Large Pore Pseudo-Boehmite Activated Alumina

PRODUCT PARAMETERS

Description
REQUEST A QUOTE

Description

Overview of Large Pore Pseudo-Boehmite Activated Alumina

Alumina Ceramic, or Aluminum Oxide (Al₂O₃), is the most widely used and versatile advanced ceramic material. Known for its excellent balance of mechanical, thermal, and electrical properties, it is a cost-effective solution for a vast array of demanding industrial applications. Alumina components are produced in purity levels ranging from 85% to 99.9%, with properties enhancing as purity increases.

Features of Large Pore Pseudo-Boehmite Activated Alumina

  • High Hardness & Wear Resistance: Offers exceptional resistance to abrasion and mechanical wear.
  • Excellent Electrical Insulation: Maintains high electrical resistivity even at elevated temperatures.
  • Good Thermal Conductivity: (For a ceramic) effectively dissipates heat, especially in higher purity grades.
  • High Compressive Strength: Capable of withstanding significant mechanical loads.
  • Chemical Inertness: Highly resistant to corrosion from acids, alkalis, and molten metals.
  • Cost-Effectiveness: Provides superior performance at a lower cost compared to many other technical ceramics.
Large Pore Pseudo-Boehmite Activated Alumina
Large Pore Pseudo-Boehmite Activated Alumina

Specifications of Large Pore Pseudo-Boehmite Activated Alumina

Specifications of Huge Pore Pseudo-Boehmite Activated Alumina

Physical Qualities

Look: White granular strong
Bulk Density: 0.65– 0.85 g/cm FIVE
. Pore Volume: ≥ 0.50 centimeters THREE/ g.
Average Pore Diameter: 15– 30 nm.
Surface Area: 200– 350 m ²/ g.

Chemical Make-up

Al Two O Two Material: ≥ 75%.
Na ₂ O Web Content: ≤ 0.3%.
Loss on Ignition (LOI): 10– 18%.
pH Worth (in 5% slurry): 5.0– 7.5.

Efficiency Features

This triggered alumina is made from pseudo-boehmite with a big pore framework. It uses high surface and strong adsorption ability. The material reveals exceptional thermal stability and mechanical strength. It stands up to crushing under pressure and maintains form throughout usage.

The big pores enable rapid diffusion of particles. This makes it excellent for drying out gases and liquids. It likewise functions well in catalyst assistance applications where access to interior surface areas matters. Reduced salt content helps avoid unwanted side responses in sensitive procedures.

Typical Applications

Drying Representative: Utilized to eliminate water from air, natural gas, refrigerants, and commercial gases.
Catalyst Support: Works as a base for catalysts in petrochemical refining and chemical synthesis.
Fluoride Elimination: Reliable in treating drinking water by adsorbing excess fluoride ions.
Chromatography: Acts as a stationary stage in splitting up procedures as a result of its uniform pore size and surface homes.

Handling and Storage

Shop in a dry, well-ventilated area. Keep containers sealed to avoid moisture uptake prior to usage. Stay clear of contact with strong acids or bases. Usage standard industrial safety methods when handling.

Large Pore Pseudo-Boehmite Activated Alumina
Large Pore Pseudo-Boehmite Activated Alumina

Applications of Large Pore Pseudo-Boehmite Activated Alumina

Applications of Huge Pore Pseudo-Boehmite Turned On Alumina

Extremely Reliable Adsorbent for Industrial Processes

Big pore pseudo-boehmite triggered alumina is widely made use of as an effective adsorbent in many industrial settings. Its one-of-a-kind framework provides it a high surface and superb pore quantity. These features let it trap dampness, gases, and various other pollutants very well. Manufacturing facilities usually use it to completely dry air, natural gas, and refrigerants due to the fact that it draws water out fast and holds onto it firmly.

Catalyst Assistance in Chemical Manufacturing

This product also works well as an assistance for catalysts. Numerous chain reactions need a stable base to hold active components in position. The big pores in pseudo-boehmite activated alumina allow reactant molecules to move via easily. This assists accelerate responses without blocking the system. It prevails in oil refining, where it supports catalysts utilized in hydrodesulfurization and other crucial procedures.

Water Filtration and Fluoride Elimination

An additional vital use is in cleaning drinking water. Activated alumina made from pseudo-boehmite effectively removes fluoride, arsenic, and other damaging materials. Its big pores help water circulation smoothly while recording impurities. Metropolitan water supply and house filters both rely on this product to supply more secure water.

Specialty Applications in Advanced Industries

Past these core utilizes, the product appears in specialty locations like pharmaceutical production and electronics manufacturing. In pharma, it aids purify solvents and intermediates. In electronics, it dries out procedure gases to stop moisture damage throughout chip manufacture. Its thermal security and mechanical toughness make it trustworthy also under hard operating conditions.

As a result of its constant quality and versatile physical homes, huge pore pseudo-boehmite activated alumina remains a go-to option throughout several industries that demand clean, effective, and dependable efficiency.


Company Profile

Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.


Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.


Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

Large Pore Pseudo-Boehmite Activated Alumina
Large Pore Pseudo-Boehmite Activated Alumina

5 FAQs of Large Pore Pseudo-Boehmite Activated Alumina

Frequently Asked Questions About Large Pore Pseudo-Boehmite Activated Alumina

What is large pore pseudo-boehmite activated alumina?

It is a special form of activated alumina made from pseudo-boehmite. It has bigger pores than standard types. These larger pores help it trap bigger molecules and work better in certain industrial processes.

Why choose large pore over regular activated alumina?

Large pore versions handle bigger contaminants more easily. They let fluids flow through faster without clogging. This makes them ideal for treating heavy oils, complex chemicals, or moisture in gases with large molecules.

Where is this material commonly used?

It is often used in petrochemical refining, natural gas drying, and air purification systems. Factories also use it to clean solvents or remove fluoride from water when high flow rates are needed.

How long does it last before replacement?

Its lifespan depends on the job it does and how dirty the feed stream is. In dry conditions with light use, it can last over a year. In heavy-duty applications, you might need to replace or reactivate it every few months.

Can it be regenerated after use?

Yes. You can heat it to about 200–300°C to drive off trapped water or contaminants. This brings back most of its original performance. Many users regenerate it multiple times to cut costs and reduce waste.

REQUEST A QUOTE

REQUEST A QUOTE