High Sensitivity Alumina Ceramic Rod / Shaft for Electroplating

PRODUCT PARAMETERS

Description
REQUEST A QUOTE

Description

Overview of High Sensitivity Alumina Ceramic Rod / Shaft for Electroplating

Alumina Ceramic, or Aluminum Oxide (Al₂O₃), is the most widely used and versatile advanced ceramic material. Known for its excellent balance of mechanical, thermal, and electrical properties, it is a cost-effective solution for a vast array of demanding industrial applications. Alumina components are produced in purity levels ranging from 85% to 99.9%, with properties enhancing as purity increases.

Features of High Sensitivity Alumina Ceramic Rod / Shaft for Electroplating

  • High Hardness & Wear Resistance: Offers exceptional resistance to abrasion and mechanical wear.
  • Excellent Electrical Insulation: Maintains high electrical resistivity even at elevated temperatures.
  • Good Thermal Conductivity: (For a ceramic) effectively dissipates heat, especially in higher purity grades.
  • High Compressive Strength: Capable of withstanding significant mechanical loads.
  • Chemical Inertness: Highly resistant to corrosion from acids, alkalis, and molten metals.
  • Cost-Effectiveness: Provides superior performance at a lower cost compared to many other technical ceramics.
ai-Aluminum-1-1775785167753
High Sensitivity Alumina Ceramic Rod / Shaft for Electroplating

Specifications of High Sensitivity Alumina Ceramic Rod / Shaft for Electroplating

High Sensitivity Alumina Porcelain Pole/ Shaft for Electroplating

Product and Purity

This ceramic rod is made from high-purity alumina (Al two O ₃). The material consists of at least 99.5% alumina. This level of pureness guarantees superb electrical insulation and strong resistance to chemical rust. It remains stable even in aggressive electroplating baths.

Trick Physical Properties

The rod has a density of 3.90– 3.95 g/cm FOUR. Its firmness reaches 1500– 1700 HV on the Vickers scale. These residential or commercial properties provide it impressive wear resistance and mechanical strength. The flexural toughness is typically above 350 MPa. Thermal conductivity is around 28– 30 W/m · K, which aids take care of heat throughout procedure.

Electric Efficiency

Quantity resistivity goes beyond 1 × 10 ¹⁴ Ω · centimeters at area temperature. Dielectric toughness is above 12 kV/mm. These worths make the pole perfect for applications that require accurate electric control and minimal signal disturbance.

Dimensional Accuracy

Each rod is manufactured to limited resistances. Diameter resistance is ± 0.02 mm. Length tolerance is ± 0.1 mm. Straightness is held within 0.05 mm per 100 mm of length. These specifications make sure reputable fit and positioning in sensitive electroplating fixtures.

Surface area End up

The surface roughness (Ra) is ≤ 0.2 μm after fine sprucing up. A smooth finish minimizes bit accumulation and protects against issues in plated layers. It also makes cleansing easier between manufacturing runs.

Running Conditions

The rod executes well in temperatures as much as 1600 ° C in air. It resists typical plating chemicals like acids, alkalis, and metal salts. No outgassing or degradation takes place under typical electroplating problems.

Applications

Utilize this ceramic shaft as a protecting support, guide pole, or noticing element in accuracy electroplating systems. It works well in electronics making, semiconductor processing, and premium attractive plating lines where stability and cleanliness are important.

ai-7-15-1774950505406
High Sensitivity Alumina Ceramic Rod / Shaft for Electroplating

Applications of High Sensitivity Alumina Ceramic Rod / Shaft for Electroplating

High Level Of Sensitivity Alumina Ceramic Poles and Shafts for Electroplating

Accuracy Elements Constructed for Demanding Atmospheres

Alumina ceramic poles and shafts offer unequaled efficiency in electroplating applications. These components are made from high-purity alumina, which gives them outstanding electric insulation and strong resistance to deterioration. They remain stable also when subjected to harsh chemicals and heats typically found in layering baths.

Why pick alumina ceramic?
Unlike steel or plastic options, alumina does not respond with acidic or alkaline solutions. This implies it will not contaminate the plating remedy or deteriorate gradually. Its smooth surface area additionally protects against unwanted buildup of deposits, helping maintain consistent plating high quality.

These ceramic parts are frequently made use of as support rods, guide shafts, or insulating spacers inside electroplating storage tanks. Their high dimensional accuracy makes certain correct alignment of parts throughout the plating procedure. Limited resistances lower wear and prolong equipment life.

Trusted under stress
Alumina ceramic preserves its form and toughness also after long exposure to heat and chemical tension. It resists thermal shock, so unexpected temperature changes will certainly not cause breaking. This integrity minimizes downtime and maintenance costs in production lines.

Suppliers trust alumina ceramic rods due to the fact that they supply regular outcomes set after batch. The product’s firmness likewise reduces abrasion from relocating components, keeping systems running efficiently.

In other words, high level of sensitivity alumina ceramic rods and shafts fix typical problems in electroplating– like contamination, wear, and instability– by offering a tidy, long lasting, and electrically inert option. Their efficiency makes them essential in sectors that demand accuracy and pureness, such as electronic devices, aerospace, and clinical device production.


Company Profile

Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.


Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.


Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

ai-what-23-1774950478090
High Sensitivity Alumina Ceramic Rod / Shaft for Electroplating

5 FAQs of High Sensitivity Alumina Ceramic Rod / Shaft for Electroplating

High Sensitivity Alumina Ceramic Rod / Shaft for Electroplating – Top 5 FAQs

What makes alumina ceramic rods ideal for electroplating?

Alumina ceramic rods resist corrosion and handle high temperatures well. They do not react with most plating chemicals. This keeps the plating process stable and clean.

Why is “high sensitivity” important in these rods?

High sensitivity means the rod responds quickly and accurately to small changes in electrical current or temperature. This helps maintain consistent plating quality, especially in precision applications.

Can these rods withstand long-term use in harsh plating baths?

Yes. These rods are made from dense, high-purity alumina. They stay strong even after long exposure to acidic or alkaline solutions. Their surface stays smooth and does not degrade easily.

How do I install or replace an alumina ceramic shaft?

Handle the rod carefully—it is hard but can crack under sudden impact. Fit it into your system using compatible holders or fixtures. Make sure it aligns properly to avoid stress during operation.

Are custom sizes available for specific plating setups?

Yes. Most manufacturers offer rods in different diameters and lengths. You can request tight tolerances if your setup needs exact dimensions. Just share your specs when placing the order.

REQUEST A QUOTE

REQUEST A QUOTE