Next-Generation Ceramics: Unlocking Superior Properties for Industry
PRODUCT PARAMETERS
Description
Overview of High heat resistance guide pin ceramic positioning pin
Silicon Nitride (Si₃N₄) is a high-performance ceramic celebrated for its exceptional combination of fracture toughness, thermal shock resistance, and high-temperature strength. It is the material of choice for the most demanding structural applications involving severe thermal and mechanical stress, such as in advanced engines and bearings.
Features of High heat resistance guide pin ceramic positioning pin
- High Fracture Toughness: Exceptional resistance to crack propagation and mechanical shock compared to other ceramics.
- Outstanding Thermal Shock Resistance: Can withstand the most severe and rapid temperature fluctuations.
- High Strength at Elevated Temperatures: Retains its mechanical properties up to 1200-1300°C in air.
- Low Density & High Hardness: Lightweight and very wear-resistant.
- Good Creep Resistance: Resists deformation under sustained load at high temperatures.
- Excellent Rolling Contact Fatigue Life: Superior to steel in bearing applications.

Specifications of High heat resistance guide pin ceramic positioning pin
High Warm Resistance Overview Pin– Ceramic Positioning Pin Specs
Material & Building
This overview pin is made from high-purity alumina ceramic. The material uses exceptional thermal security and maintains its shape even under severe warm. It stands up to splitting, warping, or softening at temperatures as much as 1600 ° C (2912 ° F). The ceramic body is dense and non-porous, which protects against absorption of dampness or contaminants.
Dimensional Accuracy
Each pin is precision-ground to limited tolerances. Requirement diameters range from 1 mm to 20 mm, with lengths in between 5 mm and 100 mm. Custom dimensions are readily available upon request. Surface finish is smooth, usually Ra ≤ 0.2 µm, making sure consistent fit and minimal rubbing during assembly or operation.
Thermal Efficiency
Solid warm resistance is the core attribute of this pin. It executes reliably in continual high-temperature atmospheres like furnaces, sintering chambers, or glass-forming equipment. Thermal development is extremely reduced, so the pin stays dimensionally steady during fast heating or cooling cycles.
Mechanical Features
The pin has high compressive toughness– over 2000 MPa– and good wear resistance. It does not corrode, corrosion, or react with most chemicals. While it is tough and tight, treatment should be required to avoid sharp effects, as ceramics can chip under abrupt mechanical shock.
Applications
These pins are used in industries where steel parts would certainly fall short because of warm or chemical direct exposure. Typical usages include semiconductor production, aerospace tooling, injection molding dies, and high-temperature jigs. They supply accurate placement and long service life without maintenance.
Secret Advantages
– Works in temperature levels where metals flaw
– Electrically shielding and non-magnetic
– Withstands oxidation and chemical attack
– Maintains precision in time
– Lightweight compared to steel alternatives
All pins undergo stringent high quality checks prior to delivery to guarantee they meet efficiency and dimensional standards.

Applications of High heat resistance guide pin ceramic positioning pin
High Warmth Resistance Overview Pin: Accuracy You Can Rely Upon
Developed for Difficult Conditions
Our high warmth resistance guide pin is made from advanced ceramic materials. It deals with severe temperature levels without shedding shape or toughness. This makes it optimal for atmospheres where steel parts would certainly warp, wear away, or fall short. The pin stays stable also when things get hot– extremely warm.
Perfect Positioning, Every Time
These ceramic placing pins guarantee accurate placement in molds, dies, and tooling systems. Their limited dimensional tolerances mean components meshed precisely as designed. There’s no guesswork. No room for error. Just smooth, repeatable efficiency shift after shift.
Long Life, Low Upkeep
Ceramic withstands wear far better than steel or other steels. That means fewer replacements and less downtime. The surface area stays smooth, so there’s much less friction and much less possibility of damage to breeding components. You save time. You conserve money. And your production line maintains relocating.
Works Where Others Can not
In high-temperature processes like die casting, glass molding, or sintering, basic pins typically weaken swiftly. Our ceramic overview pins thrive in these setups. They don’t react with liquified materials. They will not stick. They won’t split under thermal shock. That reliability converts into regular product top quality and less rejects.
Simple to Install, Easy to Depend on
Developed to drop right into existing setups, these pins need no unique devices or alterations. When in place, they provide quiet, reputable service. Engineers and drivers alike value just how they just function– without difficulty or failing.
Pick a guide pin that withstands heat, wear, and stress. Our ceramic positioning solution offers you the accuracy and sturdiness required for today’s requiring manufacturing jobs.
Company Profile
Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.
Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.

Payment Methods
T/T, Western Union, Paypal, Credit Card etc.
Shipment Methods
By air, by sea, by express, as customers request.

5 FAQs of High heat resistance guide pin ceramic positioning pin
High Heat Resistance Guide Pin – Frequently Asked Questions
What is a ceramic positioning pin used for?
This pin keeps parts aligned during high-temperature processes like sintering, brazing, or heat treatment. It holds components in place so they do not shift or warp when exposed to extreme heat.
Why choose ceramic over metal pins?
Ceramic pins resist heat far better than most metals. They do not melt, deform, or react chemically at temperatures above 1,000°C. Metal pins may soften or corrode under the same conditions, but ceramic stays stable and strong.
How well does it handle thermal shock?
These pins are made from advanced ceramics like alumina or zirconia. They can go from cold to hot quickly without cracking. This makes them reliable in environments where temperature changes happen fast.
Are these pins wear-resistant?
Yes. Ceramic is very hard and resists abrasion. Even after repeated use in tough industrial settings, the pin surface stays smooth and precise. This helps maintain accurate part alignment over time.
Can I get custom sizes or shapes?
Most manufacturers offer custom options. You can request specific lengths, diameters, or tip designs based on your equipment or process needs. Just share your requirements, and they will produce pins that fit your setup exactly.
REQUEST A QUOTE
RELATED PRODUCTS
Custom high hardness strength black silicon nitride ceramic sleeve for industry
Custom silicon nitride ceramic pipe protection tubes
High performance silicon nitride ceramic rolls for erw
Non magnetic silicon nitride ceramic ball for electronics
cheap high polishing silicon nitride ceramic ball

