95%/96%/99% Alumina (Al2O3) Ceramic Components

PRODUCT PARAMETERS

Description
REQUEST A QUOTE

Description

Overview of 95%/96%/99% Alumina (Al2O3) Ceramic Components

Alumina Ceramic, or Aluminum Oxide (Al₂O₃), is the most widely used and versatile advanced ceramic material. Known for its excellent balance of mechanical, thermal, and electrical properties, it is a cost-effective solution for a vast array of demanding industrial applications. Alumina components are produced in purity levels ranging from 85% to 99.9%, with properties enhancing as purity increases.

Features of 95%/96%/99% Alumina (Al2O3) Ceramic Components

  • High Hardness & Wear Resistance: Offers exceptional resistance to abrasion and mechanical wear.
  • Excellent Electrical Insulation: Maintains high electrical resistivity even at elevated temperatures.
  • Good Thermal Conductivity: (For a ceramic) effectively dissipates heat, especially in higher purity grades.
  • High Compressive Strength: Capable of withstanding significant mechanical loads.
  • Chemical Inertness: Highly resistant to corrosion from acids, alkalis, and molten metals.
  • Cost-Effectiveness: Provides superior performance at a lower cost compared to many other technical ceramics.
ceramic crucible (26)
95%/96%/99% Alumina (Al2O3) Ceramic Components

Specifications of 95%/96%/99% Alumina (Al2O3) Ceramic Components

Requirements of 95%, 96%, and 99% Alumina Porcelain Components

Material Composition

These ceramic parts are made from high-purity light weight aluminum oxide (Al two O THREE). The numbers– 95%, 96%, and 99%– demonstrate how much pure alumina is in the product. The rest consists of percentages of ingredients that help with shaping and sintering throughout manufacturing.

Key Residences

Thickness: Varies from regarding 3.6 g/cm TWO (for 95% alumina) to 3.9 g/cm FIVE (for 99% alumina). Greater purity indicates greater thickness.
Solidity: All qualities are really hard, usually over 1500 HV on the Vickers range. This makes them extremely resistant to wear.
Flexural Stamina: Typically in between 300 MPa and 400 MPa. Stamina enhances slightly as purity increases.
Compressive Strength: Goes Beyond 2000 MPa, making these ceramics ideal for heavy-load applications.
Thermal Conductivity: Around 20– 30 W/m · K. Greater pureness qualities perform warmth much better.
Maximum Use Temperature: Approximately 1600 ° C in air, depending on the quality and application conditions.
Electric Insulation: Superb insulators also at high temperatures and voltages. Volume resistivity remains over 10 ¹⁴ Ω · centimeters.

Usual Applications

These elements are used where stamina, warmth resistance, and electric insulation matter. Instances consist of insulators in electronic devices, use components in equipment, liners for pumps and shutoffs, substratums for circuits, and components in high-temperature heating systems. The 99% grade is selected when optimum pureness, thermal conductivity, or deterioration resistance is needed. The 95% and 96% qualities use a good balance of performance and expense for much less requiring usages.

Readily available Kinds

We supply these alumina porcelains in numerous forms: rods, tubes, plates, rings, custom-machined parts, and more. Resistances can be held tight, commonly within ± 0.01 mm, depending upon the layout and size. Surface coatings vary from as-fired to fine-ground or sleek, based on your needs.

H1fdba8bf04e84ed59d927b074cf191cfs
95%/96%/99% Alumina (Al2O3) Ceramic Components

Applications of 95%/96%/99% Alumina (Al2O3) Ceramic Components

Applications of High-Purity Alumina Ceramic Elements

Why Purity Issues

Alumina (Al2O3) porcelains can be found in different pureness levels– 95%, 96%, and 99%. Each grade supplies one-of-a-kind advantages for certain commercial needs. Greater purity indicates better electric insulation, higher solidity, and stronger resistance to warm and rust.

Electronics and Electrical Systems

99% alumina is frequently used where leading efficiency issues most. It acts as substrates, insulators, and ignition system bodies in electronics. Its superb dielectric stamina maintains electric systems risk-free and stable, even under high voltage or temperature level.

Industrial Equipment and Use Components

95% and 96% alumina strike a balance in between expense and longevity. These grades work well in pump seals, shutoff seats, and cellular linings for pipes. They handle abrasive products without putting on down swiftly. Factories rely upon them to decrease downtime and maintenance prices.

Medical and Research Laboratory Equipment

In clinical tools and lab tools, sanitation and chemical stability are crucial. 99% alumina satisfies these demands. It withstands reactions with acids, bases, and sanitation procedures. You’ll discover it in medical tools, sensor real estates, and example holders.

Semiconductor Production

The semiconductor market uses high-purity alumina for wafer handling parts and chamber elements. Even little pollutants can mess up chip manufacturing. That’s why 99% alumina is preferred– it remains tidy, solid, and non-reactive in ultra-controlled settings.

Everyday Industrial Use

From fabric overviews to reducing devices, alumina porcelains turn up in lots of locations. Reduced grades like 95% alumina still offer solid mechanical stamina and thermal stability. They provide reputable service where extreme purity isn’t required however sturdiness is.


Company Profile

Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.


Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.


Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

B4C (29)
95%/96%/99% Alumina (Al2O3) Ceramic Components

5 FAQs of 95%/96%/99% Alumina (Al2O3) Ceramic Components

Frequently Asked Questions About 95%, 96%, and 99% Alumina Ceramic Components

What is the difference between 95%, 96%, and 99% alumina ceramics?

The number shows how much pure aluminum oxide (Al₂O₃) is in the material. 95% alumina has 95% Al₂O₃, 96% has slightly more, and 99% is almost pure. Higher purity usually means better hardness, strength, and resistance to heat or chemicals.

Which grade should I choose for my application?

It depends on what you need. Use 95% or 96% alumina for general industrial parts like insulators or wear plates—they cost less and still perform well. Choose 99% alumina when you need top performance in extreme conditions, such as high-temperature furnaces or semiconductor equipment.

Are these ceramics electrically insulating?

Yes. All three grades are excellent electrical insulators. They block electricity very well, even at high temperatures. This makes them ideal for electrical housings, spark plug insulators, and electronic substrates.

Can they handle high temperatures?

Absolutely. These ceramics stay strong and stable at very high temperatures. 99% alumina can work continuously above 1600°C. Even 95% alumina handles over 1400°C without deforming or losing strength.

How do they resist wear and corrosion?

Alumina ceramics are extremely hard—second only to diamond and some carbides. This hardness helps them resist scratching and abrasion. They also do not react with most acids, alkalis, or solvents, so they last long in harsh chemical environments. 99% alumina offers the best wear and corrosion resistance, but 95% and 96% still outperform many metals and plastics.

REQUEST A QUOTE

REQUEST A QUOTE