasma atmospheres. They stand up to chemical strike from responsive gases and keep architectural stability under pressure differentials. Designers select them for viewports, feedthroughs, and shielding parts where steel would certainly wear away or hinder processes.
Medical and Analytical Instruments
The biocompatibility and non-magnetic nature of alumina make it ideal for advanced clinical tools. In imaging devices like MRI equipments, the 500mm ceramic component works as a stable, interference-free assistance framework. It also shows up in research laboratory analyzers that need inert, wear-resistant surfaces for lasting precision.
Sturdy Mechanical Seals
For pumps and turning equipment operating in harsh conditions, large alumina seals give long service life. They endure rough fluids, broadband, and thermal cycling much better than numerous steels or polymers. Their solidity reduces wear, while their limited resistances protect against leakages in essential fluid-handling systems.
Company Profile
Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.
Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.

Payment Methods
T/T, Western Union, Paypal, Credit Card etc.
Shipment Methods
By air, by sea, by express, as customers request.

5 FAQs of 500mm Large Size Alumina Ceramic Component
Frequently Asked Questions: 500mm Large Size Alumina Ceramic Component
What is this component made of?
This part is made from high-purity alumina ceramic. It contains at least 95% aluminum oxide. This material gives the component strong mechanical properties and excellent resistance to heat and wear.
Why choose a 500mm size?
The 500mm diameter meets the needs of large industrial systems. It fits applications that require wide coverage or structural stability. Many users pick this size to reduce assembly steps and improve system reliability.
Where is it commonly used?
You will find this component in semiconductor manufacturing, high-temperature furnaces, and vacuum equipment. It also works well in chemical processing and electrical insulation setups. Its stability under harsh conditions makes it ideal for demanding environments.
How is quality controlled?
Every piece goes through strict inspection. We check dimensions, surface finish, density, and purity. Non-destructive testing ensures there are no hidden cracks or defects. Only parts that meet our standards leave the factory.
Can it handle high temperatures?
Yes. This alumina ceramic stays stable up to 1600°C in air. It does not melt, warp, or lose strength at high heat. That’s why it’s trusted in applications like furnace linings and thermal barriers.
REQUEST A QUOTE
RELATED PRODUCTS
Rectangle 90% Al2O3 Alumina Bricks for Furnaces
4N High-Purity Alumina for Optical Lens Manufacturing
Factory Custom Refractory Alumina Ceramic Substrate / Plate / Sheet / Disc
Custom High Purity Pink Alumina (Al2O3) Ceramic Wafer / Substrate
Near-Spherical High Thermal Conductivity Alumina Powder (99.8%)


