Boron Carbide Ceramic Monolithic Armor Panel

PRODUCT PARAMETERS

Description
REQUEST A QUOTE

Description

Overview of Boron Carbide Ceramic Monolithic Armor Panel

Boron Carbide (B₄C) is an ultra-hard, lightweight ceramic renowned as one of the hardest man-made materials, second only to cubic boron nitride and diamond. This exceptional hardness, combined with its low density, makes it the premier choice for extreme armor and abrasive applications under demanding conditions.

Features of Boron Carbide Ceramic Monolithic Armor Panel

  • Extreme Hardness: One of the hardest known substances (~9.5 Mohs), offering superior wear and abrasion resistance.
  • Very Low Density: Significantly lighter than metals and other armor ceramics like alumina and silicon carbide.
  • High Neutron Absorption Cross-Section: Excellent at absorbing neutrons, making it vital for nuclear reactor control rods and shielding.
  • Good Chemical Resistance: Inert to most acids and alkalis.
  • High Melting Point: Maintains structural integrity at very high temperatures.
ceramic crucible (29)
Boron Carbide Ceramic Monolithic Armor Panel

Specifications of Boron Carbide Ceramic Monolithic Armor Panel

Specifications of Boron Carbide Porcelain Monolithic Armor Panel

Product Make-up

Boron carbide (B FOUR C) is the primary product utilized in this shield panel. It has a pureness degree of 95% or higher. The ceramic structure is totally thick without any open pores. This gives the panel solid resistance versus high-velocity threats.

Physical Characteristics

The thickness of the panel ranges from 2.48 to 2.52 g/cm ³. Its firmness is above 30 GPa on the Vickers scale. This makes it among the hardest materials offered for body and vehicle shield. The compressive stamina goes beyond 3,000 MPa. Flexural strength is usually between 350 and 450 MPa.

Measurements and Resistances

Criterion density options include 6 mm, 8 mm, 10 mm, and 12 mm. Custom-made dimensions are also offered upon request. Length and size can be reduced to fit certain platform needs. Dimensional tolerance is held within ± 0.2 mm for thickness and ± 1.0 mm for length and size. Edge chamfering is applied to decrease breaking during handling and installation.

Ballistic Efficiency

This monolithic panel meets or surpasses NIJ Degree IV criteria. It can quit a single hit from a.30-06 M2 AP round taking a trip at 868 m/s. Multi-hit capacity relies on spacing and assistance structure however stays effective under regulated conditions. The panel functions best when backed by a fiber-composite layer such as UHMWPE or aramid.

Ecological Resistance

The ceramic panel shows excellent security across a vast temperature level range, from -40 ° Cto +150 ° C. It stands up to moisture, salt spray, and UV exposure without efficiency loss. No unique storage or dealing with past conventional ceramic preventative measures is needed.

B4C (32)
Boron Carbide Ceramic Monolithic Armor Panel

Applications of Boron Carbide Ceramic Monolithic Armor Panel

Applications of Boron Carbide Ceramic Monolithic Armor Panel

Lightweight Defense for Armed Force Vehicles

Boron carbide ceramic monolithic armor panels use solid defense with very reduced weight. These panels are typically utilized on armed forces vehicles like armored workers service providers and light tactical vehicles. Their light mass aids vehicles move quicker and make use of much less fuel without shedding protection. This makes them ideal for objectives that need speed and dexterity.

Personal Body Armor Solutions

These panels likewise serve in premium body shield for soldiers and unique pressures. Boron carbide is just one of the hardest materials recognized, so it stops bullets and shrapnel effectively. Since it is lighter than steel or other ceramics, wearers remain more comfy throughout long procedures. The panels fit into vests or plate carriers and offer reliable defense against rifle rounds.

Aircraft and Helicopter Armor

Weight matters a lot in air travel. Boron carbide panels safeguard important components of helicopters and fixed-wing aircraft from ground fire. Staff areas, fuel storage tanks, and avionics can all take advantage of this shield. Its strength-to-weight ratio ensures safety and security without harming trip performance or range.

Maritime Protection Solutions

Naval vessels make use of these panels to secure vital areas like command centers and weapon terminals. Deep sea and extreme sea conditions require durable materials. Boron carbide resists corrosion and maintains its protective top qualities in time. It helps ships remain mission-ready even in hard atmospheres.

Protection and Essential Framework

Beyond protection, these panels protect high-value sites such as power plants, information centers, and federal government buildings. They can be built right into walls, doors, or obstacles to stop break-in or ballistic dangers. Their reliability and lengthy service life make them a wise selection for irreversible security arrangements.


Company Profile

Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.


Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.


Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

B4C (17)
Boron Carbide Ceramic Monolithic Armor Panel

5 FAQs of Boron Carbide Ceramic Monolithic Armor Panel

Frequently Asked Questions About Boron Carbide Ceramic Monolithic Armor Panels

What is a boron carbide ceramic monolithic armor panel?

It is a single-piece armor plate made from boron carbide, one of the hardest materials known. This type of panel is used to stop high-velocity bullets and fragments. It offers strong protection while staying lighter than many other armor types.

Why choose boron carbide over other armor ceramics?

Boron carbide is much lighter than steel or alumina ceramic. It also has excellent hardness, which helps it break up incoming projectiles quickly. Because of this, it gives better protection per unit of weight—ideal for body armor and vehicle applications where every pound matters.

How durable are these panels in real-world use?

These panels hold up well under tough conditions. They resist wear, corrosion, and extreme temperatures. However, like all ceramics, they can crack if hit multiple times in the exact same spot. That’s why they are often backed with fiber composites to absorb leftover energy and prevent spalling.

Are boron carbide panels suitable for personal body armor?

Yes. Their light weight makes them a top choice for military and law enforcement vests. They help reduce fatigue during long missions. Still, they are usually part of a system that includes soft backing layers to manage blunt force trauma.

What maintenance do these panels require?

Very little. Just keep them clean and dry. Avoid dropping them on hard surfaces, as sharp impacts might cause hidden damage. Inspect them regularly for chips or cracks. If you see any damage, replace the panel right away—it may no longer offer full protection.

REQUEST A QUOTE

REQUEST A QUOTE