Next-Generation Ceramics: Unlocking Superior Properties for Industry
PRODUCT PARAMETERS
Description
Overview of 2″ (50mm) TR/TS Alumina/Zirconia/SiC Quick Change Polishing Discs
Alumina Ceramic, or Aluminum Oxide (Al₂O₃), is the most widely used and versatile advanced ceramic material. Known for its excellent balance of mechanical, thermal, and electrical properties, it is a cost-effective solution for a vast array of demanding industrial applications. Alumina components are produced in purity levels ranging from 85% to 99.9%, with properties enhancing as purity increases.
Features of 2″ (50mm) TR/TS Alumina/Zirconia/SiC Quick Change Polishing Discs
- High Hardness & Wear Resistance: Offers exceptional resistance to abrasion and mechanical wear.
- Excellent Electrical Insulation: Maintains high electrical resistivity even at elevated temperatures.
- Good Thermal Conductivity: (For a ceramic) effectively dissipates heat, especially in higher purity grades.
- High Compressive Strength: Capable of withstanding significant mechanical loads.
- Chemical Inertness: Highly resistant to corrosion from acids, alkalis, and molten metals.
- Cost-Effectiveness: Provides superior performance at a lower cost compared to many other technical ceramics.

Specifications of 2″ (50mm) TR/TS Alumina/Zirconia/SiC Quick Change Polishing Discs
2″ (50mm) TR/TS Quick Modification Polishing Discs– Technical Specs
Product Options
These polishing discs come in 3 high-performance abrasive materials: alumina, zirconia, and silicon carbide (SiC). Each product suits different tasks. Alumina functions well on steel and various other metals. Zirconia lasts longer under hefty pressure and is wonderful for aggressive grinding. Silicon carbide reduces fast on softer products like light weight aluminum, rock, or composites.
Size and Fit
The disc diameter is exactly 2 inches (50mm). It utilizes a TR/TS quick-change system. This implies you can attach or get rid of the disc in seconds without tools. The backing is rigid and level, which gives steady contact during polishing or grinding.
Grit Array
Grit choices range from coarse to ultra-fine. Criterion choices consist of P80, P120, P180, P220, P320, P400, P600, P800, P1000, P1200, P1500, and P2000. Reduced numbers eliminate material quickly. Higher numbers create smooth, mirror-like coatings.
Support Kind
All discs include a hook-and-loop (Velcro-type) support suitable with TR/TS shafts. This design guarantees protected placing and easy substitute. The support remains company even at broadband.
Performance Includes
These discs run efficiently at accelerate to 12,000 RPM. They stand up to warmth build-up and loading, which maintains cutting action constant. Open-coat versions are readily available for better dust clearance on sticky products. Resin bonding holds rough grains securely for long life.
Typical Utilizes
Utilize these discs for steel ending up, weld mixing, deburring, paint elimination, and great sprucing up. They fit most die mills, rotating devices, and brushes that accept TR/TS shanks. Ideal for auto, aerospace, jewelry, and construction stores.

Applications of 2″ (50mm) TR/TS Alumina/Zirconia/SiC Quick Change Polishing Discs
Applications of 2″ (50mm) TR/TS Alumina/Zirconia/SiC Quick Modification Sprucing Up Discs
Versatile Efficiency Throughout Industries
These 2-inch quick change polishing discs work well in lots of areas. They fit basic TR/TS back-up pads, so arrangement is fast and very easy. The discs feature three rough types: alumina, zirconia, and silicon carbide (SiC). Each kind fits various work.
Alumina discs take care of general-purpose grinding and finishing on steels like steel and stainless-steel. They remove material swiftly and leave a smooth surface area. Zirconia discs last much longer under hefty stress. They are fantastic for hostile supply elimination on difficult alloys or during weld mixing. SiC discs function best on softer products such as light weight aluminum, brass, and plastics. They additionally brighten stone, glass, and ceramics without scratching.
Designed for Effectiveness and Control
The quick-change layout implies you spend much less time switching discs and more time functioning. Simply press the disc onto the pad– it locks in place without tools needed. This conserves effort throughout long tasks or when switching over between grits.
These discs run efficiently on angle mills, pass away grinders, and other rotary tools. Their small size provides you better control in tight spots or on detailed surface areas. You can form sides, smooth welds, or fine-tune finishes with precision.
Professionals in steel construction, vehicle fixing, aerospace, and precious jewelry making all make use of these discs. They deliver regular results whether you’re prepping a surface area for layer or doing last sprucing up. The mix of sturdiness, rate, and ease of usage makes them a smart option for day-to-day tasks.
Utilize the best abrasive for your product– alumina for steel, zirconia for heavy grinding, SiC for soft or non-metal surfaces– and obtain clean, trusted outcomes every time.
Company Profile
Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.
Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.

Payment Methods
T/T, Western Union, Paypal, Credit Card etc.
Shipment Methods
By air, by sea, by express, as customers request.

5 FAQs of 2″ (50mm) TR/TS Alumina/Zirconia/SiC Quick Change Polishing Discs
Frequently Asked Questions
What materials are these polishing discs made of?
These 2″ (50mm) quick change discs come in three abrasive types: alumina, zirconia, and silicon carbide (SiC). Each material offers different performance for specific tasks. Alumina works well on metals and wood. Zirconia lasts longer and handles heavy grinding. SiC is best for stone, glass, and non-ferrous materials.
How do I attach the disc to my tool?
The disc uses a TR/TS quick-change system. Just press it onto a compatible mandrel or holder. It locks in place without screws or adhesives. Make sure your tool has the right arbor size and type before use.
Can I use these discs with any rotary tool?
No. These discs only work with tools that support the TR/TS quick-change interface. Check your tool’s manual or look for matching markings on the collet or shaft. Using the wrong adapter may cause poor performance or safety issues.
What speed should I run the disc at?
Always follow the maximum RPM marked on the disc or packaging. Most 2″ quick-change discs run safely between 10,000 and 25,000 RPM. Never exceed this limit. High speeds can damage the disc or create hazards.
How long does each disc last?
Life span depends on the material you’re working on, pressure applied, and speed used. Zirconia discs typically last the longest under heavy use. Alumina wears faster but cuts smoothly. SiC wears quickly on hard surfaces but gives a fine finish. Replace the disc when it shows heavy wear, cracks, or reduced cutting ability.
REQUEST A QUOTE
RELATED PRODUCTS
4N High Purity Aluminum Oxide (Al2O3 ≥99.99%) for Electronic Ceramics
Chemically Stable Alumina Ceramic Round Shaft
99.999% High Purity Alumina Powder – Made in China
Zirconia-Gravel Coated Alumina Ceramic Basket Gemstone
High Purity Alumina Powder (Al2O3) 99.99%


