Gas pressure sintering silicon nitride ceramic bar block

PRODUCT PARAMETERS

Description
REQUEST A QUOTE

Description

Overview of Gas pressure sintering silicon nitride ceramic bar block

Silicon Nitride (Si₃N₄) is a high-performance ceramic celebrated for its exceptional combination of fracture toughness, thermal shock resistance, and high-temperature strength. It is the material of choice for the most demanding structural applications involving severe thermal and mechanical stress, such as in advanced engines and bearings.

Features of Gas pressure sintering silicon nitride ceramic bar block

  • High Fracture Toughness: Exceptional resistance to crack propagation and mechanical shock compared to other ceramics.
  • Outstanding Thermal Shock Resistance: Can withstand the most severe and rapid temperature fluctuations.
  • High Strength at Elevated Temperatures: Retains its mechanical properties up to 1200-1300°C in air.
  • Low Density & High Hardness: Lightweight and very wear-resistant.
  • Good Creep Resistance: Resists deformation under sustained load at high temperatures.
  • Excellent Rolling Contact Fatigue Life: Superior to steel in bearing applications.
ai-aluminum-7-1775287479953
Gas pressure sintering silicon nitride ceramic bar block

Specifications of Gas pressure sintering silicon nitride ceramic bar block

Gas Pressure Sintered Silicon Nitride Porcelain Bar Block– Technical Specifications

Product Make-up

Primary stage: β-silicon nitride (Si four N FOUR).
Additives: Percentages of yttria (Y TWO O THREE) and alumina (Al ₂ O FIVE) to support densification during sintering.
Pureness: ≥ 95% Si Two N ₄ by weight.

Physical Qualities

Thickness: 3.20– 3.25 g/cm SIX.
Porosity: Less than 1% (totally dense framework).
Color: Light gray to dark gray, uniform surface area coating.
Dimensions: Requirement bar blocks variety from 10 mm × 10 mm × 50 mm as much as 50 mm × 50 mm × 200 mm; custom-made dimensions readily available upon demand.

Mechanical Efficiency

Flexural strength: 800– 1000 MPa at space temperature level.
Fracture sturdiness: 6.5– 8.0 MPa · m ¹/ TWO.
Firmness (Vickers): 14– 16 Grade point average.
Elastic modulus: 290– 310 Grade point average.

Thermal Qualities

Maximum solution temperature level: As much as 1200 ° C in air.
Thermal conductivity: 20– 30 W/( m · K).
Coefficient of thermal growth: 3.0– 3.2 × 10 ⁻⁶/ ° C (from 25 ° C to
800 ° C). Thermal shock resistance: Outstanding– appropriate for quick heating and cooling down cycles.

Manufacturing Refine

Produced utilizing gas pressure sintering (GPS) under nitrogen ambience at temperatures over 1700 ° C. This technique avoids decay of silicon nitride and makes certain high density without open pores. Each block undergoes stringent quality assurance, consisting of ultrasonic assessment and dimensional confirmation.

Applications

Suitable for high-performance components sought after atmospheres such as bearing rollers, cutting devices, molten steel managing components, and architectural parts in aerospace and vehicle systems. The product’s mix of toughness, strength, and thermal stability makes it a reputable selection where metals or standard porcelains fail.

ai-aluminum-13-1774949576808
Gas pressure sintering silicon nitride ceramic bar block

Applications of Gas pressure sintering silicon nitride ceramic bar block

Applications of Gas Pressure Sintered Silicon Nitride Porcelain Bar Blocks

High-Performance Industrial Components

Gas pressure sintered silicon nitride ceramic bar blocks are commonly utilized to make components that should work under hard conditions. These parts deal with high anxiety, extreme warm, and quick wear. Usual examples consist of cutting tools, bearings, and rollers in metal processing. The material keeps its strength even when temperature levels climb above 1,000 ° C.

Automotive and Aerospace Solutions

In cars and trucks and aircraft, these ceramic blocks help develop lighter, a lot more efficient engines and wind turbines. They are used for turbocharger blades, shutoff train components, and seal rings. Their reduced density reduce weight. Their thermal shock resistance makes sure safety and security throughout fast temperature level changes.

Energy and Power Equipment

Power generation systems additionally rely upon this sophisticated ceramic. It is discovered in components for gas turbines, warmth exchangers, and combustion chambers. The product withstands oxidation and corrosion from hot gases. This makes it perfect for long-lasting use in extreme power environments.

Medical and Accuracy Instruments

Silicon nitride’s biocompatibility opens doors in medical gadget production. Bar blocks are machined into medical devices and implantable parts. In laboratories and manufacturing facilities, they serve as wear-resistant guides, nozzles, and insulators where accuracy matters most.

Why Select Gas Pressure Sintered Silicon Nitride?
This procedure creates a thick, consistent microstructure with virtually no pores. That suggests much better mechanical toughness, greater sturdiness, and much longer service life contrasted to various other porcelains. Developers choose it when integrity and performance can not be compromised. Bench block kind enables simple machining into custom forms without losing core residential or commercial properties.


Company Profile

Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.


Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.


Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

ai-the-11-1774948788581
Gas pressure sintering silicon nitride ceramic bar block

5 FAQs of Gas pressure sintering silicon nitride ceramic bar block

Common Questions About Gas Pressure Sintered Silicon Nitride Ceramic Bar Blocks

What is gas pressure sintering?

Gas pressure sintering is a special high-temperature process. It uses nitrogen gas under pressure to help silicon nitride parts become dense and strong. This method stops the material from breaking down at high heat. The result is a ceramic block with very few pores and excellent mechanical properties.

Why choose silicon nitride over other ceramics?

Silicon nitride stands out because it handles stress, heat, and wear better than most technical ceramics. It keeps its strength even at high temperatures. It also resists thermal shock well. These traits make it ideal for tough industrial jobs like bearings, cutting tools, and engine parts.

Are these bar blocks fully dense?

Yes. Gas pressure sintering produces near-theoretical density. That means almost no open pores remain in the final product. High density gives the block better strength, toughness, and reliability in demanding applications.

Can you machine these blocks after sintering?

Machining after sintering is very hard due to the material’s extreme hardness. Most customers shape the part close to final size before sintering. If minor adjustments are needed afterward, diamond grinding is the only practical method.

What industries use this material?

Industries that need high performance under stress or heat rely on gas pressure sintered silicon nitride. You’ll find it in automotive turbochargers, metal cutting tools, aerospace components, and semiconductor manufacturing equipment. Its mix of strength, light weight, and thermal stability makes it a top choice where failure is not an option.

REQUEST A QUOTE

REQUEST A QUOTE