Next-Generation Ceramics: Unlocking Superior Properties for Industry
PRODUCT PARAMETERS
Description
Overview of Ultra-Smooth, Low Friction Precision Ground Alumina Ceramic Substrate
Alumina Ceramic, or Aluminum Oxide (Al₂O₃), is the most widely used and versatile advanced ceramic material. Known for its excellent balance of mechanical, thermal, and electrical properties, it is a cost-effective solution for a vast array of demanding industrial applications. Alumina components are produced in purity levels ranging from 85% to 99.9%, with properties enhancing as purity increases.
Features of Ultra-Smooth, Low Friction Precision Ground Alumina Ceramic Substrate
- High Hardness & Wear Resistance: Offers exceptional resistance to abrasion and mechanical wear.
- Excellent Electrical Insulation: Maintains high electrical resistivity even at elevated temperatures.
- Good Thermal Conductivity: (For a ceramic) effectively dissipates heat, especially in higher purity grades.
- High Compressive Strength: Capable of withstanding significant mechanical loads.
- Chemical Inertness: Highly resistant to corrosion from acids, alkalis, and molten metals.
- Cost-Effectiveness: Provides superior performance at a lower cost compared to many other technical ceramics.

Specifications of Ultra-Smooth, Low Friction Precision Ground Alumina Ceramic Substrate
Ultra-Smooth, Low Rubbing Precision Ground Alumina Ceramic Substrate
Surface End Up and Flatness
This alumina ceramic substratum includes an ultra-smooth surface. The average roughness (Ra) is listed below 0.1 micrometers. Surface area monotony remains within ± 1 micron over a 25 mm period. This level of level of smoothness lowers rubbing in relocating components and makes sure dependable contact in delicate applications.
Material Make-up
The base material is high-purity alumina (Al two O TWO), with a minimal purity of 96%. It supplies excellent mechanical strength, electrical insulation, and thermal security. The fine-grained microstructure sustains regular performance under requiring problems.
Dimensional Precision
All substratums are accuracy ground to limited tolerances. Density resistance is held to ± 0.025 mm. Size and width measurements remain within ± 0.05 mm. These tight controls make sure smooth combination right into accuracy assemblies without extra machining.
Mechanical Properties
Firmness: 1500– 1700 HV
Flexural Stamina: ≥ 350 MPa
Compressive Stamina: ≥ 2000 MPa
These values make the substrate highly immune to wear, chipping, and deformation– also under repeated tension or high loads.
Thermal and Electrical Efficiency
Thermal Conductivity: 24– 30 W/m · K. Dielectric Stamina: > 15 kV/mm.
Quantity Resistivity: > 10 ¹⁴ Ω · cm.
The product preserves stable performance from -50 ° C to +1000 ° C. It shields well and dissipates heat efficiently, which is important for electronic devices and high-temperature atmospheres.
Applications
This substrate suits use in semiconductor handling tools, optical mounts, wear-resistant guides, sensor platforms, and vacuum cleaner feedthroughs. Its low rubbing and high dimensional stability support lengthy service life and marginal upkeep in accuracy systems.

Applications of Ultra-Smooth, Low Friction Precision Ground Alumina Ceramic Substrate
Applications of Ultra-Smooth, Low Friction Precision Ground Alumina Ceramic Substrate
High-Performance Electronic devices
Precision ground alumina ceramic substratums are widely utilized in sophisticated digital systems. Their ultra-smooth surface area ensures dependable electrical links. These substratums manage high voltages and withstand thermal stress. They work well in power components, RF gadgets, and semiconductor packaging. The low friction surface likewise decreases wear throughout setting up and handling.
Sensors and Measurement Equipment
In delicate instruments, surface area quality matters a whole lot. The smooth surface of these alumina porcelains minimizes signal noise and interference. This makes them suitable for stress sensors, accelerometers, and optical detectors. Their security throughout temperature modifications maintains dimensions exact in time.
Medical Devices
Medical devices demands tidy, inert, and long lasting materials. Precision ground alumina meets these requirements. It is utilized in medical tools, analysis imaging parts, and implantable tool real estates. The low-friction surface helps parts relocate smoothly without generating bits. This supports both performance and individual safety and security.
Aerospace and Protection Equipments
Rough settings ask for durable products. Alumina ceramic substratums take on extreme warmth, resonance, and radiation. They offer in radar systems, assistance electronic devices, and satellite interaction equipment. Their dimensional security ensures constant procedure under stress.
Industrial Automation
Equipments that run continuously demand components that last. These ceramic substrates provide long life span with minimal upkeep. They appear in encoder disks, linear movement guides, and accuracy spacers. The reduced coefficient of rubbing minimize power loss and part destruction.
Makers choose ultra-smooth, reduced friction precision ground alumina ceramic substratums when dependability, tidiness, and efficiency are important. Their one-of-a-kind blend of mechanical toughness, electric insulation, and surface area perfection sustains requiring applications throughout several sectors.
Company Profile
Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.
Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.

Payment Methods
T/T, Western Union, Paypal, Credit Card etc.
Shipment Methods
By air, by sea, by express, as customers request.

5 FAQs of Ultra-Smooth, Low Friction Precision Ground Alumina Ceramic Substrate
What is this ceramic substrate made of?
This substrate is made from high-purity alumina. The material is precision ground to create an ultra-smooth surface. It offers excellent mechanical strength and thermal stability.
Why choose a low-friction surface?
A low-friction surface reduces wear and improves performance in moving parts. It also helps parts slide easily without sticking. This is important in sensitive applications like sensors or semiconductor tools.
How smooth is the surface?
The surface finish is extremely fine—typically under 0.1 micrometers Ra. This level of smoothness ensures minimal contact resistance and consistent behavior in tight-tolerance systems.
Is it suitable for high-temperature environments?
Yes. Alumina ceramic handles high temperatures very well. It stays stable even above 1,500°C. This makes it reliable for use in furnaces, aerospace parts, and other hot settings.
Can it be used in electrical applications?
Absolutely. This substrate is an excellent electrical insulator. It blocks current flow while supporting precise component placement. That’s why it’s often used in circuit boards, power modules, and electronic packaging.
REQUEST A QUOTE
RELATED PRODUCTS
High Purity, Small Diameter Alumina Ceramic Tube
Round 96%/99.6% Alumina (Al2O3) Ceramic Substrate Wafer
High Purity 95%/99%/99.5% Al2O3 Alumina Ceramic
Near-Spherical High Thermal Conductivity Alumina Powder (99.8%)
100mm/125mm Grinder Discs: Zirconia/Alumina/SiC Fiber/Paper

