Next-Generation Ceramics: Unlocking Superior Properties for Industry
PRODUCT PARAMETERS
Description
Overview of Air pressure sintered mirror polishing silicon nitride plate
Silicon Nitride (Si₃N₄) is a high-performance ceramic celebrated for its exceptional combination of fracture toughness, thermal shock resistance, and high-temperature strength. It is the material of choice for the most demanding structural applications involving severe thermal and mechanical stress, such as in advanced engines and bearings.
Features of Air pressure sintered mirror polishing silicon nitride plate
- High Fracture Toughness: Exceptional resistance to crack propagation and mechanical shock compared to other ceramics.
- Outstanding Thermal Shock Resistance: Can withstand the most severe and rapid temperature fluctuations.
- High Strength at Elevated Temperatures: Retains its mechanical properties up to 1200-1300°C in air.
- Low Density & High Hardness: Lightweight and very wear-resistant.
- Good Creep Resistance: Resists deformation under sustained load at high temperatures.
- Excellent Rolling Contact Fatigue Life: Superior to steel in bearing applications.

Specifications of Air pressure sintered mirror polishing silicon nitride plate
Requirements of Atmospheric Pressure Sintered Mirror Sprucing Up Silicon Nitride Plate
Product and Manufacturing Process
This plate is made from high-purity silicon nitride (Si four N FOUR) using air pressure sintering. The procedure guarantees a dense, uniform microstructure with minimal porosity. No additives that weaken performance are used. The result is a solid, dependable ceramic component appropriate for requiring polishing tasks.
Secret Physical Properties
The plate has a density of 3.20– 3.25 g/cm FIVE. Its firmness gets to 15– 17 GPa on the Vickers range. Flexural toughness is usually 800– 950 MPa. Crack sturdiness varies from 6.0 to 7.5 MPa · m 1ST/ TWO. These worths sustain lengthy service life under mechanical tension and duplicated use.
Surface End Up and Flatness
After mirror polishing, the surface area roughness is listed below 0.01 µm Ra. Flatness resistance meets λ/ 10 or far better over the complete surface area, where λ amounts to 632.8 nm. This degree of accuracy is important for optical and semiconductor applications where even small inconsistencies impact performance.
Thermal and Chemical Resistance
The plate withstands continual use at temperature levels up to 1,200 ° C in air. It resists thermal shock well because of low thermal expansion (concerning 3.0 × 10 ⁻⁶/ K from 25– 800 ° C). It also reveals excellent resistance to acids, alkalis, and molten steels, making it excellent for extreme chemical settings.
Dimensional Options
Requirement sizes vary from 50 mm to 300 mm. Density choices consist of 5 mm, 10 mm, and 15 mm. Custom shapes and sizes are offered upon demand. All plates undergo rigorous quality control to make certain dimensional precision within ± 0.01 mm.
Applications
These plates are widely used in precision lapping and polishing of wafers, optical lenses, and hard disk substrates. Their security, flatness, and use resistance make them a top choice in high-end manufacturing procedures.

Applications of Air pressure sintered mirror polishing silicon nitride plate
Applications of Air Pressure Sintered Mirror Polishing Silicon Nitride Plate
High-Performance Industrial Elements
Air pressure sintered mirror polishing silicon nitride plates are extensively utilized sought after commercial atmospheres. Their exceptional hardness and thermal security make them ideal for parts that encounter severe warm, wear, or chemical direct exposure. These plates function as important parts in semiconductor production equipment, where precision and sanitation are non-negotiable.
Advanced Optics and Laser Solutions
The mirror-like surface coating achieved with polishing allows these silicon nitride plates to work successfully in optical systems. They reflect light with marginal distortion, which is vital for laser placement devices, interferometers, and high-resolution imaging tools. Their low thermal growth ensures regular performance even under rapid temperature level changes.
Aerospace and Protection Uses
In aerospace applications, integrity under anxiety is necessary. These plates stand up to intense resonance, shock, and broad temperature swings without splitting or flawing. They are integrated into advice systems, sensor real estates, and engine parts where steel alternatives would certainly fall short because of weight or rust problems.
Medical and Scientific Instruments
Silicon nitride’s biocompatibility and resistance to sanitation processes make it ideal for medical gadgets. Mirror-polished plates show up in diagnostic equipment, surgical tools, and lab-on-a-chip platforms. Their smooth, non-porous surface avoids contamination and supports exact dimensions in delicate experiments.
Electronics and Wafer Processing
Throughout semiconductor wafer manufacture, any type of particle contamination can ruin whole batches. The ultra-clean surface area of these plates lessens fragment dropping. They work as assistance components, chucks, or shielding layers inside etching, deposition, and lithography makers– keeping dimensional accuracy across thousands of manufacturing cycles.
Sturdiness meets precision.
Many thanks to air pressure sintering and progressed polishing strategies, these silicon nitride plates deliver unparalleled mechanical toughness along with optical-grade smoothness. This combination enables designers to solve hard challenges across several high-tech areas.
Company Profile
Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.
Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.

Payment Methods
T/T, Western Union, Paypal, Credit Card etc.
Shipment Methods
By air, by sea, by express, as customers request.

5 FAQs of Air pressure sintered mirror polishing silicon nitride plate
Frequently Asked Questions
What is air pressure sintered silicon nitride?
Air pressure sintered silicon nitride is a high-performance ceramic made by heating silicon nitride powder under nitrogen gas pressure. This process creates a very dense and strong material. It resists heat, wear, and corrosion better than many other ceramics.
Why use it for mirror polishing plates?
These plates need to stay flat, hard, and stable during polishing. Air pressure sintered silicon nitride offers excellent hardness and thermal stability. It does not warp easily under heat or pressure. That makes it ideal for achieving smooth, precise mirror finishes.
How long does the plate last?
The plate lasts much longer than metal or standard ceramic alternatives. Its high wear resistance means it maintains surface quality over thousands of polishing cycles. Proper handling and cleaning help extend its life even more.
Is it safe to use with common polishing slurries?
Yes. The material is chemically inert. It works well with water-based and oil-based slurries. It will not react with most acids, alkalis, or solvents used in standard polishing processes.
Can the plate be reconditioned or repaired?
Minor surface wear can often be removed by lapping or fine grinding. However, deep cracks or chips usually mean the plate must be replaced. Regular inspection helps catch small issues before they become serious. Always follow the manufacturer’s care instructions to keep the plate in good condition.
REQUEST A QUOTE
RELATED PRODUCTS
High strength metallized silicon nitride ceramic substrate
Factory manufactured high precision silicon nitride ceramic ball
High hardness wear resistant silicon nitride ceramic roller
Electronic custom silicon nitride ceramic stop rail guide
Customized silicon nitride ceramic ball bearing ball


