Next-Generation Ceramics: Unlocking Superior Properties for Industry
PRODUCT PARAMETERS
Description
Overview of Custom black silicon nitride ceramic rod and tube
Silicon Nitride (Si₃N₄) is a high-performance ceramic celebrated for its exceptional combination of fracture toughness, thermal shock resistance, and high-temperature strength. It is the material of choice for the most demanding structural applications involving severe thermal and mechanical stress, such as in advanced engines and bearings.
Features of Custom black silicon nitride ceramic rod and tube
- High Fracture Toughness: Exceptional resistance to crack propagation and mechanical shock compared to other ceramics.
- Outstanding Thermal Shock Resistance: Can withstand the most severe and rapid temperature fluctuations.
- High Strength at Elevated Temperatures: Retains its mechanical properties up to 1200-1300°C in air.
- Low Density & High Hardness: Lightweight and very wear-resistant.
- Good Creep Resistance: Resists deformation under sustained load at high temperatures.
- Excellent Rolling Contact Fatigue Life: Superior to steel in bearing applications.

Specifications of Custom black silicon nitride ceramic rod and tube
Customized Black Silicon Nitride Ceramic Rod and Tube Specifications
Material Residences
Our custom black silicon nitride ceramic poles and tubes are made from high-purity reaction-bonded or sintered silicon nitride (Si five N ₄). This material provides exceptional mechanical stamina, thermal shock resistance, and wear performance. The black color originates from managed additives that do not compromise the core buildings of the ceramic.
Density: 3.15– 3.25 g/cm FOUR.
Hardness (Vickers): 1400– 1600 HV.
Flexural Strength: 700– 900 MPa.
Fracture Toughness: 6.0– 7.5 MPa · m ¹/ ².
Thermal Conductivity: 20– 30 W/m · K.
Max Operating Temperature: Approximately 1400 ° C in air.
Dimensional Capabilities
We produce poles and tubes in a wide range of sizes to fulfill your exact needs. Requirement resistances are tight, however we can achieve also tighter precision upon demand.
Pole Diameters: 1 mm to 100 mm.
Pole Lengths: Up to 500 mm.
Tube Outer Diameters: 3 mm to 120 mm.
Tube Inner Diameters: Minimum wall thickness of 0.5 mm.
Resistances: ± 0.01 mm for important dimensions (based on size and geometry).
Surface Area Complete and Customization
All components are ground and brightened to make sure smooth surface areas and exact geometry. Surface roughness typically varies from Ra 0.2 µm to Ra 1.6 µm, relying on application demands. We support custom features such as ports, openings, tapers, and strings. Each piece is checked using accuracy assessment tools prior to shipping.
Applications
These components are optimal for demanding settings in semiconductor production, aerospace, vehicle sensing units, high-temperature fixtures, and accuracy machinery. Their combination of toughness, thermal stability, and electrical insulation makes them a trusted option where steels or conventional porcelains fall short.

Applications of Custom black silicon nitride ceramic rod and tube
Applications of Custom-made Black Silicon Nitride Ceramic Poles and Tubes
High-Performance Industrial Parts
Custom-made black silicon nitride ceramic rods and tubes are developed for tough jobs. They manage heats without buckling or breaking. These parts work well in metal casting, heat treatment heating systems, and glass processing devices. Their strong framework maintains them stable even under continuous thermal tension.
Wear-Resistant Components for Harsh Atmospheres
These porcelains stand up to put on better than many steels and typical ceramics. That makes them perfect for usage in pumps, valves, and seals that encounter rough products. Industries like mining, oil and gas, and chemical handling depend on them to reduce downtime and maintenance expenses.
Accuracy Activity and Automation Equipments
In automation, smooth motion and exact placing issue. Black silicon nitride poles serve as overview shafts or rollers in robotic arms and linear activity systems. They stay dimensionally secure with time and do not corrode, which aids equipments run much longer with less error.
Semiconductor and Electronics Production
Tidiness and thermal control are critical in chip production. Black silicon nitride tubes act as insulators or support structures inside wafer handling tools. They do not launch fragments and can take care of quick home heating and cooling cycles consistently.
Aerospace and Defense Makes Use Of
Airplane and protection systems require lightweight yet resilient products. These ceramic elements enter into sensing units, engine components, and advice systems. They perform reliably at extreme temperature levels and resist damages from resonance or shock.
Black silicon nitride sticks out because it combines stamina, thermal security, and electrical insulation in one product. When formed right into custom-made poles or tubes, it addresses issues that materials can not. Designers choose it when failing is not a choice.
Company Profile
Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.
Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.

Payment Methods
T/T, Western Union, Paypal, Credit Card etc.
Shipment Methods
By air, by sea, by express, as customers request.

5 FAQs of Custom black silicon nitride ceramic rod and tube
Frequently Asked Questions About Custom Black Silicon Nitride Ceramic Rods and Tubes
What is black silicon nitride ceramic?
Black silicon nitride is a high-performance ceramic made from silicon and nitrogen. It is sintered under high heat and pressure. The black color comes from additives that improve its strength and thermal properties. This material is very hard, lightweight, and resistant to wear and corrosion.
Why choose custom rods or tubes over standard sizes?
Many applications need parts with exact dimensions or special features. Standard sizes may not fit your design. Custom rods and tubes are made to your specifications. This ensures better performance, easier assembly, and less waste during installation.
What industries use black silicon nitride components?
These parts are common in aerospace, automotive, semiconductor manufacturing, and metal processing. They work well in high-temperature, high-stress, or corrosive environments. Their reliability makes them ideal for critical systems where failure is not an option.
How precise can the dimensions be?
We can hold tight tolerances, often within ±0.01 mm, depending on the size and shape. Advanced grinding and machining methods help achieve this accuracy. You will get consistent results across every batch you order.
Can you add features like holes, threads, or grooves?
Yes. We can machine complex features into your rods or tubes. This includes internal/external threading, cross-holes, slots, and chamfers. All features are made to match your drawings or samples. Just share your design, and we will produce it exactly as needed.
REQUEST A QUOTE
RELATED PRODUCTS
Voltage silicon nitride ceramic igniter for pellet boiler
Gas pressure silicon nitride ceramic rectangle block plate
Cermet external turning tool silicon nitride ceramic cutter
Ceramic crucibles corrosion resistant silicon nitride
Wear resistant customized silicon nitride ceramic bushing for machinery


