Pcb electronic silicon nitride ceramic sheet substrate

PRODUCT PARAMETERS

Description
REQUEST A QUOTE

Description

Overview of Pcb electronic silicon nitride ceramic sheet substrate

Silicon Nitride (Si₃N₄) is a high-performance ceramic celebrated for its exceptional combination of fracture toughness, thermal shock resistance, and high-temperature strength. It is the material of choice for the most demanding structural applications involving severe thermal and mechanical stress, such as in advanced engines and bearings.

Features of Pcb electronic silicon nitride ceramic sheet substrate

  • High Fracture Toughness: Exceptional resistance to crack propagation and mechanical shock compared to other ceramics.
  • Outstanding Thermal Shock Resistance: Can withstand the most severe and rapid temperature fluctuations.
  • High Strength at Elevated Temperatures: Retains its mechanical properties up to 1200-1300°C in air.
  • Low Density & High Hardness: Lightweight and very wear-resistant.
  • Good Creep Resistance: Resists deformation under sustained load at high temperatures.
  • Excellent Rolling Contact Fatigue Life: Superior to steel in bearing applications.
ai-choosing-18-1774949903202
Pcb electronic silicon nitride ceramic sheet substrate

Specifications of Pcb electronic silicon nitride ceramic sheet substrate

PCB Electronic Silicon Nitride Porcelain Sheet Substrate– Technical Specifications

Product Structure

The substrate is made from high-purity silicon nitride (Si three N FOUR) ceramic. This material provides strong mechanical performance and outstanding thermal stability. It contains minimal pollutants to guarantee constant electrical behavior.

Thermal Residences

Silicon nitride ceramic has a thermal conductivity of 80– 90 W/m · K. This enables efficient heat dissipation in high-power digital applications. The coefficient of thermal expansion (CTE) ranges from 2.5 to 3.2 ppm/ ° C (from 25 ° C to 800 ° C), which very closely matches numerous semiconductor products. This lowers stress and anxiety throughout temperature changes and boosts reliability.

Electrical Features

The dielectric constant is approximately 8.5 at 1 MHz. Dissipation variable stays below 0.001 under the same problems. Volume resistivity surpasses 1 × 10 ¹⁴ Ω · centimeters at area temperature level. These homes support secure signal transmission and reduced power loss popular circuit environments.

Mechanical Stamina

This ceramic sheet reveals high flexural stamina– usually above 800 MPa. Fracture durability reaches 6– 7 MPa · m ¹/ TWO, making it more resistant to splitting than many various other technical ceramics. Solidity is around 15– 16 GPa (Vickers), using excellent wear resistance throughout handling and assembly.

Dimensions and Resistances

Standard sheet density options consist of 0.25 mm, 0.38 mm, 0.5 mm, and 1.0 mm. Custom sizes are offered upon demand. Thickness tolerance is ± 0.02 mm for sheets under 0.5 mm thick, and ± 0.03 mm for thicker versions. Surface flatness is kept within ± 0.01 mm throughout a 25 mm span.

Surface area Complete

Both sides of the substratum are lapped and brightened to a surface area roughness of Ra ≤ 0.1 μm. This smooth finish ensures solid bond for metal layers and specific patterning throughout PCB fabrication.

Applications

This substratum suits high-reliability electronics, including power components, RF gadgets, LED plans, and sensing units running in rough settings. Its mix of thermal management, electric insulation, and mechanical durability makes it suitable for advanced PCB designs where standard materials fall short.

ai-how-25-1774949618045
Pcb electronic silicon nitride ceramic sheet substrate

Applications of Pcb electronic silicon nitride ceramic sheet substrate

Applications of PCB Electronic Silicon Nitride Ceramic Sheet Substrate

High-Power Electronic devices

Silicon nitride ceramic sheet substrates are widely used in high-power electronic circuits. These substrates handle big amounts of heat without shedding performance. They support gadgets like power modules, inverters, and electric motor drives. Their strong thermal conductivity keeps elements cool down during operation. This helps systems run longer and more accurately.

Electric Vehicles

Electric cars need parts that take care of warmth well and last a very long time. Silicon nitride substrates satisfy these needs. They are located in onboard chargers, battery administration systems, and power converters. The material withstands thermal shock, which prevails when lorries start or quit swiftly. Its mechanical stamina additionally protects fragile circuits from vibration and anxiety.

Aerospace and Defense Equipments

In aerospace and protection, reliability is critical. Silicon nitride ceramic substrates work well in extreme temperatures and extreme settings. They are used in radar systems, communication equipment, and avionics. The product’s reduced thermal growth indicates it remains secure even when temperature levels alter quickly. This security stops splits and failings in sensitive electronics.

Industrial Automation

Factories utilize automated systems that run nonstop. These systems depend upon durable motherboard. Silicon nitride substrates use exceptional electrical insulation and thermal monitoring. They are used in servo drives, commercial sensors, and control systems. Their resistance to put on and rust makes them suitable for hard industrial settings.

Renewable Resource Devices

Solar inverters and wind generator controllers require materials that do under constant load. Silicon nitride ceramic substratums supply constant thermal performance over time. They help transform energy effectively while decreasing system downtime. Their longevity supports the long service life anticipated in renewable setups.

Silicon nitride ceramic sheet substrates incorporate stamina, thermal control, and electrical reliability. These top qualities make them important in contemporary electronic devices where efficiency and safety and security can not be jeopardized.


Company Profile

Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.


Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.


Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

ai-how-11-1774947933840
Pcb electronic silicon nitride ceramic sheet substrate

5 FAQs of Pcb electronic silicon nitride ceramic sheet substrate

Frequently Asked Questions About PCB Silicon Nitride Ceramic Substrates

What is a silicon nitride ceramic substrate?

A silicon nitride ceramic substrate is a high-performance material used in printed circuit boards (PCBs). It offers strong mechanical strength, excellent thermal conductivity, and good electrical insulation. This makes it ideal for demanding electronic applications.

Why choose silicon nitride over other ceramic materials?

Silicon nitride stands out because it resists cracking better than alumina or aluminum nitride. It handles rapid temperature changes without breaking. Its thermal conductivity is also very good, which helps manage heat in power electronics.

Where are these substrates commonly used?

These substrates are often found in electric vehicles, industrial motor drives, LED lighting, and aerospace systems. Any application that needs reliable performance under high heat or heavy electrical loads can benefit from silicon nitride.

Can silicon nitride substrates be used with standard PCB processes?

Yes, they work with many standard PCB manufacturing steps. However, some adjustments may be needed for drilling or metallization due to the material’s hardness. Most suppliers offer pre-metallized options to simplify assembly.

How does silicon nitride affect product reliability?

Silicon nitride improves long-term reliability. It reduces the risk of failure caused by thermal stress or mechanical shock. Its stable structure keeps performance consistent over time, even in harsh environments. This leads to longer-lasting electronic devices.

REQUEST A QUOTE

REQUEST A QUOTE