Activated Alumina (Gamma Aluminum Oxide) Desiccant / Adsorbent

PRODUCT PARAMETERS

Description
REQUEST A QUOTE

Description

Overview of Activated Alumina (Gamma Aluminum Oxide) Desiccant / Adsorbent

Alumina Ceramic, or Aluminum Oxide (Al₂O₃), is the most widely used and versatile advanced ceramic material. Known for its excellent balance of mechanical, thermal, and electrical properties, it is a cost-effective solution for a vast array of demanding industrial applications. Alumina components are produced in purity levels ranging from 85% to 99.9%, with properties enhancing as purity increases.

Features of Activated Alumina (Gamma Aluminum Oxide) Desiccant / Adsorbent

  • High Hardness & Wear Resistance: Offers exceptional resistance to abrasion and mechanical wear.
  • Excellent Electrical Insulation: Maintains high electrical resistivity even at elevated temperatures.
  • Good Thermal Conductivity: (For a ceramic) effectively dissipates heat, especially in higher purity grades.
  • High Compressive Strength: Capable of withstanding significant mechanical loads.
  • Chemical Inertness: Highly resistant to corrosion from acids, alkalis, and molten metals.
  • Cost-Effectiveness: Provides superior performance at a lower cost compared to many other technical ceramics.
Activated Alumina (Gamma Aluminum Oxide) Desiccant / Adsorbent
Activated Alumina (Gamma Aluminum Oxide) Desiccant / Adsorbent

Specifications of Activated Alumina (Gamma Aluminum Oxide) Desiccant / Adsorbent

Triggered Alumina (Gamma Light Weight Aluminum Oxide) Desiccant/ Adsorbent

Physical Kind and Look

Activated alumina appears as tough, spherical grains. The color varies from white to off-white. Beads are uniform in size and free from dust or fines. This physical framework makes sure great flowability and marginal stress drop in stuffed beds.

Key Requirements

The common mass density drops between 0.65– 0.75 g/cm FIVE. Crush strength standards 80– 100 N per grain, making it resistant to breakdown under typical operating conditions. Pore quantity is around 0.35– 0.45 cm SIX/ g, with a surface area of 280– 350 m ²/ g. These buildings sustain high adsorption capacity and efficient moisture elimination.

Dampness Adsorption Efficiency

This desiccant achieves a static water adsorption ability of 15– 20% by weight at 25 ° C and 50% family member moisture. It does well even at low moisture degrees. Regeneration is possible at temperature levels between 180– 300 ° C, restoring a lot of its initial ability without significant loss over multiple cycles.

Chemical Structure

Triggered alumina consists primarily of gamma-phase light weight aluminum oxide (γ-Al ₂ O ₃). It has over 90% Al Two O TWO by weight. Contaminations like sodium, silica, and iron are kept to really low degrees to prevent interference in delicate applications.

Typical Applications

It is extensively utilized for drying out air, gas, and cooling agents. Industries also rely on it for purifying water by removing fluoride, arsenic, and various other contaminants. Its security and safe nature make it suitable for food-grade and pharmaceutical procedures where pureness matters.

Activated Alumina (Gamma Aluminum Oxide) Desiccant / Adsorbent
Activated Alumina (Gamma Aluminum Oxide) Desiccant / Adsorbent

Applications of Activated Alumina (Gamma Aluminum Oxide) Desiccant / Adsorbent

Applications of Turned On Alumina (Gamma Light Weight Aluminum Oxide) Desiccant

Moisture Control in Industrial Air Equipments

Activated alumina is extensively made use of to dry compressed air. It gets rid of water vapor from air lines in producing plants, protecting against corrosion and devices damage. This maintains pneumatically-driven tools and control systems functioning well.

Drying Out Gases and Fluids

The desiccant works properly with gases like oxygen, nitrogen, hydrogen, and natural gas. It additionally dries out cooling agents and solvents utilized in chemical processes. Its high area and solid adsorption power make it suitable for deep drying tasks.

Water Defluoridation

Turned on alumina gets rid of excess fluoride from drinking water. This is important in locations where groundwater has high fluoride levels. The product binds fluoride ions safely and successfully, enhancing water high quality without including chemicals.

A/c and Refrigeration

In a/c and refrigeration devices, triggered alumina traps dampness that gets in the system during procedure or maintenance. Removing this dampness quits ice development and acid accumulation, which can hurt compressors and coils.

Petrochemical and Refining Processes

Refineries make use of turned on alumina to purify process streams. It helps remove trace water from hydrocarbons and other liquids. Tidy, dry streams enhance catalyst life and decrease rust in pipelines and reactors.

Drug and Food Handling

Tidy, completely dry air is needed in sterile atmospheres. Turned on alumina makes sure air used in product packaging, drying out, or communicating fulfills strict moisture standards. It supports item safety and security and service life without introducing pollutants.

Transformer Oil Drying

Electric transformers rely on completely dry insulating oil to operate securely. Turned on alumina draws moisture from the oil, preserving its dielectric stamina and avoiding electric failings. This expands equipment life and lowers upkeep expenses.


Company Profile

Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.


Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.


Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

5 FAQs of Activated Alumina (Gamma Aluminum Oxide) Desiccant / Adsorbent

Frequently Asked Questions About Activated Alumina Desiccant

What is activated alumina?

Activated alumina is a form of aluminum oxide. It has many tiny pores that trap moisture and other substances from air or liquids. This material is very dry and clean. People use it to remove water vapor in industrial systems.

How does it work?

It works by adsorption. Water molecules stick to the surface inside its pores. The more surface area it has, the more moisture it can hold. It does not change shape or break down during this process. You can reuse it after heating to drive out the trapped water.

Where is it used?

This desiccant is common in air dryers, refrigeration units, and compressed air systems. Factories use it to keep gases and liquids dry. It also helps purify drinking water by removing fluoride and arsenic. Labs and medical devices rely on it for moisture control too.

Is it safe?

Yes, it is safe when handled properly. It is not toxic and does not burn. Still, you should avoid breathing in the dust. Wear gloves and eye protection when handling large amounts. Keep it away from food unless it is labeled for food-grade use.

How long does it last?

Its life depends on how much moisture it absorbs and how often it is regenerated. In normal conditions, it can work for months or even years. If you heat it to about 180°C (356°F), it releases the water and can be used again. Watch for signs like reduced drying power—that means it’s time to replace or reactivate it.

REQUEST A QUOTE

REQUEST A QUOTE