Next-Generation Ceramics: Unlocking Superior Properties for Industry
PRODUCT PARAMETERS
Description
Overview of High Purity, Thin Alumina (Al2O3) Ceramic Substrate Sheet
Alumina Ceramic, or Aluminum Oxide (Al₂O₃), is the most widely used and versatile advanced ceramic material. Known for its excellent balance of mechanical, thermal, and electrical properties, it is a cost-effective solution for a vast array of demanding industrial applications. Alumina components are produced in purity levels ranging from 85% to 99.9%, with properties enhancing as purity increases.
Features of High Purity, Thin Alumina (Al2O3) Ceramic Substrate Sheet
- High Hardness & Wear Resistance: Offers exceptional resistance to abrasion and mechanical wear.
- Excellent Electrical Insulation: Maintains high electrical resistivity even at elevated temperatures.
- Good Thermal Conductivity: (For a ceramic) effectively dissipates heat, especially in higher purity grades.
- High Compressive Strength: Capable of withstanding significant mechanical loads.
- Chemical Inertness: Highly resistant to corrosion from acids, alkalis, and molten metals.
- Cost-Effectiveness: Provides superior performance at a lower cost compared to many other technical ceramics.

Specifications of High Purity, Thin Alumina (Al2O3) Ceramic Substrate Sheet
High Pureness, Thin Alumina (Al Two O ₃) Ceramic Substratum Sheet
Product Composition
This substratum sheet is made from 99.6% pure alumina (Al two O FOUR). It has very low levels of impurities such as salt, silica, and iron. The high purity makes certain outstanding electric insulation and thermal stability.
Physical Measurements
Thickness ranges from 0.1 mm to 1.0 mm. Typical sheet dimensions include 100 mm × 100 mm, 150 mm × 150 mm, and personalized dimensions upon demand. Resistances are tightly controlled: ± 0.02 mm for density and ± 0.1 mm for size and width.
Mechanical Residences
The product has a flexural strength of 380– 420 MPa. Its hardness actions between 1500– 1700 HV on the Vickers range. These homes make it immune to fracturing and wear during handling and usage.
Thermal Characteristics
It can operate continuously at temperatures as much as 1600 ° C in air. The coefficient of thermal development is 6.8 × 10 ⁻⁶/ ° C (from 25 ° C to 800 ° C). Thermal conductivity is about 28– 32 W/m · K, enabling reliable warmth dissipation.
Electric Performance
Quantity resistivity exceeds 10 ¹⁴ Ω · cm at room temperature level. Dielectric toughness is above 15 kV/mm. The dielectric constant is around 9.8 at 1 MHz, with a loss tangent below 0.0002. These characteristics support stable performance in high-frequency and high-voltage applications.
Surface Quality
Both sides are mirror-polished to a surface roughness of Ra ≤ 0.1 µm. This smooth coating improves bonding integrity for thin-film deposition and decreases signal loss in digital circuits.
Applications
Typical usages consist of semiconductor packaging, sensors, laser components, and RF/microwave devices. The combination of purity, flatness, and thermal monitoring makes it excellent for demanding industrial and clinical atmospheres.

Applications of High Purity, Thin Alumina (Al2O3) Ceramic Substrate Sheet
Applications of High Pureness, Thin Alumina (Al ₂ O FOUR) Ceramic Substratum Sheets
Electronics and Semiconductors
High pureness, thin alumina ceramic sheets are widely utilized in electronics. Their superb electrical insulation keeps circuits safe and steady. These substrates take care of high temperatures without buckling or damaging. That makes them excellent for power modules, hybrid circuits, and chip packaging. They also sustain fine-line printing, which is needed for contemporary miniaturized gadgets.
Sensors and Measurement Instruments
Slim alumina sheets function well in sensing units due to the fact that they withstand corrosion and remain strong under tension. They offer a stable base for sensitive parts like pressure sensors, gas detectors, and thermal probes. The product’s reduced thermal expansion ensures readings remain exact even when temperature levels alter swiftly.
Medical and Research Laboratory Devices
In clinical devices and lab tools, sanitation and reliability issue most. Alumina’s biocompatibility suggests it will not react with body tissues or chemicals. It can be sanitized repetitively without damages. This makes it suitable for analysis tools, microfluidic chips, and implantable electronics.
Aerospace and Defense Solutions
Aerospace applications demand products that perform under severe conditions. Thin alumina substratums meet this need. They endure high vibration, wide temperature swings, and radiation direct exposure. Designers utilize them in radar systems, satellite elements, and avionics where failure is not a choice.
Optoelectronics and LED Technology
For LEDs and optical tools, heat management is crucial. Alumina draws heat away from light-emitting components while remaining electrically neutral. Its smooth surface allows exact placing of tiny optical elements. This helps prolong device life and preserve brightness gradually.
These substrate sheets incorporate stamina, pureness, and thermal control in one thin form. Designers choose them when efficiency, safety and security, and dimension all issue. Their versatility remains to drive advancement across lots of modern fields.
Company Profile
Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.
Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.

Payment Methods
T/T, Western Union, Paypal, Credit Card etc.
Shipment Methods
By air, by sea, by express, as customers request.

5 FAQs of High Purity, Thin Alumina (Al2O3) Ceramic Substrate Sheet
Frequently Asked Questions About High Purity, Thin Alumina Ceramic Substrate Sheets
What is high purity thin alumina ceramic?
It is a flat sheet made from aluminum oxide (Al₂O₃) with very few impurities—usually 99.5% pure or higher. The material is strong, stable at high temperatures, and electrically insulating. It comes in thin formats, often under 1 mm thick.
Why choose high purity over standard alumina?
High purity alumina offers better electrical insulation, thermal conductivity, and resistance to chemical corrosion. These properties matter in sensitive electronics, sensors, and semiconductor applications where performance and reliability are critical.
What thicknesses are available?
Standard thin sheets range from 0.25 mm to 1.0 mm. Custom thicknesses can be produced based on project needs. Thinner sheets allow for compact designs without sacrificing mechanical strength or thermal performance.
Can these substrates handle high temperatures?
Yes. They remain stable up to 1600°C in air. Their low thermal expansion also helps prevent cracking during rapid heating or cooling cycles. This makes them ideal for use in harsh thermal environments like furnaces or aerospace components.
Are they compatible with standard manufacturing processes?
These substrates work well with common fabrication methods such as laser cutting, dicing, screen printing, and thin-film deposition. Their smooth surface and tight dimensional tolerances support precision assembly and integration into electronic modules.
REQUEST A QUOTE
RELATED PRODUCTS
High Mechanical Strength Al2O3 Grinding Ceramic
Alumina Ceramic Insulating Beads for Thermocouples
Excellent Electrical Insulation Alumina Ceramic Substrate Plate
Industrial High Alumina Ceramic Sheet
Alumina Ceramic Refractory Shaft for Pumps


