Next-Generation Ceramics: Unlocking Superior Properties for Industry
PRODUCT PARAMETERS
Description
Overview of Custom Heat & Cold Resistant Alumina Ceramic Plunger
Alumina Ceramic, or Aluminum Oxide (Al₂O₃), is the most widely used and versatile advanced ceramic material. Known for its excellent balance of mechanical, thermal, and electrical properties, it is a cost-effective solution for a vast array of demanding industrial applications. Alumina components are produced in purity levels ranging from 85% to 99.9%, with properties enhancing as purity increases.
Features of Custom Heat & Cold Resistant Alumina Ceramic Plunger
- High Hardness & Wear Resistance: Offers exceptional resistance to abrasion and mechanical wear.
- Excellent Electrical Insulation: Maintains high electrical resistivity even at elevated temperatures.
- Good Thermal Conductivity: (For a ceramic) effectively dissipates heat, especially in higher purity grades.
- High Compressive Strength: Capable of withstanding significant mechanical loads.
- Chemical Inertness: Highly resistant to corrosion from acids, alkalis, and molten metals.
- Cost-Effectiveness: Provides superior performance at a lower cost compared to many other technical ceramics.

Specifications of Custom Heat & Cold Resistant Alumina Ceramic Plunger
Personalized Warm & Cold Resistant Alumina Porcelain Plunger– Technical Specifications
Material Composition
Our plungers are made from high-purity alumina ceramic (Al ₂ O FOUR), with pureness degrees of 95%, 97%, or 99.5% based on your demands. This material offers the plunger strong resistance to both low and high temperature levels. It also offers exceptional hardness, wear resistance, and chemical stability.
Temperature level Performance
These bettors work dependably in severe problems. They manage continual use at temperature levels up to 1650 ° C(3000 ° F). On the cold side, they remain stable down to -200 ° C (-328 ° F) without splitting or losing toughness. Thermal shock resistance is built into the layout, so sudden temperature level modifications will not damage the component.
Mechanical Features
The alumina ceramic delivers a flexural stamina of 300– 400 MPa and a compressive stamina over 2000 MPa. Hardness reaches 1500– 1700 HV, making it extremely resistant to abrasion. The density varies from 3.6 to 3.9 g/cm SIX, making certain strong architectural stability without unnecessary weight.
Dimensional Precision
We make each bettor to limited tolerances. Standard dimensional precision is ± 0.05 mm, yet we can attain ± 0.01 mm for vital applications. Customized dimensions, forms, and features like grooves, strings, or flanges are available upon request.
Surface area Complete
Surface area roughness commonly gauges Ra 0.2– 0.8 μm. A smoother coating is feasible if required for securing or reduced friction. All parts undertake complete examination prior to shipment to make sure consistent top quality.
Chemical Resistance
Alumina ceramic resists most acids, antacid, and solvents. It will certainly not rust in harsh chemical environments, making it excellent for usage in pumps, valves, and liquid handling systems where steel parts would stop working.
Applications
Common usages consist of high-temperature pumps, semiconductor manufacturing equipment, cryogenic systems, and aggressive chemical handling. Each bettor is developed to meet your precise functional demands.

Applications of Custom Heat & Cold Resistant Alumina Ceramic Plunger
Applications of Personalized Warm & Cold Resistant Alumina Ceramic Bettor
Dependable Performance in Extreme Issues
Our custom alumina ceramic plungers take care of both very high and extremely reduced temperatures without shedding stamina or form. They function well where metal parts would certainly warp, rust, or break quick. This makes them suitable for requiring industrial settings.
Use in Chemical Processing
In chemical plants, these plungers move hostile liquids and gases safely. Alumina ceramic withstands acids, alkalis, and solvents that promptly damage other products. Operators trust fund them for constant securing and long life span, also throughout continuous procedure.
Role in Semiconductor Production
Sanitation and precision issue most in chip manufacturing. Our ceramic plungers meet strict pureness criteria. They do not shed bits or react with process gases. Their thermal security guarantees precise movement control inside vacuum chambers and etching tools.
Assistance for High-Temperature Furnaces
Heater systems need components that stay strong at red-hot temperatures. These plungers run smoothly in heat therapy and sintering processes up to 1700 ° C. They maintain their hardness and dimension, so equipment runs without constant stops for part substitute.
Value in Cryogenic Systems
At the other extreme, the exact same bettors execute accurately in cold conditions. They continue to be tough and dimensionally secure when dealing with fluid nitrogen or other cryogens. No splitting or brittleness takes place , unlike with numerous engineered plastics or metals.
Built for Your Exact Demands
We tailor each bettor to your tools’s dimension, stress score, and running variety. Limited resistances and smooth coatings lower rubbing and leak. You obtain a component that fits right and functions longer– cutting downtime and maintenance prices throughout your operation.
Company Profile
Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.
Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.

Payment Methods
T/T, Western Union, Paypal, Credit Card etc.
Shipment Methods
By air, by sea, by express, as customers request.

5 FAQs of Custom Heat & Cold Resistant Alumina Ceramic Plunger
Frequently Asked Questions
What is this plunger made of?
This plunger is made from high-purity alumina ceramic. Alumina offers excellent resistance to both high and low temperatures. It also stays strong under pressure and does not wear out quickly.
Can it handle extreme temperatures?
Yes. The plunger works well in very hot or very cold environments. It can handle temperatures up to 1,700°C (3,092°F) and remain stable even below freezing. This makes it ideal for harsh industrial settings.
Why choose ceramic over metal plungers?
Ceramic does not rust or corrode like metal. It also resists chemical damage better. Plus, it maintains its shape and smooth surface over time, which helps reduce friction and extend equipment life.
Is this plunger customizable?
Yes. We offer custom sizes, shapes, and tolerances based on your needs. Whether you need a specific diameter, length, or tip design, we can make it to match your system exactly.
Where is this plunger used?
It is commonly used in pumps, valves, and fluid control systems that operate under tough conditions. Industries like chemical processing, oil and gas, semiconductor manufacturing, and aerospace rely on this type of plunger for dependable performance.
REQUEST A QUOTE
RELATED PRODUCTS
Innovative Catalyst Support: Alumina Microspheres
Zirconia Ceramic Basket Gemstone with Alumina Coating
Raw Material for Refractories: Calcined Bauxite Alumina Grains (Al2O3)
High-Temperature Stable (Withstands 1800°C) Alumina Microspheres for Refractories
High Purity 99.5% Al2O3 Ceramic Insulation Bushing


