High Heat Conductivity Aluminum Nitride Ceramic Rod for High Power Electrical Insulation

PRODUCT PARAMETERS

Description
REQUEST A QUOTE

Description

Overview of High Heat Conductivity Aluminum Nitride Ceramic Rod for High Power Electrical Insulation

Aluminum Nitride (AlN) is a premier technical ceramic engineered for exceptional thermal management and electrical insulation. Its standout feature is its very high thermal conductivity, rivaling that of metals like beryllium oxide but without the toxicity, making it the material of choice for high-power and high-frequency electronic applications.

Features of High Heat Conductivity Aluminum Nitride Ceramic Rod for High Power Electrical Insulation

  • Very High Thermal Conductivity: Excellent heat dissipation (140-180 W/mK), critical for managing thermal loads in electronics.
  • Electrical Insulator: Superior dielectric properties and high electrical resistivity.
  • Coefficient of Thermal Expansion (CTE) Matching Silicon: Closely matches the CTE of silicon chips, minimizing thermal stress in semiconductor packaging.
  • Non-Toxic: A safe alternative to toxic beryllium oxide (BeO) ceramics.
  • Good Mechanical Strength: Possesses adequate strength and hardness for structural support in electronic packages.
ai-aluminum-1-1774950336863
High Heat Conductivity Aluminum Nitride Ceramic Rod for High Power Electrical Insulation

Specification of High Heat Conductivity Aluminum Nitride Ceramic Rod for High Power Electrical Insulation

High Warmth Conductivity Aluminum Nitride Porcelain Rod

Engineered for Demanding Electrical Insulation Applications

This aluminum nitride (AlN) ceramic pole provides phenomenal thermal performance while maintaining solid electric insulation. It is constructed for high-power systems where warmth buildup can harm elements or minimize effectiveness. The material relocates warmth away swiftly, which keeps sensitive components cooler and running longer.

Secret Features
The pole provides thermal conductivity up to 170– 200 W/m · K– much greater than common alumina ceramics. At the exact same time, it blocks electrical existing effectively, with a dielectric toughness over 15 kV/mm. Its low thermal development matches well with semiconductors and metals, minimizing tension during temperature swings. The rod stays secure also at temperature levels above 1,000 ° C in air.

Material Pureness and Framework
Made from high-purity AlN powder, the pole has a dense, consistent microstructure. This reduces flaws that might weaken insulation or slow warmth flow. Oxygen web content is maintained below 1% to preserve thermal performance. Each set satisfies rigorous top quality standards for consistency and integrity.

Usual Uses
Developers utilize this ceramic pole in power components, laser diodes, RF tools, and electric vehicle inverters. It works well as a protecting spacer, support message, or warmth spreader in portable, high-heat atmospheres. The smooth surface area finish permits easy combination right into precision settings up.

Personalized Options
We offer poles in typical sizes from 2 mm to 20 mm and sizes approximately 150 mm. Custom-made sizes, resistances, and finish surfaces are offered upon request. All items undergo complete inspection prior to shipping to ensure they fulfill your technical demands.

ai-aluminum-13-1774949576808
High Heat Conductivity Aluminum Nitride Ceramic Rod for High Power Electrical Insulation

Applications of High Heat Conductivity Aluminum Nitride Ceramic Rod for High Power Electrical Insulation

High Warm Conductivity Light Weight Aluminum Nitride Porcelain Pole for High Power Electric Insulation

Why This Product Issues

Aluminum nitride (AlN) ceramic poles manage high power electric systems much better than many materials. They integrate solid electrical insulation with superb heat conduction. This makes them ideal where both safety and air conditioning are essential.

Secret Performance Includes

Strong electrical insulation : Even at high voltages, AlN rods protect against current leak. They stay stable under intense electrical stress and anxiety.
Rapid warm transfer : Unlike conventional ceramics, aluminum nitride relocates warm away swiftly. It carries out heat up to 10 times better than alumina.
Thermal security : These rods maintain their form and feature across large temperature level swings. They do not fracture or break down easily.
Mechanical strength : They stand up to wear, resonance, and physical stress and anxiety sought after arrangements.

Where It’s Made use of

Power electronic devices depend on AlN poles for dependable operation. You’ll find them inside IGBT components, RF transistors, and laser diodes. They serve as protecting supports that also pull warmth from hot spots. In electrical lorries, they aid take care of heat in inverters and onboard battery chargers. Industrial electric motor drives use them to secure circuits while boosting thermal efficiency. LED illumination systems likewise benefit– specifically high-brightness units that produce severe heat.

Producers select aluminum nitride when typical insulators fall short. It addresses the issue of overheating without compromising electric security. The outcome is longer device life, fewer failures, and more small designs.

Real-World Advantage

Making use of an AlN ceramic rod implies you do not need to trade insulation for cooling. It does both jobs well. Equipments run cooler, safer, and a lot more efficiently. That’s why designers turn to this product repeatedly in high-power applications.


Company Profile

Synthetic-chemical. focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.


Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.


Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

ai-aluminum-1-1774948300587
High Heat Conductivity Aluminum Nitride Ceramic Rod for High Power Electrical Insulation

5 FAQs of High Heat Conductivity Aluminum Nitride Ceramic Rod for High Power Electrical Insulation

High Heat Conductivity Aluminum Nitride Ceramic Rod – FAQs

What is this ceramic rod made of?

This rod is made from aluminum nitride (AlN). It is a special ceramic material. It conducts heat very well. At the same time, it blocks electricity completely. This makes it safe for high-power electrical parts.

Why use aluminum nitride instead of other ceramics?

Most ceramics do not move heat quickly. Aluminum nitride does. It moves heat up to 10 times faster than regular alumina. That helps keep electronic parts cool. It also stays strong at high temperatures. So, it works better in demanding situations.

Where is this rod used?

People use it in power electronics, LED lighting, and electric vehicles. It fits inside devices that create a lot of heat but must stay electrically isolated. Examples include IGBT modules, laser diodes, and RF systems. Its job is to pull heat away without letting current leak.

Can it handle high voltage?

Yes. Aluminum nitride has excellent electrical insulation. It can block high voltages safely. Even when hot, it keeps its insulating power. This makes it reliable in high-power setups where safety matters most.

Is it easy to install or machine?

The rod comes in standard sizes. It can be shaped before final firing. After sintering, it becomes very hard. So, post-machining needs diamond tools. Most customers order it ready-made to fit their design. This saves time and avoids damage during handling.

REQUEST A QUOTE

REQUEST A QUOTE