Overview of Double side mirror polish thin silicon nitride ceramic chip
Silicon Nitride (Si₃N₄) is a high-performance ceramic celebrated for its exceptional combination of fracture toughness, thermal shock resistance, and high-temperature strength. It is the material of choice for the most demanding structural applications involving severe thermal and mechanical stress, such as in advanced engines and bearings.
Features of Double side mirror polish thin silicon nitride ceramic chip
High Fracture Toughness: Exceptional resistance to crack propagation and mechanical shock compared to other ceramics.
Outstanding Thermal Shock Resistance: Can withstand the most severe and rapid temperature fluctuations.
High Strength at Elevated Temperatures: Retains its mechanical properties up to 1200-1300°C in air.
Low Density & High Hardness: Lightweight and very wear-resistant.
Good Creep Resistance: Resists deformation under sustained load at high temperatures.
Excellent Rolling Contact Fatigue Life: Superior to steel in bearing applications.
Double side mirror polish thin silicon nitride ceramic chip
Specifications of Double side mirror polish thin silicon nitride ceramic chip
This chip is made from high-purity silicon nitride (Si five N ₄) ceramic. The material uses solid mechanical performance and exceptional thermal stability. Its fine-grained structure makes sure uniform residential or commercial properties throughout the entire piece. The chip is thin, with limited thickness control to fulfill precision application needs.
Surface area Finish
Both sides of the chip receive a mirror polish surface. This causes an ultra-smooth surface with a roughness value below 0.5 nm Ra. The refined surface areas show light plainly and lower spreading. Such coating is essential for optical placement, laser systems, and high-precision sensing applications.
Key Specs
Thickness: Offered from 0.1 mm to 0.5 mm, with resistance as tight as ± 0.01 mm. Diameter or measurements: Customized sizes up to 50 mm; common round and square styles are in stock. Flatness: Normally λ/ 10 or better at 632.8 nm wavelength. Parallelism: Much less than 30 arcseconds between 2 faces. Density: ≥ 3.2 g/cm TWO. Hardness: Vickers solidity around 15– 17 Grade point average. Thermal growth coefficient: About 3.2 × 10 ⁻⁶/ ° C (from 25 ° C to
800 ° C). Performance Advantages
Silicon nitride resists thermal shock far better than several various other ceramics. It preserves strength at heats and shows low wear sought after environments. The double-side gloss lessens surface area defects, which assists stop crack initiation under anxiety. These chips work well in vacuum cleaner, high-radiation, and destructive setups where metals or polymers would stop working.
Normal Makes use of
These chips offer in semiconductor manufacturing devices, optical places, wafer handling components, and inertial advice systems. They additionally support research study in quantum tools and advanced photonics because of their dimensional security and clean surface quality.
Double side mirror polish thin silicon nitride ceramic chip
Applications of Double side mirror polish thin silicon nitride ceramic chip
Applications of Double-Side Mirror Polish Thin Silicon Nitride Ceramic Chips
High-Precision Optical Solutions
Double-side mirror polish thin silicon nitride ceramic chips are widely utilized in optical tools that need extreme flatness and smooth surface areas. Their sleek coating reduces light scattering. This makes them excellent for lenses, light beam splitters, and laser tooth cavities where quality and accuracy matter.
Semiconductor Production
These chips function as important elements in wafer processing devices. Their thermal security and mechanical toughness permit them to perform dependably under heats and extreme chemical environments. The mirror-like surface area also helps with precise alignment during lithography and evaluation steps.
Advanced Sensors and MEMS Instruments
In micro-electromechanical systems (MEMS), the ultra-smooth surface of these chips reduces rubbing and wear. This improves level of sensitivity and prolongs gadget life. They are often discovered in pressure sensing units, accelerometers, and gyroscopes used in auto and aerospace applications.
Medical Imaging Tools
The biocompatibility and chemical inertness of silicon nitride make these chips ideal for clinical tools. Their polished surfaces support high-resolution imaging in endoscopes and diagnostic scanners. Cleanability is an additional benefit– essential in sterile medical settings.
Research and Research Laboratory Usage
Researchers rely on these chips as substrates for experiments requiring very little surface area disturbance. Whether in electron microscopy or spectroscopy, the consistent monotony and reduced defect density aid generate repeatable, credible outcomes.
Aerospace and Protection Parts
Because of their resistance to thermal shock and capability to maintain form under stress and anxiety, these chips are used in advice systems and infrared windows. The double-side polish makes certain optical efficiency remains steady even in rapidly altering problems.
Company Profile
Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.
Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.
Payment Methods
T/T, Western Union, Paypal, Credit Card etc.
Shipment Methods
By air, by sea, by express, as customers request.
Double side mirror polish thin silicon nitride ceramic chip
5 FAQs of Double side mirror polish thin silicon nitride ceramic chip
What is a double-side mirror polish thin silicon nitride ceramic chip?
This chip is made from high-purity silicon nitride. Both sides are polished to a mirror finish. The material is strong, heat-resistant, and electrically insulating. It is very thin, often under 0.5 mm, which makes it ideal for precision applications.
Why choose silicon nitride over other ceramics?
Silicon nitride has better toughness and thermal shock resistance than alumina or zirconia. It does not crack easily under rapid temperature changes. Its low thermal expansion also helps maintain shape and size in demanding environments.
What applications use this type of chip?
These chips are used in semiconductor manufacturing, laser systems, and optical sensors. Their smooth surface reduces light scattering. The flatness and parallelism support accurate alignment in micro-devices and wafer handling tools.
How thin can these chips be while keeping strength?
They can be as thin as 0.1 mm and still stay strong. The fine-grain structure of silicon nitride gives it high mechanical reliability even at small thicknesses. Proper polishing also removes surface flaws that could weaken the chip.
Are both sides really mirror-polished?
Yes. Both sides undergo precision lapping and polishing. Surface roughness is typically below 1 nm Ra. This level of finish ensures minimal distortion for optical or metrology uses and allows direct bonding in cleanroom processes.