Next-Generation Ceramics: Unlocking Superior Properties for Industry
PRODUCT PARAMETERS
Description
Overview of 96% Alumina (Al2O3) High Purity Ceramic Substrate Plate
Alumina Ceramic, or Aluminum Oxide (Al₂O₃), is the most widely used and versatile advanced ceramic material. Known for its excellent balance of mechanical, thermal, and electrical properties, it is a cost-effective solution for a vast array of demanding industrial applications. Alumina components are produced in purity levels ranging from 85% to 99.9%, with properties enhancing as purity increases.
Features of 96% Alumina (Al2O3) High Purity Ceramic Substrate Plate
- High Hardness & Wear Resistance: Offers exceptional resistance to abrasion and mechanical wear.
- Excellent Electrical Insulation: Maintains high electrical resistivity even at elevated temperatures.
- Good Thermal Conductivity: (For a ceramic) effectively dissipates heat, especially in higher purity grades.
- High Compressive Strength: Capable of withstanding significant mechanical loads.
- Chemical Inertness: Highly resistant to corrosion from acids, alkalis, and molten metals.
- Cost-Effectiveness: Provides superior performance at a lower cost compared to many other technical ceramics.

Specifications of 96% Alumina (Al2O3) High Purity Ceramic Substrate Plate
96% Alumina High Pureness Porcelain Substrate Plate– Secret Specifications
Material Structure
This substratum plate is made from 96% pure alumina (Al ₂ O ₃). The remaining 4% contains meticulously managed additives that assist boost mechanical strength and sintering performance. No unneeded fillers or impurities are utilized.
Physical Qualities
The plate has a density of about 3.7 g/cm FOUR, which makes certain strong architectural honesty. Its flexural toughness arrays from 300 to 350 MPa, making it resistant to flexing and breakage under typical operating problems. The hardness is around 1500– 1600 HV on the Vickers range, offering excellent wear resistance.
Thermal Efficiency
It can take care of constant usage at temperatures as much as 1600 °C. The coefficient of thermal expansion is approximately 7.2 × 10 ⁻⁶/ ° C (from 25 ° C to 800 ° C). This reduced development price aids keep dimensional security during home heating and cooling down cycles. Thermal conductivity sits at 24– 28 W/m ·K, permitting effective warm dissipation.
Electrical Qualities
The material offers high electrical insulation, also at elevated temperature levels. Its dielectric strength exceeds 12 kV/mm. Volume resistivity is greater than 10 ¹⁴ Ω · centimeters at space temperature level, guaranteeing trustworthy performance popular digital applications.
Surface and Dimensional Particulars
Requirement surface area finish is smooth, with common roughness worths listed below 0.5 µm Ra. Plates are available in different densities– usual alternatives consist of 0.25 mm, 0.5 mm, 0.635 mm, and 1.0 mm. Resistances are held tightly: thickness ± 0.02 mm, length/width ± 0.1 mm. Customized shapes and sizes can also be generated upon demand.
Applications
These substratums are widely made use of in power electronic devices, sensors, crossbreed circuits, LED product packaging, and high-temperature insulators. Their mix of pureness, toughness, and thermal stability makes them suitable for environments where integrity is crucial.

Applications of 96% Alumina (Al2O3) High Purity Ceramic Substrate Plate
Applications of 96% Alumina (Al ₂ O SIX) High Purity Ceramic Substrate Plate
Electronic Devices and Semiconductor Industry
96% alumina ceramic substrate plates are widely made use of in electronic devices. They supply solid electric insulation and good thermal conductivity. These properties make them suitable for hybrid incorporated circuits, chip resistors, and power components. Their security at high temperatures ensures trustworthy efficiency popular settings.
Sensing Units and Dimension Tools
These substratums work well in sensor applications. They support components that discover pressure, temperature level, or gas levels. The material stands up to chemical corrosion and keeps precision over time. This makes it ideal for industrial sensing units and automobile tracking systems.
LED and Optoelectronic Product Packaging
In LED lights, 96% alumina substrates aid manage warmth from high-power chips. Reliable warm dissipation prolongs the life of LEDs and keeps light outcome stable. The white surface likewise improves light reflection, enhancing overall performance.
Vacuum Cleaner and High-Frequency Equipment
The low dielectric loss of alumina porcelains supports high-frequency signal transmission. Engineers use these plates in radar systems, microwave devices, and vacuum cleaner feedthroughs. Their mechanical toughness and vacuum compatibility ensure secure, long-term procedure.
Medical and Analytical Instruments
Clinical gadgets often call for products that are both inert and sturdy. 96% alumina ceramic plates meet these requirements. They appear in analysis tools, lab-on-a-chip systems, and imaging equipment where sanitation and precision matter.
Industrial and Power Solutions
Durable applications like power converters and electrical vehicle components count on these substrates. They manage high voltages and rough conditions without deteriorating. Their integrity lowers upkeep prices and system downtime.
Company Profile
Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.
Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.

Payment Methods
T/T, Western Union, Paypal, Credit Card etc.
Shipment Methods
By air, by sea, by express, as customers request.

5 FAQs of 96% Alumina (Al2O3) High Purity Ceramic Substrate Plate
Frequently Asked Questions About 96% Alumina Ceramic Substrate Plates
What is a 96% alumina ceramic substrate plate?
This plate is made mostly of aluminum oxide (Al₂O₃), with 96% purity. It is a strong, heat-resistant material used in electronics, sensors, and industrial parts. The remaining 4% includes additives that help it form a dense, stable structure during manufacturing.
Why choose 96% alumina over other ceramics?
96% alumina offers a good balance of performance and cost. It has high mechanical strength, excellent electrical insulation, and can handle temperatures up to 1600°C. It is more affordable than higher-purity alumina (like 99.5%) while still meeting most industrial needs.
Where are these plates commonly used?
These substrates are widely used in power electronics, LED lighting, automotive sensors, and semiconductor equipment. Their thermal stability and electrical insulation make them ideal for mounting circuits or acting as insulating layers in harsh environments.
Can the plates be customized in size or shape?
Yes. Standard sizes are available, but custom dimensions, thicknesses, and shapes can be produced. Precision grinding and laser cutting allow tight tolerances and complex geometries to meet specific application requirements.
How do I handle and install these ceramic plates?
Handle with care—they are hard but brittle. Avoid sudden impacts or bending forces. Clean surfaces with isopropyl alcohol before bonding or mounting. Use compatible adhesives or brazing materials designed for high-temperature ceramics to ensure strong, reliable attachment.
REQUEST A QUOTE
RELATED PRODUCTS
99% High Alumina Ceramic Ball for Catalyst Support
Customized Alumina Microspheres for High-End Applications
Chemical Grade Activated Alumina (Aluminum Oxide) Ceramic
High Al2O3 Content Alumina Ceramic Parts
Zirconia Ceramic Basket Gemstone with Alumina Coating

