Next-Generation Ceramics: Unlocking Superior Properties for Industry
PRODUCT PARAMETERS
Description
Overview of Surface Metalized Alumina (Al2O3) Ceramic Substrate Plate
Alumina Ceramic, or Aluminum Oxide (Al₂O₃), is the most widely used and versatile advanced ceramic material. Known for its excellent balance of mechanical, thermal, and electrical properties, it is a cost-effective solution for a vast array of demanding industrial applications. Alumina components are produced in purity levels ranging from 85% to 99.9%, with properties enhancing as purity increases.
Features of Surface Metalized Alumina (Al2O3) Ceramic Substrate Plate
- High Hardness & Wear Resistance: Offers exceptional resistance to abrasion and mechanical wear.
- Excellent Electrical Insulation: Maintains high electrical resistivity even at elevated temperatures.
- Good Thermal Conductivity: (For a ceramic) effectively dissipates heat, especially in higher purity grades.
- High Compressive Strength: Capable of withstanding significant mechanical loads.
- Chemical Inertness: Highly resistant to corrosion from acids, alkalis, and molten metals.
- Cost-Effectiveness: Provides superior performance at a lower cost compared to many other technical ceramics.

Specifications of Surface Metalized Alumina (Al2O3) Ceramic Substrate Plate
Surface Area Metalized Alumina (Al Two O FIVE) Ceramic Substrate Plate– Key Specs
Product Make-up
The base material is high-purity alumina ceramic (Al two O ₃), with pureness degrees typically at 96% or 99.6%. This guarantees solid mechanical support, excellent electrical insulation, and secure performance under heats.
Metalization Layer
Thick-film metalization is applied to one or both sides of the substrate utilizing display printing and high-temperature firing. Common metals consist of tungsten-manganese (W-Mn), molybdenum-manganese (Mo-Mn), or silver-based pastes. The steel layer supplies reputable electrical conductivity and solid attachment for succeeding plating or component add-on.
Measurements and Tolerances
Criterion thickness varies from 0.25 mm to 1.0 mm. Customized dimensions are readily available, with common sheet measurements up to 100 mm × 100 mm. Thickness resistance remains within ± 0.03 mm. Size and size resistances are typically ± 0.1 mm, ensuring precise suit tight assemblies.
Surface area Complete
The metalized surface area is smooth and uniform, with a roughness (Ra) below 1.0 µm. This surface sustains fine-line circuit patterning and protected bonding with solder or epoxy.
Electrical Qualities
Volume resistivity exceeds 10 ¹⁴ Ω · centimeters. Dielectric stamina is more than 15 kV/mm. These buildings make the substratum suitable for high-voltage and high-frequency applications.
Thermal Performance
The substrate deals with constant operating temperatures as much as 1000 ° C in air. Thermal conductivity varieties from 24 to 30 W/m · K(for 96% Al ₂ O FIVE) and approximately 35 W/m · K (for 99.6% Al Two O FOUR), making it possible for reliable heat dissipation.
Mechanical Toughness
Flexural strength is usually above 300 MPa. The material resists fracturing throughout handling, assembly, and thermal cycling.
Compatibility
The metalized surface area works well with gold, nickel, or tin plating processes. It also bonds accurately with common die-attach materials and wire-bonding techniques utilized in crossbreed circuits and power components.

Applications of Surface Metalized Alumina (Al2O3) Ceramic Substrate Plate
Applications of Surface Area Metalized Alumina (Al Two O FIVE) Ceramic Substratum Plates
Power Electronic Devices and High-Voltage Solutions
Surface area metalized alumina ceramic substratum plates are widely used in power electronic devices. Their strong electrical insulation and high thermal conductivity make them excellent for dealing with high voltages and large currents. These plates support components like IGBT modules, power resistors, and inverters. They aid relocate warmth away from sensitive parts while keeping circuits electrically isolated.
Automotive and Transportation Electronic Devices
In modern-day automobiles, these substratums show up in engine control devices, battery administration systems, and electrical motor drives. They take on severe problems– high temperatures, resonance, and moisture– without losing performance. This reliability is key for safety-critical automobile applications.
Industrial Devices and Sensors
Durable industrial devices often depend on metalized alumina substratums for sensing unit real estates and control boards. The product resists wear, rust, and thermal shock. It also provides a steady base for thin-film or thick-film circuits made use of in pressure, temperature, and gas sensors.
LED Lights and Optoelectronics
High-power LED components make use of these ceramic plates as warmth spreaders. Effective warmth dissipation keeps LEDs bright and long-lasting. The smooth, metalized surface permits direct installing of chips or reflectors, streamlining assembly and improving light outcome.
Aerospace and Protection Systems
For radar, communication equipment, and avionics, security under extreme anxiety issues. Alumina substrates supply consistent performance throughout large temperature ranges. Their low signal loss and mechanical strength assistance small, sturdy designs needed in aerospace environments.
Medical Gadgets
Accuracy medical devices– such as imaging systems and medical tools– make use of these substratums for their biocompatibility and electric safety. The ceramic body does not respond with body cells or cleansing representatives, making it ideal for multiple-use and implantable devices.
Company Profile
Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.
Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.

Payment Methods
T/T, Western Union, Paypal, Credit Card etc.
Shipment Methods
By air, by sea, by express, as customers request.

5 FAQs of Surface Metalized Alumina (Al2O3) Ceramic Substrate Plate
Frequently Asked Questions About Surface Metalized Alumina Ceramic Substrate Plates
What is a surface metalized alumina ceramic substrate plate?
It is a high-performance ceramic plate made from aluminum oxide (Al₂O₃). One or both sides are coated with a thin layer of metal—usually copper, silver, or gold. This metal layer allows the plate to conduct electricity while keeping the strong insulating and heat-resistant properties of the ceramic base.
Why use alumina instead of other ceramics?
Alumina offers excellent electrical insulation, good thermal conductivity, and high mechanical strength. It stays stable at high temperatures and resists wear and corrosion. These features make it ideal for demanding applications like power electronics and sensors.
How is the metal layer applied?
The metal is bonded to the ceramic using processes like thick-film printing, thin-film deposition, or direct bonding. Each method gives different thicknesses and adhesion levels. The choice depends on your needs for current capacity, precision, and operating environment.
Can these plates handle high power or high frequency?
Yes. Thanks to their low dielectric loss and stable performance across a wide temperature range, metalized alumina substrates work well in high-power and high-frequency circuits. They help manage heat and maintain signal integrity in compact designs.
Are custom sizes and metal patterns available?
Yes. Most manufacturers offer customization. You can specify plate dimensions, metal type, layer thickness, and circuit patterns. This flexibility supports unique design requirements in industries like automotive, aerospace, and medical devices.
REQUEST A QUOTE
RELATED PRODUCTS
The Key to Superior Ceramic Quality: Alumina Microspheres
92% Al2O3 Ceramic Lining Bricks for Ball Mill Protection
99.5% Fine Calcined Alumina Powder for LED PCB (Dielectric) (CAS 1344-28-1)
Custom High Temperature 99%/99.7% Alumina Ceramic Tube for Furnaces – China Factory
Gravel’s Alumina & Zirconia Ceramic Basket Gemstone


