95% Alumina Ceramic Insulating Block with Holes

PRODUCT PARAMETERS

Description
REQUEST A QUOTE

Description

Overview of 95% Alumina Ceramic Insulating Block with Holes

Alumina Ceramic, or Aluminum Oxide (Al₂O₃), is the most widely used and versatile advanced ceramic material. Known for its excellent balance of mechanical, thermal, and electrical properties, it is a cost-effective solution for a vast array of demanding industrial applications. Alumina components are produced in purity levels ranging from 85% to 99.9%, with properties enhancing as purity increases.

Features of 95% Alumina Ceramic Insulating Block with Holes

  • High Hardness & Wear Resistance: Offers exceptional resistance to abrasion and mechanical wear.
  • Excellent Electrical Insulation: Maintains high electrical resistivity even at elevated temperatures.
  • Good Thermal Conductivity: (For a ceramic) effectively dissipates heat, especially in higher purity grades.
  • High Compressive Strength: Capable of withstanding significant mechanical loads.
  • Chemical Inertness: Highly resistant to corrosion from acids, alkalis, and molten metals.
  • Cost-Effectiveness: Provides superior performance at a lower cost compared to many other technical ceramics.
ceramic crucible (15)
95% Alumina Ceramic Insulating Block with Holes

Specifications of 95% Alumina Ceramic Insulating Block with Holes

95% Alumina Ceramic Insulating Block with Holes– Technical Specifications

Material Composition

This protecting block is made from 95% high-purity alumina ceramic . The staying 5% consists of additives that boost mechanical toughness and thermal stability. The product supplies outstanding electric insulation, also at high temperatures.

Physical Features

The block has a thickness of 3.6– 3.7 g/cm ³ and a hardness of 1500– 1700 HV on the Vickers scale. Its flexural strength ranges from 300 to 350 MPa , while compressive stamina goes beyond 2000 MPa . These values make certain dependable efficiency under mechanical stress.

Thermal Efficiency

It can run continually at temperatures approximately 1600 ° C(2912 ° F) in oxidizing ambiences. The thermal conductivity is about 28– 30 W/m · K at area temperature level. Its coefficient of thermal development is 6.5– 7.5 × 10 ⁻⁶/ ° C (from 20 ° C to 1000 ° C), which helps reduce breaking during rapid home heating or cooling cycles.

Electrical Characteristics

At space temperature level, the volume resistivity is more than 10 ¹⁴ Ω · cm . The dielectric strength stands at 10– 15 kV/mm , making it ideal for high-voltage insulation applications. Loss tangent remains reduced, commonly below 0.0005 at 1 MHz .

Design Features

Each block includes precision-drilled holes tailored to your placing or assembly needs. Opening sizes, depths, and spacing can be customized. Standard tolerances for dimensions are ± 0.1 mm , and for hole placements, ± 0.05 mm .

Surface Area Finish and Dimensions

Requirement surface area roughness is Ra ≤ 1.6 µm , however finer finishes are available on request. Blocks are supplied in a range of dimensions– common thicknesses include 5 mm, 10 mm, and 20 mm , with custom sizes and widths also feasible.

Applications

These blocks are extensively used in high-temperature heaters, semiconductor manufacturing tools, plasma systems, and power electronic devices where strong insulation and structural integrity are important.

ceramic crucible (5)
95% Alumina Ceramic Insulating Block with Holes

Applications of 95% Alumina Ceramic Insulating Block with Holes

Applications of 95% Alumina Porcelain Insulating Block with Holes

High-Temperature Electrical Insulation

95% alumina ceramic insulating blocks with holes are commonly used where solid electrical insulation is required at high temperatures. These blocks keep electrical power from moving where it must not. They function well in heating systems, heating elements, and industrial stoves. The product remains secure even when warmed over 1,500 ° C.

Mechanical Assistance in Severe Atmospheres

The openings in these blocks enable easy placing or threading of rods, cables, or sensing units. This makes them suitable for holding components in position inside aggressive chemical or thermal setups. Their high hardness and reduced wear rate mean they last a long time without deforming or breaking.

Vacuum Cleaner and Semiconductor Devices

In vacuum cleaner chambers and semiconductor production tools, cleanliness and security matter a lot. These ceramic blocks do not release gases when heated up, so they will not contaminate delicate procedures. Their specific opening patterns help align elements accurately while blocking stray currents.

Sensor and Probe Installing

Several temperature level or pressure sensors have to operate in warm or harsh locations. The insulating block holds the sensing unit safely while keeping it electrically isolated. The pre-drilled openings simplify installment and reduce assembly time.

Customized Industrial Fixtures

Due to the fact that 95% alumina can be machined to limited tolerances, engineers often utilize these blocks as bases or spacers in customized jigs and components. The openings sustain bolts, pins, or cooling lines. Also under consistent stress and anxiety or warmth biking, the blocks keep their form and feature.

These blocks integrate excellent dielectric toughness, thermal resistance, and mechanical sturdiness. That is why they are relied on across power generation, metallurgy, aerospace, and electronic devices industries.


Company Profile

Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.


Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.


Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

B4C (40)
95% Alumina Ceramic Insulating Block with Holes

5 FAQs of 95% Alumina Ceramic Insulating Block with Holes

Frequently Asked Questions About 95% Alumina Ceramic Insulating Blocks with Holes

What is a 95% alumina ceramic insulating block?

This block is made mostly of aluminum oxide (95% pure). It has small holes drilled through it. The material handles high heat well and does not conduct electricity. People use it in places where strong insulation and heat resistance are needed.

Why choose 95% alumina over other ceramics?

95% alumina offers a good balance of strength, thermal stability, and electrical insulation. It works better than lower-grade ceramics at high temperatures. It also lasts longer under heavy use or harsh conditions.

What are the holes for?

The holes let you mount the block easily using bolts or pins. They also help with airflow or cooling in some setups. You can route wires or sensors through them if your design needs it.

Where are these blocks commonly used?

You will find them in industrial furnaces, heating elements, semiconductor equipment, and power electronics. Any place that needs reliable insulation at high temperatures may use this type of block.

Can these blocks handle sudden temperature changes?

Yes, but with limits. 95% alumina resists thermal shock better than many materials. Still, very fast or extreme temperature swings can cause cracks. It’s best to heat and cool the block slowly when possible.

REQUEST A QUOTE

REQUEST A QUOTE