High Quality 96% Alumina (Al2O3) PCB Ceramic Substrate

PRODUCT PARAMETERS

Description
REQUEST A QUOTE

Description

Overview of High Quality 96% Alumina (Al2O3) PCB Ceramic Substrate

Alumina Ceramic, or Aluminum Oxide (Al₂O₃), is the most widely used and versatile advanced ceramic material. Known for its excellent balance of mechanical, thermal, and electrical properties, it is a cost-effective solution for a vast array of demanding industrial applications. Alumina components are produced in purity levels ranging from 85% to 99.9%, with properties enhancing as purity increases.

Features of High Quality 96% Alumina (Al2O3) PCB Ceramic Substrate

  • High Hardness & Wear Resistance: Offers exceptional resistance to abrasion and mechanical wear.
  • Excellent Electrical Insulation: Maintains high electrical resistivity even at elevated temperatures.
  • Good Thermal Conductivity: (For a ceramic) effectively dissipates heat, especially in higher purity grades.
  • High Compressive Strength: Capable of withstanding significant mechanical loads.
  • Chemical Inertness: Highly resistant to corrosion from acids, alkalis, and molten metals.
  • Cost-Effectiveness: Provides superior performance at a lower cost compared to many other technical ceramics.
ai-aluminum-19-1774949937917
High Quality 96% Alumina (Al2O3) PCB Ceramic Substrate

Specifications of High Quality 96% Alumina (Al2O3) PCB Ceramic Substrate

High-Quality 96% Alumina Porcelain Substrate for PCB Applications

Material Make-up and Pureness

This ceramic substrate is made from 96% pure alumina (Al ₂ O FOUR). The staying 4% consists of ingredients that help with sintering and mechanical toughness. This structure gives the material excellent electric insulation and thermal performance. It satisfies market standards for high-reliability electronic applications.

Secret Physical Features

The substratum has a thickness of about 3.7 g/cm SIX , which makes sure structural honesty without adding unneeded weight. Its flexural toughness gets to 300– 350 MPa , making it immune to breaking during managing or setting up. The coefficient of thermal development is 6.5– 7.5 ppm/ ° C (from 25 ° C to 400 ° C), carefully matching several semiconductor products. This reduces stress and anxiety during temperature level adjustments.

Thermal and Electric Performance

With a thermal conductivity of 24– 28 W/m · K , this alumina substratum effectively relocates heat far from delicate elements. It sustains steady procedure in high-power or high-frequency circuits. The dielectric constant is around 9.6 at 1 MHz , and the dissipation variable stays listed below 0.001 , making certain very little signal loss. Quantity resistivity surpasses 10 ¹⁴ Ω · cm , offering strong insulation even in damp settings.

Surface and Dimensional Functions

Both sides of the substrate are ground and sleek to a surface roughness of Ra ≤ 0.5 μm , permitting accurate thin-film or thick-film metallization. Criterion density choices include 0.25 mm, 0.38 mm, 0.5 mm, 0.635 mm, and 1.0 mm . Customized sizes and shapes are readily available upon request. Resistances on density and flatness comply with ± 0.03 mm and ≤ 0.1 mm per 100 mm , specifically.

Applications

This 96% alumina substrate is optimal for power components, LED packages, RF gadgets, sensors, and vehicle electronics . Its balance of expense, performance, and reliability makes it a top choice for requiring commercial and business uses.

ai-why-25-1774949420799
High Quality 96% Alumina (Al2O3) PCB Ceramic Substrate

Applications of High Quality 96% Alumina (Al2O3) PCB Ceramic Substrate

Applications of High-Quality 96% Alumina (Al ₂ O THREE) PCB Ceramic Substrate

Power Electronics and LED Lights

High-quality 96% alumina ceramic substratums are commonly utilized in power electronics. Their solid electric insulation and superb thermal conductivity make them suitable for managing high voltages and warmth. In LED lighting, these substrates help move warmth far from the chip promptly. This keeps LEDs intense longer and improves overall efficiency.

Aerospace and Protection Solutions

In aerospace and defense, reliability is important. The 96% alumina substratum offers secure performance under extreme temperature levels and extreme conditions. It stands up to moisture, chemicals, and mechanical stress and anxiety. These qualities make it excellent for radar systems, interaction components, and onboard electronic devices where failure is not an option.

Automotive Electronic devices

Modern cars rely heavily on digital control systems. The 96% alumina PCB substrate sustains ignition systems, sensing units, and electrical vehicle power modules. It stays secure even when engine warm increases. Its longevity ensures long-lasting function without signal loss or malfunction.

Industrial Equipment

Factories use hard electronics that need to run continuously. Alumina ceramic substratums handle this demand well. They sustain electric motor drives, inverters, and high-power changing circuits. Their low thermal growth prevents fractures during repeated heating and cooling down cycles.

Medical Gadgets

Accuracy issues in clinical tools. The 96% alumina substratum supplies a tidy, secure base for imaging systems, surgical tools, and diagnostic equipment. It does not interfere with delicate signals. And also, it meets strict biocompatibility and sanitation standards.

These substrates combine toughness, thermal management, and electric performance in one trustworthy package. Designers choose them when common products fail. Whether in limited areas or extreme environments, 96% alumina provides consistent outcomes you can trust.


Company Profile

Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.


Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.


Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

ai-the-30-1774949366954
High Quality 96% Alumina (Al2O3) PCB Ceramic Substrate

5 FAQs of High Quality 96% Alumina (Al2O3) PCB Ceramic Substrate

Frequently Asked Questions About High-Quality 96% Alumina Ceramic PCB Substrates

What is a 96% alumina ceramic substrate?

A 96% alumina (Al₂O₃) ceramic substrate is a base material used in printed circuit boards. It contains 96% aluminum oxide and 4% other additives. This mix gives it strong mechanical support, good electrical insulation, and excellent heat resistance.

Why choose 96% alumina over other materials?

This material offers a great balance of cost and performance. It handles high temperatures well, resists wear, and insulates electricity effectively. Compared to standard FR-4 boards, it works better in demanding environments like power electronics or LED lighting.

How does thermal conductivity affect performance?

The thermal conductivity of 96% alumina is about 20–24 W/m·K. This means it moves heat away from components quickly. Good heat flow helps devices run cooler and last longer, especially in high-power applications.

Is this substrate compatible with standard PCB processes?

Yes. You can use common thick-film or thin-film techniques to print circuits on it. Metallization layers like silver, gold, or copper work well. The surface is smooth and stable, which supports fine-line printing and reliable bonding.

Where are these substrates commonly used?

They are used in many industries. Examples include automotive sensors, industrial power modules, medical devices, RF packages, and high-brightness LEDs. Any application needing durability, thermal management, and electrical isolation often uses 96% alumina substrates.

REQUEST A QUOTE

REQUEST A QUOTE