Gas pressure sintering silicon nitride ceramic dowel pin

PRODUCT PARAMETERS

Description
REQUEST A QUOTE

Description

Overview of Gas pressure sintering silicon nitride ceramic dowel pin

Silicon Nitride (Si₃N₄) is a high-performance ceramic celebrated for its exceptional combination of fracture toughness, thermal shock resistance, and high-temperature strength. It is the material of choice for the most demanding structural applications involving severe thermal and mechanical stress, such as in advanced engines and bearings.

Features of Gas pressure sintering silicon nitride ceramic dowel pin

  • High Fracture Toughness: Exceptional resistance to crack propagation and mechanical shock compared to other ceramics.
  • Outstanding Thermal Shock Resistance: Can withstand the most severe and rapid temperature fluctuations.
  • High Strength at Elevated Temperatures: Retains its mechanical properties up to 1200-1300°C in air.
  • Low Density & High Hardness: Lightweight and very wear-resistant.
  • Good Creep Resistance: Resists deformation under sustained load at high temperatures.
  • Excellent Rolling Contact Fatigue Life: Superior to steel in bearing applications.
ai-what-24-1774950536874
Gas pressure sintering silicon nitride ceramic dowel pin

Specifications of Gas pressure sintering silicon nitride ceramic dowel pin

Gas Pressure Sintered Silicon Nitride Porcelain Dowel Pin– Technical Specifications

Material Make-up

Key product: High-purity silicon nitride (Si five N ₄).
The dowel pins are used gas pressure sintering. This procedure gives the product outstanding thickness and uniform microstructure. No additives that damage efficiency are used.

Physical Features

Density: ≥ 3.20 g/cm TWO.
Hardness (Vickers): 1500– 1700 HV.
Flexural strength: 800– 1000 MPa.
Crack toughness: 6.0– 8.0 MPa · m ¹/ ².
These worths mirror regular mechanical efficiency under high stress and anxiety and wear conditions.

Thermal Characteristics

Optimum solution temperature level: 1200 ° C in air.
Thermal conductivity: 20– 30 W/( m · K).
Coefficient of thermal development (20– 800 ° C): 3.0 × 10 ⁻⁶/ ° C.
The pins preserve form and toughness even with fast temperature changes.

Dimensional Tolerances

Standard size resistance: ± 0.005 mm.
Length tolerance: ± 0.02 mm.
Satiation: ≤ 0.003 mm.
Surface area surface: Ra ≤ 0.2 μm.
Custom-made resistances are readily available upon request for precision-fit applications.

Chemical Resistance

The material resists oxidation, acids, and antacid. It carries out well in rough chemical settings. It does not corrode like steel pins.

Applications

These dowel pins work in high-performance setups such as aerospace settings up, semiconductor production equipment, auto engines, and commercial equipment. They replace metal pins where heat, wear, or electrical insulation matter.

Quality Assurance

Every set goes through strict evaluation. Tests consist of dimensional checks, thickness confirmation, and strength recognition. Certifications of uniformity are provided with each order.

ai-aluminum-19-1774949937917
Gas pressure sintering silicon nitride ceramic dowel pin

Applications of Gas pressure sintering silicon nitride ceramic dowel pin

Applications of Gas Pressure Sintered Silicon Nitride Porcelain Dowel Pins

High Efficiency in Demanding Settings

Gas pressure sintered silicon nitride ceramic dowel pins use phenomenal strength and reliability. These pins maintain components straightened with fantastic accuracy. They work well where metal pins fall short. Their product withstands wear, corrosion, and high temperatures. This makes them excellent for hard industrial setups.

Aerospace and Defense
In aerospace systems, positioning needs to stay excellent under extreme tension. Silicon nitride dowel pins deal with quick temperature changes and hefty lots without flawing. Jet engines, touchdown equipment, and guidance systems all utilize these pins to maintain limited tolerances and long service life.

Semiconductor Production
Sanitation and stability issue most in chip manufacturing. Metal components can contaminate delicate processes. Ceramic dowel pins do not corrosion or shed fragments. They likewise resist chemicals used in etching and cleaning. Equipment like wafer trainers and examination tools depend on them for exact positioning.

Automotive and Racing
High-speed engines and transmissions need elements that last. Silicon nitride dowel pins minimize friction and stand up to heat up much better than steel. They assist keep engine blocks, gearboxes, and turbochargers correctly straightened throughout extreme procedure. Race groups select them for consistent efficiency in time.

Medical Gadgets
Surgical devices and imaging equipments need non-magnetic, biocompatible components. These ceramic pins satisfy stringent clinical criteria. They do not conflict with MRI tools. Their smooth surface avoids microbial build-up. Accuracy tools count on them for secure, repeatable feature.

Makers depend on gas stress sintered silicon nitride due to the fact that it delivers consistent thickness and great grain framework. The outcome is a dowel pin that remains dimensionally secure, also after years of use. Whether in vacuum chambers, saltwater exposure, or high-vibration configurations, these pins do without concession.


Company Profile

Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.


Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.


Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

ai-a-1-1774949588252
Gas pressure sintering silicon nitride ceramic dowel pin

5 FAQs of Gas pressure sintering silicon nitride ceramic dowel pin

Frequently Asked Questions About Gas Pressure Sintered Silicon Nitride Ceramic Dowel Pins

What is a gas pressure sintered silicon nitride ceramic dowel pin?

It is a precision alignment pin made from high-performance silicon nitride ceramic. The material is formed under high temperature and nitrogen gas pressure. This process creates a dense, strong structure with excellent mechanical properties.

Why choose silicon nitride over metal or other ceramics?

Silicon nitride is lighter than steel but much harder. It resists wear, corrosion, and high temperatures better than most metals. Unlike alumina or zirconia, it has higher fracture toughness and thermal shock resistance. These features make it ideal for demanding applications.

Where are these dowel pins commonly used?

They are used in aerospace, semiconductor manufacturing, and high-speed machinery. Any place that needs precise alignment, low thermal expansion, and long service life benefits from these pins. They also work well in vacuum or corrosive environments where metals fail.

How accurate are the dimensions of these pins?

Gas pressure sintering allows tight control over size and shape. After sintering, pins are ground to meet exact tolerances—often within ±0.001 mm. This ensures reliable fit and function in critical assemblies.

Are these pins brittle or prone to breaking?

While all ceramics can break under sharp impact, silicon nitride is one of the toughest engineering ceramics available. Its microstructure gives it good resistance to cracking during normal use. Proper handling and installation prevent damage in most industrial settings.

REQUEST A QUOTE

REQUEST A QUOTE