Electrical Insulation 95% Alumina Ceramic Substrate Slice

PRODUCT PARAMETERS

Description
REQUEST A QUOTE

Description

Overview of Electrical Insulation 95% Alumina Ceramic Substrate Slice

Alumina Ceramic, or Aluminum Oxide (Al₂O₃), is the most widely used and versatile advanced ceramic material. Known for its excellent balance of mechanical, thermal, and electrical properties, it is a cost-effective solution for a vast array of demanding industrial applications. Alumina components are produced in purity levels ranging from 85% to 99.9%, with properties enhancing as purity increases.

Features of Electrical Insulation 95% Alumina Ceramic Substrate Slice

  • High Hardness & Wear Resistance: Offers exceptional resistance to abrasion and mechanical wear.
  • Excellent Electrical Insulation: Maintains high electrical resistivity even at elevated temperatures.
  • Good Thermal Conductivity: (For a ceramic) effectively dissipates heat, especially in higher purity grades.
  • High Compressive Strength: Capable of withstanding significant mechanical loads.
  • Chemical Inertness: Highly resistant to corrosion from acids, alkalis, and molten metals.
  • Cost-Effectiveness: Provides superior performance at a lower cost compared to many other technical ceramics.
ai-choosing-0-1774949969857
Electrical Insulation 95% Alumina Ceramic Substrate Slice

Specifications of Electrical Insulation 95% Alumina Ceramic Substrate Slice

Electrical Insulation 95% Alumina Porcelain Substrate Cut

Material Make-up

This substrate piece is made from 95% high-purity alumina ceramic. The continuing to be 5% consists of ingredients that improve mechanical stamina and thermal security. This make-up offers the material superb electrical insulation buildings while maintaining excellent thermal conductivity.

Trick Includes

The slice uses high dielectric stamina, which implies it can stand up to solid electrical areas without damaging down. It additionally has reduced electrical conductivity, making it ideal for separating electrical elements. Its surface area is smooth and uniform, making certain constant performance in accuracy applications.

Thermal Efficiency

This ceramic deals with heat well. It has a thermal conductivity of around 20– 28 W/m · K, allowing effective warm dissipation. It continues to be steady at temperature levels up to 1600 ° C in air. Thermal expansion is low, so the product does not break quickly under rapid temperature level changes.

Mechanical Qualities

The substrate is tough and wear-resistant. Its flexural strength arrays from 300 to 350 MPa, and Vickers firmness is around 1500– 1700 HV. These qualities make it resilient popular environments. The product additionally resists rust from the majority of chemicals and solvents.

Dimensions and Tolerances

Criterion thickness alternatives consist of 0.25 mm, 0.38 mm, 0.5 mm, 0.635 mm, and 1.0 mm. Customized sizes are offered upon request. Density resistance is usually ± 0.02 mm. Edge quality is clean, with very little damaging.

Common Applications

This substrate is extensively utilized in power electronic devices, LED components, sensing units, hybrid circuits, and high-voltage insulators. It gives trusted electrical isolation and thermal monitoring in small layouts. Engineers pick it when performance, safety and security, and long-lasting dependability issue.

ai-aluminum-1-1774949969154
Electrical Insulation 95% Alumina Ceramic Substrate Slice

Applications of Electrical Insulation 95% Alumina Ceramic Substrate Slice

Applications of Electric Insulation 95% Alumina Porcelain Substratum Slice

High-Performance Electrical Insulation

The 95% alumina ceramic substratum piece offers outstanding electrical insulation. It blocks electrical existing successfully, even under high voltage problems. This makes it excellent for usage in power electronics and high-voltage systems where safety and security and dependability are important.

Thermal Administration in Electronics

This ceramic material additionally takes care of warm well. It performs warm far from sensitive parts while remaining electrically non-conductive. Engineers utilize it in LED lights, power components, and semiconductor bundles to maintain gadgets cool and secure throughout operation.

Toughness in Extreme Atmospheres

The substrate stands up to wear, rust, and thermal shock. It executes reliably in extreme temperatures and hostile chemical settings. Due to this, it is typically located in automotive sensing units, aerospace parts, and commercial control systems that deal with tough operating conditions.

Accuracy in Miniaturized Devices

Suppliers value the dimensional stability of 95% alumina ceramic. It keeps its shape and size also after repeated heating and cooling cycles. This attribute sustains limited resistances needed in small electronic settings up like crossbreed circuits, RF components, and medical diagnostic devices.

Compatibility with Standard Procedures

The product functions well with usual production methods such as thick-film printing, metallization, and soldering. Designers can quickly incorporate it right into existing assembly line without significant changes. This helps reduce expenses and accelerate advancement time for new products.

These functions make the 95% alumina ceramic substrate cut a relied on option throughout numerous advanced modern technology fields. Its balance of insulation stamina, thermal performance, and mechanical toughness fulfills the needs of contemporary digital style.


Company Profile

Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.


Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.


Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

ai-aluminum-1-1774948984038
Electrical Insulation 95% Alumina Ceramic Substrate Slice

5 FAQs of Electrical Insulation 95% Alumina Ceramic Substrate Slice

Frequently Asked Questions About 95% Alumina Ceramic Substrate Slices

What is a 95% alumina ceramic substrate slice?

This product is a thin, flat piece made from ceramic material that contains 95% aluminum oxide (Al₂O₃). It offers strong electrical insulation and handles high temperatures well. People use it in electronics, power modules, and sensors where reliability matters.

Why choose 95% alumina over other materials?

95% alumina gives a good balance of performance and cost. It insulates electricity better than many plastics or metals. It also resists heat, wear, and corrosion. This makes it ideal for tough environments like automotive or industrial systems.

Can it handle high voltages?

Yes. These substrates have high dielectric strength. That means they block electric current even under high voltage. This property keeps circuits safe and prevents shorting in power electronics.

Is the surface smooth enough for circuit printing?

Yes. The surface is polished to be very flat and smooth. This allows thick-film or thin-film circuits to stick well during manufacturing. A uniform surface also helps with consistent electrical performance.

How do I cut or shape these slices?

Use diamond-coated tools or laser cutting. Standard metal-cutting tools will not work because alumina is very hard. Always wear safety gear. Handle pieces carefully—they are strong but can crack if dropped or bent.

REQUEST A QUOTE

REQUEST A QUOTE