Next-Generation Ceramics: Unlocking Superior Properties for Industry
PRODUCT PARAMETERS
Description
Overview of Silicon nitride ceramic weld location pins for welding
Silicon Nitride (Si₃N₄) is a high-performance ceramic celebrated for its exceptional combination of fracture toughness, thermal shock resistance, and high-temperature strength. It is the material of choice for the most demanding structural applications involving severe thermal and mechanical stress, such as in advanced engines and bearings.
Features of Silicon nitride ceramic weld location pins for welding
- High Fracture Toughness: Exceptional resistance to crack propagation and mechanical shock compared to other ceramics.
- Outstanding Thermal Shock Resistance: Can withstand the most severe and rapid temperature fluctuations.
- High Strength at Elevated Temperatures: Retains its mechanical properties up to 1200-1300°C in air.
- Low Density & High Hardness: Lightweight and very wear-resistant.
- Good Creep Resistance: Resists deformation under sustained load at high temperatures.
- Excellent Rolling Contact Fatigue Life: Superior to steel in bearing applications.

Specifications of Silicon nitride ceramic weld location pins for welding
Requirements of Silicon Nitride Porcelain Weld Place Pins
Material and Composition
These weld location pins are made from high-purity silicon nitride (Si five N FOUR) ceramic. The product consists of over 93% Si Six N ₄, with percentages of sintering additives like yttria and alumina. This composition gives the pins excellent mechanical stamina and thermal security.
Physical Residences
Density: 3.20– 3.30 g/cm THREE.
Solidity: 1500– 1650 HV (Vickers).
Flexural Toughness: 800– 1000 MPa.
Fracture Durability: 6.0– 7.5 MPa · m ¹/ ².
Thermal Expansion Coefficient: 3.0 × 10 ⁻⁶/ ° C (from 20 ° C to
800 ° C). Optimum Service Temperature: Approximately 1400 ° C in air.
Key Features
Silicon nitride ceramic pins resist wear, deterioration, and thermal shock better than steel or other ceramics. They do not conduct power, which prevents short circuits throughout welding. Their reduced thermal development keeps measurements steady under high heat. These pins remain precise also after repeated use in harsh welding atmospheres.
Dimensional Tolerances
Standard sizes range from 1.0 mm to 10.0 mm. Lengths vary from 5 mm to 50 mm. All pins are ground to limited tolerances:.
– Diameter resistance: ± 0.005 mm.
– Size tolerance: ± 0.02 mm.
– Satiation: ≤ 0.003 mm.
Custom-made sizes are available upon request.
Surface Finish
The surface roughness (Ra) is usually 0.2– 0.4 µm after fine grinding. A smooth coating minimizes friction and aids parts line up accurately throughout fixturing.
Applications
These pins work well in resistance welding, place welding, and robot welding configurations. They are used to situate and hold steel parts without altering surfaces or creating electric disturbance. Common markets include automobile, aerospace, battery manufacturing, and precision metal fabrication.

Applications of Silicon nitride ceramic weld location pins for welding
Applications of Silicon Nitride Ceramic Weld Location Pins
Why Pick Silicon Nitride for Welding Fixtures?
Silicon nitride ceramic weld area pins are commonly made use of in high-precision welding operations. These pins provide solid resistance to warmth, wear, and electrical conduction. Unlike metal pins, they do not perform electricity. This prevents arc strikes and secures delicate components during welding.
Welding processes typically involve high temperatures and duplicated call with molten metal. Metal pins can warp, break swiftly, or adhere to work surfaces. Silicon nitride pins remain steady under these tough problems. They keep their sizes and shape over time, which aids maintain limited tolerances in welded assemblies.
Key Utilizes in Manufacturing
Automotive and aerospace suppliers count on these ceramic pins for jig and component configurations. They hold sheet metal or stamped components in specific positions before and during welding. Due to the fact that silicon nitride is non-conductive, it prevents brief circuits in robot welding cells. This leads to fewer problems and less downtime.
In resistance welding, such as place welding, the pins serve as trustworthy locators without interfering with current flow. Their smooth surface area additionally minimizes rubbing and component damage. This is very important when working with coated or delicate products like galvanized steel or light weight aluminum.
Electronic devices and battery manufacturing additionally advantage. Right here, accuracy and cleanliness issue. Silicon nitride does not corrosion or shed fragments. It keeps the workplace tidy and makes sure constant part alignment.
These pins are very easy to install and change. They fit typical tooling systems and work well with automation tools. Shops that change from steel to ceramic pins often see longer device life and much better weld top quality.
Makers choose silicon nitride not just for performance but for price financial savings in time. Fewer substitutes, less scrap, and smoother manufacturing make these pins a wise financial investment for demanding welding tasks.
Company Profile
Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.
Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.

Payment Methods
T/T, Western Union, Paypal, Credit Card etc.
Shipment Methods
By air, by sea, by express, as customers request.

5 FAQs of Silicon nitride ceramic weld location pins for welding
Frequently Asked Questions About Silicon Nitride Ceramic Weld Location Pins
What are silicon nitride ceramic weld location pins used for?
These pins hold metal parts in place during welding. They keep components aligned so the weld stays accurate. Because they resist heat and do not conduct electricity, they protect sensitive areas from damage.
Why choose silicon nitride over other materials?
Silicon nitride handles high temperatures without cracking. It also resists wear better than metals or standard ceramics. Unlike steel pins, it will not stick to molten metal. This means fewer defects and less cleanup after welding.
Can these pins handle repeated use?
Yes. Silicon nitride is very strong and durable. It keeps its shape even after many heating and cooling cycles. Most users find these pins last much longer than traditional options.
Do they work with all types of welding?
They work well with common methods like MIG, TIG, and spot welding. Their non-conductive nature makes them safe near electrical arcs. Just make sure the pin size and shape match your fixture design.
How do I install or replace these pins?
Installation is simple. They fit into standard tooling holes just like metal dowels. No special tools are needed. If a pin gets damaged, remove it and press in a new one. Always check alignment before starting a new weld run.
REQUEST A QUOTE
RELATED PRODUCTS
Silicon nitride ceramic flat ring for coating equipment
High performance black silicon nitride ceramic pipe
Silicon nitride ceramic rollers high precision bearing
High precision silicon nitride ceramic ball for plastic materials
High strength wear resistant polished silicon nitride ceramic disc


