Next-Generation Ceramics: Unlocking Superior Properties for Industry
PRODUCT PARAMETERS
Description
Overview of Low Sodium Microcrystalline Alumina Powder for Ceramic Components
Alumina Ceramic, or Aluminum Oxide (Al₂O₃), is the most widely used and versatile advanced ceramic material. Known for its excellent balance of mechanical, thermal, and electrical properties, it is a cost-effective solution for a vast array of demanding industrial applications. Alumina components are produced in purity levels ranging from 85% to 99.9%, with properties enhancing as purity increases.
Features of Low Sodium Microcrystalline Alumina Powder for Ceramic Components
- High Hardness & Wear Resistance: Offers exceptional resistance to abrasion and mechanical wear.
- Excellent Electrical Insulation: Maintains high electrical resistivity even at elevated temperatures.
- Good Thermal Conductivity: (For a ceramic) effectively dissipates heat, especially in higher purity grades.
- High Compressive Strength: Capable of withstanding significant mechanical loads.
- Chemical Inertness: Highly resistant to corrosion from acids, alkalis, and molten metals.
- Cost-Effectiveness: Provides superior performance at a lower cost compared to many other technical ceramics.

Specifications of Low Sodium Microcrystalline Alumina Powder for Ceramic Components
Reduced Salt Microcrystalline Alumina Powder for Ceramic Components
Key Specifications
This low salt microcrystalline alumina powder is produced high-performance ceramic components. It has a very fine fragment dimension and regular chemistry. The product delivers solid mechanical residential or commercial properties and thermal security sought after applications.
Chemical Structure:
Al ₂ O six content goes to least 99.99%.
Sodium (Na ₂ O) is maintained listed below 10 ppm.
Other contaminations like silica, iron, and calcium are tightly managed to remain under 5 ppm each.
Physical Residences:
Typical fragment size (D50) ranges from 0.3 to 0.6 microns.
Area is in between 8 and 12 m ²/ g.
Tap thickness drops within 0.8– 1.1 g/cm ³.
The powder streams well and packs uniformly during creating.
Crystal Structure:
The powder is completely alpha-phase alumina. No gamma or various other transitional stages remain after calcination. This makes certain dimensional stability throughout sintering.
Purity & Uniformity:
Every batch goes through stringent quality checks. We use ICP-MS and XRF techniques to confirm structure. Particle size is confirmed by laser diffraction. Results are logged for complete traceability.
Applications:
This powder works well in technical ceramics such as substratums, insulators, put on parts, and biomedical parts. Its reduced sodium level protects against grain boundary weakening. That causes much better stamina and reliability in the final product.
Producers choose this grade when they need clean, reactive alumina that sinters consistently without bloating or contorting. It mixes easily with binders and disperses well in liquid or non-aqueous systems. The result is green bodies with high density and few problems.
Storage space in a completely dry, covered container is advised. Keep away from dampness to maintain flow and reactivity.

Applications of Low Sodium Microcrystalline Alumina Powder for Ceramic Components
Applications of Low Salt Microcrystalline Alumina Powder in Porcelain Parts
High-Purity Efficiency for Requiring Settings
Low sodium microcrystalline alumina powder is commonly made use of to make advanced ceramic parts. Its extremely low salt content aids avoid unwanted chain reaction during high-temperature processing. This makes the final product extra secure and trusted.
Electronics and Semiconductors
In the electronic devices market, this powder produces insulating substratums and elements that have to manage heat consistently. The material’s pureness stops electrical leak and supports regular performance in semiconductor manufacturing tools.
Wear-Resistant Parts
Industrial devices often needs parts that stand up to wear and corrosion. Ceramics made from reduced salt alumina deal outstanding firmness and longevity. They are made use of in seals, bearings, and cellular linings where long service life issues.
Medical Instruments
For clinical applications, biocompatibility and tidiness are essential. The powder’s controlled chemistry enables manufacturing of implants and medical devices that meet strict health standards. It also makes certain smooth surface areas that minimize rubbing in moving parts.
Optical and Lights Equipments
Clear or translucent porcelains need consistent grain structure and marginal impurities. Low sodium microcrystalline alumina allows clear, strong parts for lamps, sensors, and safety home windows. These components remain steady also under intense light or warmth.
Producers pick this product due to the fact that it sinter well at lower temperatures. That conserves power and reduces production costs. At the same time, it supplies fine-grained microstructures that boost mechanical stamina. The result is a ceramic element that does well in tough conditions– without giving up high quality or consistency.
Company Profile
Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.
Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.

Payment Methods
T/T, Western Union, Paypal, Credit Card etc.
Shipment Methods
By air, by sea, by express, as customers request.

5 FAQs of Low Sodium Microcrystalline Alumina Powder for Ceramic Components
Frequently Asked Questions About Low Sodium Microcrystalline Alumina Powder
What is low sodium microcrystalline alumina powder?
This powder is a high-purity form of aluminum oxide. It has very fine crystals and contains minimal sodium. It is made for use in advanced ceramic parts that need strong performance and stability.
Why does sodium content matter in alumina powder?
Sodium can weaken ceramic materials at high temperatures. Even small amounts may cause defects or reduce strength. Using low sodium alumina helps create cleaner, more reliable ceramic components.
What are the main uses of this powder?
It is used to make technical ceramics for electronics, aerospace, medical devices, and industrial wear parts. These applications demand high purity, consistent grain size, and excellent thermal properties.
How does microcrystalline structure help?
The tiny crystal size allows the powder to pack tightly during forming. This leads to better sintering, higher density, and smoother surfaces in the final product. It also improves mechanical strength and resistance to cracking.
Is this powder compatible with standard ceramic processes?
Yes. It works well with common methods like dry pressing, slip casting, and injection molding. Its consistent particle size and shape make it easy to handle and process without special equipment.
REQUEST A QUOTE
RELATED PRODUCTS
Near-Spherical Alumina Powder (CAS 1344-28-1)
Low Maintenance Alumina Ceramic Shaft for Pumps
Ultra-Smooth, Low Friction Precision Ground Alumina Ceramic Substrate
Technical Ceramic Lined Tubing: 95%/96%/99% Alumina Tube/Sleeve/Bush
High-Temperature Wear Resistant Al2O3 Alumina Ceramics

