99.5% Fine Calcined Alumina Powder for LED PCB (Dielectric) (CAS 1344-28-1)

PRODUCT PARAMETERS

Description
REQUEST A QUOTE

Description

Overview of 99.5% Fine Calcined Alumina Powder for LED PCB (Dielectric) (CAS 1344-28-1)

Alumina Ceramic, or Aluminum Oxide (Al₂O₃), is the most widely used and versatile advanced ceramic material. Known for its excellent balance of mechanical, thermal, and electrical properties, it is a cost-effective solution for a vast array of demanding industrial applications. Alumina components are produced in purity levels ranging from 85% to 99.9%, with properties enhancing as purity increases.

Features of 99.5% Fine Calcined Alumina Powder for LED PCB (Dielectric) (CAS 1344-28-1)

  • High Hardness & Wear Resistance: Offers exceptional resistance to abrasion and mechanical wear.
  • Excellent Electrical Insulation: Maintains high electrical resistivity even at elevated temperatures.
  • Good Thermal Conductivity: (For a ceramic) effectively dissipates heat, especially in higher purity grades.
  • High Compressive Strength: Capable of withstanding significant mechanical loads.
  • Chemical Inertness: Highly resistant to corrosion from acids, alkalis, and molten metals.
  • Cost-Effectiveness: Provides superior performance at a lower cost compared to many other technical ceramics.
99.5% Fine Calcined Alumina Powder for LED PCB (Dielectric) (CAS 1344-28-1)
99.5% Fine Calcined Alumina Powder for LED PCB (Dielectric) (CAS 1344-28-1)

Specifications of 99.5% Fine Calcined Alumina Powder for LED PCB (Dielectric) (CAS 1344-28-1)

99.5% Great Calcined Alumina Powder for LED PCB (Dielectric)

Item Overview

This high-purity calcined alumina powder contains 99.5% aluminum oxide (Al ₂ O TWO). It is particularly processed for usage as a dielectric product in LED printed circuit boards (PCBs). The powder uses excellent electrical insulation, thermal stability, and mechanical toughness. These residential or commercial properties make it perfect for high-performance illumination applications where dependability matters.

Trick Specifications

– Chemical Purity : ≥ 99.5% Al ₂ O SIX.
– CAS Number : 1344-28-1.
– Average Bit Dimension : 0.5– 2.0 microns (flexible based upon consumer requirements).
– Shade : White.
– Moisture Content : ≤ 0.1%.
– Bulk Density : 0.8– 1.2 g/cm ³
. – Touch Density : 1.4– 1.7 g/cm FOUR.
– Loss on Ignition (LOI) : ≤ 0.2% at 1000 ° C.

Efficiency Includes

The great fragment dimension makes sure smooth dispersion in ceramic or polymer-based dielectric layers. This leads to consistent thickness and consistent insulation efficiency throughout the PCB. The product preserves its structure at heats, which aids avoid bending or cracking during LED production procedures like reflow soldering. Its low sodium web content lessens ionic contamination, protecting sensitive electronic parts from lasting destruction.

Applications

This alumina powder is utilized in:.
– Dielectric layers of metal-core PCBs (MCPCBs) for LEDs.
– Thermal interface materials requiring electrical isolation.
– Ceramic-filled epoxy solutions for high-brightness LED components.
– Substratums needing stable thermal conductivity without electric transmission.

Suppliers pick this grade for its balance of purity, fragment control, and compatibility with standard PCB fabrication approaches. It supports reliable heat dissipation while obstructing existing leak– crucial for LED durability and brightness uniformity.

99.5% Fine Calcined Alumina Powder for LED PCB (Dielectric) (CAS 1344-28-1)
99.5% Fine Calcined Alumina Powder for LED PCB (Dielectric) (CAS 1344-28-1)

Applications of 99.5% Fine Calcined Alumina Powder for LED PCB (Dielectric) (CAS 1344-28-1)

Applications of 99.5% Great Calcined Alumina Powder in LED PCB Dielectric Layers

High Purity for Dependable Performance

99.5% great calcined alumina powder (CAS 1344-28-1) is a vital product in LED printed circuit card (PCBs). Its high purity ensures steady electrical insulation and strong thermal conductivity. These characteristics are vital for LED efficiency and long life.

Thermal Management in LED Equipments

LEDs create warmth throughout procedure. If this warm is not taken care of well, it can harm components or reduce illumination. The alumina powder helps spread out warm evenly throughout the PCB. This keeps operating temperatures reduced and enhances reliability.

Electrical Insulation Without Compromise

The powder forms a solid dielectric layer between conductive traces on the PCB. It blocks undesirable present circulation while sustaining signal stability. Even under high voltage or humidity, it preserves consistent insulation properties.

Fine Bit Size for Smooth Coatings

With a firmly controlled fragment dimension circulation, this alumina powder develops uniform, thin dielectric movies. These movies bond well to substrates and fill microscopic spaces. The result is a smooth surface that sustains exact circuit patterning and lowers issues.

Compatibility with Manufacturing Processes

This product works well with standard PCB manufacture techniques like screen printing, lamination, and sintering. It does not respond with common metals such as copper or silver. That makes it easy to integrate into existing assembly line without major modifications.

Security Under Harsh Problems

LED PCBs usually operate in difficult settings– high temperature, dampness, or consistent on/off cycling. The calcined alumina continues to be chemically inert and mechanically strong under these problems. This safeguards the circuit and extends item life.


Company Profile

Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.


Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.


Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

99.5% Fine Calcined Alumina Powder for LED PCB (Dielectric) (CAS 1344-28-1)
99.5% Fine Calcined Alumina Powder for LED PCB (Dielectric) (CAS 1344-28-1)

5 FAQs of 99.5% Fine Calcined Alumina Powder for LED PCB (Dielectric) (CAS 1344-28-1)

Frequently Asked Questions: 99.5% Fine Calcined Alumina Powder for LED PCB (Dielectric)

What is this alumina powder used for?

This fine calcined alumina powder is mainly used as a dielectric filler in LED printed circuit boards (PCBs). It helps improve thermal conductivity while keeping electrical insulation strong. That makes it ideal for high-performance LED lighting systems.

Why choose 99.5% purity?

A purity level of 99.5% means very few impurities are present. Impurities can hurt performance, especially in electronics. High purity ensures stable electrical properties and better heat management in LED applications.

How does particle size affect performance?

The powder has a fine and consistent particle size. This allows it to mix evenly into resins or substrates. A uniform mix leads to smooth surfaces and reliable dielectric layers on PCBs. It also helps with packing density and thermal transfer.

Is this material safe to handle?

Yes, but standard safety practices should be followed. Wear gloves and eye protection when handling the powder. Avoid breathing dust by using proper ventilation or masks. Store in a dry place away from moisture to keep quality intact.

Does it meet industry standards?

This alumina powder meets common industry requirements for electronic-grade materials. It complies with CAS number 1344-28-1 and is tested for purity, particle size, and moisture content. Many manufacturers use it in certified LED PCB production lines.

REQUEST A QUOTE

REQUEST A QUOTE