Next-Generation Ceramics: Unlocking Superior Properties for Industry
PRODUCT PARAMETERS
Description
Overview of First Grade White Fused Alumina (Al2O3 ≥99%) for Refractory Bricks
Alumina Ceramic, or Aluminum Oxide (Al₂O₃), is the most widely used and versatile advanced ceramic material. Known for its excellent balance of mechanical, thermal, and electrical properties, it is a cost-effective solution for a vast array of demanding industrial applications. Alumina components are produced in purity levels ranging from 85% to 99.9%, with properties enhancing as purity increases.
Features of First Grade White Fused Alumina (Al2O3 ≥99%) for Refractory Bricks
- High Hardness & Wear Resistance: Offers exceptional resistance to abrasion and mechanical wear.
- Excellent Electrical Insulation: Maintains high electrical resistivity even at elevated temperatures.
- Good Thermal Conductivity: (For a ceramic) effectively dissipates heat, especially in higher purity grades.
- High Compressive Strength: Capable of withstanding significant mechanical loads.
- Chemical Inertness: Highly resistant to corrosion from acids, alkalis, and molten metals.
- Cost-Effectiveness: Provides superior performance at a lower cost compared to many other technical ceramics.

Specifications of First Grade White Fused Alumina (Al2O3 ≥99%) for Refractory Bricks
First Quality White Fused Alumina for Refractory Bricks
Key Specifications
Chemical Make-up:
This white fused alumina contains a minimum of 99% aluminum oxide (Al two O ₃). The staying 1% contains very low levels of contaminations. Iron oxide (Fe ₂ O ₃) is limited to no more than 0.03%. Silicon dioxide (SiO TWO) stays listed below 0.08%. Salt oxide (Na ₂ O) does not exceed 0.45%. These limited chemical controls make certain high purity and constant efficiency.
Physical Properties:
The product appears as white crystalline grains. It has a Mohs solidity of 9, making it extremely difficult and wear-resistant. Its mass density goes to least 3.90 g/cm FOUR. Real density gets to 4.00 g/cm four or greater. The combination point surpasses 2050 ° C, which supports use in high-temperature atmospheres.
Fragment Size:
Readily available in different mesh sizes to satisfy different manufacturing requirements. Common options include 0– 1 mm, 1– 3 mm, 3– 5 mm, and finer powders such as 100 mesh or 200 mesh. Custom sizing is additionally possible upon demand. All grades maintain uniform bit distribution and marginal dirt web content.
Application Benefits:
First grade white fused alumina is optimal for producing high-performance refractory blocks. Its high Al two O ₃ web content boosts thermal security and deterioration resistance. The reduced pollutant degrees stop unwanted reactions throughout brick shooting. This causes stronger, longer-lasting cellular linings for heaters, kilns, and other high-heat industrial devices. The material additionally boosts the mechanical stamina and abrasion resistance of completed bricks.
Product packaging and Handling:
Provided in moisture-proof woven bags with internal liners, usually 25 kg or 1000 kg per bag. Store in a completely dry, covered location to stay clear of moisture absorption. Handle with basic commercial safety and security techniques– make use of gloves and eye defense when collaborating with fine powders.

Applications of First Grade White Fused Alumina (Al2O3 ≥99%) for Refractory Bricks
Applications of First Quality White Fused Alumina (Al Two O ₃ ≥ 99%) in Refractory Bricks
High-Temperature Efficiency
Initial grade white merged alumina contains at the very least 99% aluminum oxide. This high pureness offers refractory bricks outstanding resistance to warm. These bricks can function well in environments above 1700 ° C without softening or warping. Industries like steelmaking, glass production, and cement manufacturing rely upon this stability.
Solid Use and Corrosion Resistance
White fused alumina is very difficult. It aids refractory bricks resist physical wear from relocating materials or molten metal circulation. The product additionally stands up well against chemical assault from slags, acids, and alkalis. This makes it excellent for linings in heaters, ladles, and kilns where harsh problems exist.
Dense Framework and Reduced Porosity
Bricks made with initial grade white fused alumina have a limited, consistent structure. Their reduced porosity restricts the entry of molten materials and gases. This reduces interior damages and prolongs service life. Such blocks preserve stability also under thermal cycling– repeated cooling and heating.
Consistent Top Quality for Reliable Outcomes
Makers pick this grade of alumina due to the fact that its structure is secure set after batch. There are couple of pollutants like iron or silica that might decrease performance. This consistency makes certain foreseeable behavior during brick creating, firing, and actual use. Users obtain reliable performance without unanticipated failings.
Versatile Usage Throughout Industries
These refractory blocks appear in numerous vital applications. Steel plants utilize them in electrical arc heaters and tundishes. Glass manufacturing facilities line melting containers with them. Cement kilns, petrochemical activators, and non-ferrous steel smelters also depend on their toughness. Wherever severe warm and aggressive chemicals fulfill, initial quality white integrated alumina supplies tested results.
Company Profile
Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.
Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.

Payment Methods
T/T, Western Union, Paypal, Credit Card etc.
Shipment Methods
By air, by sea, by express, as customers request.
5 FAQs of First Grade White Fused Alumina (Al2O3 ≥99%) for Refractory Bricks
Frequently Asked Questions About First Grade White Fused Alumina (Al₂O₃ ≥99%) for Refractory Bricks
What is first grade white fused alumina?
First grade white fused alumina is a high-purity abrasive material made from calcined alumina. It contains at least 99% aluminum oxide (Al₂O₃). The material is white in color and has excellent hardness, thermal stability, and chemical inertness.
Why use it in refractory bricks?
Refractory bricks must withstand very high temperatures and harsh conditions. White fused alumina improves the brick’s strength, resistance to wear, and ability to handle heat. Its high purity means fewer impurities that could weaken the brick or cause early failure.
How does it affect brick performance?
Adding white fused alumina makes refractory bricks denser and more durable. It helps the bricks keep their shape and structure even after long exposure to extreme heat. This leads to longer service life and better performance in furnaces, kilns, and other high-temperature equipment.
Is it different from brown fused alumina?
Yes. Brown fused alumina contains more impurities like titanium and iron oxides. White fused alumina is purer and whiter because it is made from higher-grade raw materials. This makes it better suited for applications where chemical stability and high refractoriness are critical.
What industries use refractory bricks with white fused alumina?
These bricks are common in steelmaking, cement production, glass manufacturing, and non-ferrous metal processing. Any industry that uses high-temperature processes benefits from the reliability and performance of bricks made with first grade white fused alumina.
REQUEST A QUOTE
RELATED PRODUCTS
High Purity Insulating Alumina Ceramic Bar / Strip / Rectangle Sheet
Factory Zibo 92% Alumina Ceramic Grinding Balls for Ball Mills
Al2O3 Ceramic Roller / Pipe for Glass Furnace & Sintering Kilns
Super Flat, High Purity Industrial Alumina Ceramic Bar
China Hexagonal 92%/95% Alumina Ceramic Mosaic Lining Tiles

