Next-Generation Ceramics: Unlocking Superior Properties for Industry
PRODUCT PARAMETERS
Description
Overview of Custom silicon nitride ceramic locating pin for industry
Silicon Nitride (Si₃N₄) is a high-performance ceramic celebrated for its exceptional combination of fracture toughness, thermal shock resistance, and high-temperature strength. It is the material of choice for the most demanding structural applications involving severe thermal and mechanical stress, such as in advanced engines and bearings.
Features of Custom silicon nitride ceramic locating pin for industry
- High Fracture Toughness: Exceptional resistance to crack propagation and mechanical shock compared to other ceramics.
- Outstanding Thermal Shock Resistance: Can withstand the most severe and rapid temperature fluctuations.
- High Strength at Elevated Temperatures: Retains its mechanical properties up to 1200-1300°C in air.
- Low Density & High Hardness: Lightweight and very wear-resistant.
- Good Creep Resistance: Resists deformation under sustained load at high temperatures.
- Excellent Rolling Contact Fatigue Life: Superior to steel in bearing applications.

Specifications of Custom silicon nitride ceramic locating pin for industry
Customized Silicon Nitride Porcelain Finding Pin– Technical Specs
Material Structure
Our finding pins are made from high-purity silicon nitride (Si three N FOUR) ceramic. This material supplies excellent mechanical strength and thermal security. It withstands wear, corrosion, and thermal shock much better than many metals or common ceramics.
Dimensional Accuracy
We generate pins to limited tolerances as low as ± 0.001 mm. Personalized lengths, sizes, and tip geometries are available based upon your design needs. Each pin is precision-ground to make sure consistent fit and placement sought after applications.
Mechanical Properties
Silicon nitride provides a flexural strength of 800– 1000 MPa and a hardness of 15– 17 GPa (Vickers). These homes permit the pin to keep shape and function under hefty loads or repeated usage. The reduced thickness (around 3.2 g/cm ³) also decreases general system weight.
Thermal Efficiency
These pins run reliably from -50 ° C as much as 1200 ° C in air. They reveal minimal thermal expansion, which helps keep positioning stable throughout temperature level changes. No lubrication is needed even at heats.
Surface Finish
Requirement surface roughness is Ra ≤ 0.2 µm. A smoother coating can be given upon request. This fine coating reduces friction and prevents damage to mating elements throughout insertion or elimination.
Chemical Resistance
Silicon nitride does not react with most acids, antacid, or liquified metals. It remains undamaged in severe chemical settings where steel pins would certainly wear away or weaken in time.
Applications
Common usages include accuracy jigs, fixtures, semiconductor handling tools, automotive production line, and aerospace tooling. The non-magnetic and electrically protecting nature of the product makes it excellent for sensitive electronic or clinical tools arrangements.
Modification Options
We sustain full personalization– shape, dimension, resistance, and surface therapy. Just share your drawing or example, and we will certainly match your specific demands with constant top quality and rapid turn-around.

Applications of Custom silicon nitride ceramic locating pin for industry
Applications of Custom-made Silicon Nitride Porcelain Locating Pins in Industry
Precision Where It Matters Most
Personalized silicon nitride ceramic situating pins are constructed for tough jobs where steel parts fall short. These pins keep components lined up flawlessly during manufacturing, setting up, or assessment. They deal with high stress and anxiety without flexing or using down.
Why pick ceramic over metal?
Silicon nitride is more challenging than a lot of metals. It resists warmth, corrosion, and electric currents. This makes it ideal for atmospheres where temperature swings or chemicals would damage steel or light weight aluminum pins. The product likewise remains stable under pressure, so alignment remains real over time.
Secret Uses Across Industries
In automobile manufacturing , these pins placement engine obstructs, transmission real estates, and brake elements with exact precision. Even after countless cycles, they reveal little wear– maintaining resistances tight and decreasing scrap rates.
In aerospace manufacturing , integrity is non-negotiable. Ceramic situating pins hold turbine blades, landing equipment components, and architectural frameworks in position during machining. Their lightweight nature cuts handling pressure, while their thermal stability stops distortion at heats.
Electronics setting up benefits too. Silicon nitride does not carry out electricity, so it’s risk-free to use near sensitive circuits. Pins guide circuit boards, connectors, and semiconductor wafers without danger of shorting or contamination.
For clinical device manufacturers , cleanliness and accuracy go hand in hand. Ceramic pins withstand sanitation procedures like autoclaving and remain smooth even after duplicated cleansing. They assist line up surgical devices, implants, and analysis equipment with micron-level uniformity.
Built to Order
Every application has distinct requirements. Personalized pins can be formed, sized, and completed to match details fixtures or process. Whether you need a conical idea, a stepped shaft, or an unique surface area texture, silicon nitride can be machined to fulfill exact demands– without sacrificing efficiency.
Company Profile
Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.
Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.

Payment Methods
T/T, Western Union, Paypal, Credit Card etc.
Shipment Methods
By air, by sea, by express, as customers request.
5 FAQs of Custom silicon nitride ceramic locating pin for industry
Frequently Asked Questions About Custom Silicon Nitride Ceramic Locating Pins
What is a silicon nitride ceramic locating pin?
A silicon nitride ceramic locating pin is a precision component made from high-performance ceramic material. It holds parts in exact positions during manufacturing or assembly. This type of pin resists wear, handles high temperatures, and stays stable under heavy loads.
Why choose silicon nitride over metal pins?
Silicon nitride is harder than most metals. It does not rust or corrode. It also weighs less and creates less friction. These features help extend tool life and reduce maintenance costs in demanding industrial settings.
Can these pins be customized?
Yes. We make pins to your exact size, shape, and tolerance needs. Whether you need a special diameter, length, or tip design, we can produce it. Custom options ensure the pin fits your equipment perfectly.
Where are these pins used?
These pins work well in automotive, aerospace, semiconductor, and precision machining industries. They are ideal for jigs, fixtures, molds, and automated assembly lines where accuracy and durability matter most.
How long do silicon nitride pins last?
They last much longer than standard steel or carbide pins. Their extreme hardness and thermal stability mean they resist chipping, cracking, and deformation. In high-cycle applications, this translates to fewer replacements and less downtime.
REQUEST A QUOTE
RELATED PRODUCTS
High performance oem silicon nitride ceramics for industrial use
High hardness silicon nitride ceramic balls for milling
Tape casting silicon nitride ceramic substrates for electronics
Factory supply precision hardness silicon nitride ceramic ball
Custom high hardness strength black silicon nitride ceramic sleeve for industry

