Industrial Custom High Purity Alumina Ceramic Spacer

PRODUCT PARAMETERS

Description
REQUEST A QUOTE

Description

Overview of Industrial Custom High Purity Alumina Ceramic Spacer

Alumina Ceramic, or Aluminum Oxide (Al₂O₃), is the most widely used and versatile advanced ceramic material. Known for its excellent balance of mechanical, thermal, and electrical properties, it is a cost-effective solution for a vast array of demanding industrial applications. Alumina components are produced in purity levels ranging from 85% to 99.9%, with properties enhancing as purity increases.

Features of Industrial Custom High Purity Alumina Ceramic Spacer

  • High Hardness & Wear Resistance: Offers exceptional resistance to abrasion and mechanical wear.
  • Excellent Electrical Insulation: Maintains high electrical resistivity even at elevated temperatures.
  • Good Thermal Conductivity: (For a ceramic) effectively dissipates heat, especially in higher purity grades.
  • High Compressive Strength: Capable of withstanding significant mechanical loads.
  • Chemical Inertness: Highly resistant to corrosion from acids, alkalis, and molten metals.
  • Cost-Effectiveness: Provides superior performance at a lower cost compared to many other technical ceramics.

Specifications of Industrial Custom High Purity Alumina Ceramic Spacer

Industrial Custom-made High Purity Alumina Ceramic Spacer

Material Structure

High pureness alumina (Al two O SIX) forms the core of this ceramic spacer. The product includes at the very least 99.5% alumina. This level of pureness ensures superb electric insulation and strong resistance to chemical deterioration. It also keeps architectural stability at heats.

Secret Physical Properties

The spacer reveals a density of 3.95– 3.98 g/cm TWO. Its solidity reaches up to 1700– 1900 HV on the Vickers range. Thermal conductivity kicks back 28– 32 W/m ·K. The coefficient of thermal growth is reduced, about 6.8– 7.2 × 10 ⁻⁶/ ° C from 20 ° C to 400 ° C. These traits make it secure under rapid temperature level adjustments and hefty mechanical tons.

Electric Performance

This spacer provides impressive electrical insulation, also in demanding settings. Volume resistivity surpasses 10 ¹⁴ Ω · centimeters at area temperature. Dielectric strength stands over 15 kV/mm. These worths remain consistent throughout a vast operating temperature range.

Dimensional Accuracy & Personalization

We produce each spacer to specific consumer specifications. Resistances can be held within ± 0.02 mm for important measurements. Forms include rings, tubes, obstructs, and complex geometries. Surface area surface options variety from conventional ground to fine-polished, depending upon application needs.

Running Conditions

The spacer carries out reliably from -200 ° C to +1600 ° C in air. It resists oxidation, acids, and antacid, making it appropriate for severe commercial settings. Usual uses consist of semiconductor handling tools, high-voltage insulators, aerospace parts, and research laboratory components.

Quality control

Every set undertakes strict quality control. Tests consist of dimensional checks, density confirmation, and electrical efficiency recognition. We follow ISO 9001 requirements throughout production to assure consistency and integrity.

Applications of Industrial Custom High Purity Alumina Ceramic Spacer

Applications of Industrial Custom High Purity Alumina Ceramic Spacer

Precision Parts for Demanding Atmospheres

High purity alumina ceramic spacers are built for hard commercial tasks. These components maintain crucial parts properly lined up and divided in high-heat, high-voltage, or corrosive settings. Their solid framework stands up to wear, thermal shock, and chemical assault– making them optimal where metals or plastics would certainly fall short.

Semiconductor Production
In chip manufacturing, tidiness and stability matter a lot of. Alumina spacers assist hold wafers and sensors in position inside vacuum chambers and etching devices. They do not outgas or pollute the procedure. Their electrical insulation also stops short circuits during fragile operations.

Medical and Lab Tools
Medical gadgets need materials that won’t respond with fluids or degrade under sanitation. Custom alumina spacers fit flawlessly in imaging devices, liquid handling systems, and analysis devices. They remain stable after duplicated autoclaving and resist staining or swelling.

Aerospace and Defense Systems
Airplane and defense electronic devices operate under extreme stress. Alumina spacers give reputable spacing in radar units, advice systems, and power components. They deal with wide temperature swings without broadening or fracturing. Their light-weight nature also helps reduce general system weight.

Energy and Power Electronics
In power converters, battery packs, and solar inverters, warmth accumulates quickly. Alumina spacers act as insulators between conductive components while pulling warm away. This dual function boosts safety and security and extends tools life. They function well also at voltages over 10 kV.

Each spacer is made to precise consumer specifications– dimension, opening pattern, surface area finish, and tolerance. This ensures smooth integration right into complicated settings up. Since they are machined from > 99.5% pure alumina, efficiency remains regular set after set. Engineers pick them when failure is not an option.


Company Profile

Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.


Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.


Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

5 FAQs of Industrial Custom High Purity Alumina Ceramic Spacer

Frequently Asked Questions: Industrial Custom High Purity Alumina Ceramic Spacer

What is a high purity alumina ceramic spacer?

It is a precision-made component made from alumina (Al₂O₃) with purity levels of 99.5% or higher. These spacers are used to maintain exact gaps or alignment between parts in demanding industrial environments.

Why choose high purity alumina over other materials?

High purity alumina offers excellent electrical insulation, strong mechanical strength, and resistance to heat and corrosion. It stays stable under high temperatures and harsh chemicals where metals or plastics would fail.

Can these spacers be customized?

Yes. We make spacers to your exact size, shape, and tolerance needs. Whether you need simple washers or complex geometries, we can produce them using advanced forming and machining methods.

Where are these spacers commonly used?

They are widely used in semiconductor manufacturing, aerospace systems, medical devices, and high-voltage equipment. Any application that needs reliable performance in extreme conditions may benefit from these spacers.

How do you ensure quality and consistency?

Every batch goes through strict quality control. We test for dimensional accuracy, material purity, density, and mechanical properties. Our production follows ISO standards to guarantee consistent results for every order.

REQUEST A QUOTE

REQUEST A QUOTE