Next-Generation Ceramics: Unlocking Superior Properties for Industry
PRODUCT PARAMETERS
Description
Overview of 92% Alumina Ceramic Mining Square Mosaic Tile – 17.5×17.5x5mm
Alumina Ceramic, or Aluminum Oxide (Al₂O₃), is the most widely used and versatile advanced ceramic material. Known for its excellent balance of mechanical, thermal, and electrical properties, it is a cost-effective solution for a vast array of demanding industrial applications. Alumina components are produced in purity levels ranging from 85% to 99.9%, with properties enhancing as purity increases.
Features of 92% Alumina Ceramic Mining Square Mosaic Tile – 17.5×17.5x5mm
- High Hardness & Wear Resistance: Offers exceptional resistance to abrasion and mechanical wear.
- Excellent Electrical Insulation: Maintains high electrical resistivity even at elevated temperatures.
- Good Thermal Conductivity: (For a ceramic) effectively dissipates heat, especially in higher purity grades.
- High Compressive Strength: Capable of withstanding significant mechanical loads.
- Chemical Inertness: Highly resistant to corrosion from acids, alkalis, and molten metals.
- Cost-Effectiveness: Provides superior performance at a lower cost compared to many other technical ceramics.

Specifications of 92% Alumina Ceramic Mining Square Mosaic Tile – 17.5×17.5x5mm
92% Alumina Porcelain Mining Square Mosaic Floor tile– 17.5 x17.5 x5mm
Material and Structure
This mosaic tile is made from 92% high-purity alumina ceramic . The material offers the ceramic tile strong firmness and exceptional wear resistance. It additionally handles impact well. These residential or commercial properties make it excellent for difficult mining atmospheres where abrasion is a consistent issue.
Dimensions and Style
Each ceramic tile measures 17.5 mm in size, 17.5 mm in width, and 5mm in thickness . The square form permits limited, seamless setup. This produces a smooth surface that minimizes material accumulation and eases cleaning. The uniform dimension ensures constant insurance coverage across big or complex surface areas.
Efficiency Features
The tile provides high compressive strength and preserves architectural honesty under hefty lots. It withstands rust from chemicals and dampness, which prevail in mining procedures. Its dense microstructure stops penetration by fluids or fine fragments. This keeps tools protected over lengthy solution periods.
Setup and Utilize
These tiles are typically bound to chutes, receptacles, pipelines, and various other wear-prone components utilizing industrial adhesives or mechanical bolts. Their small size allows them conform to rounded or irregular surfaces. This versatility makes them ideal for lots of types of mining machinery and handling systems.
Toughness and Upkeep
Many thanks to its alumina material, the tile remains secure at heats and does not deteriorate conveniently. It needs little maintenance as soon as installed. Customers report considerably longer equipment life and less closures for fixings. This leads to reduced operating costs and better productivity in mineral handling applications.

Applications of 92% Alumina Ceramic Mining Square Mosaic Tile – 17.5×17.5x5mm
Applications of 92% Alumina Ceramic Mining Square Mosaic Ceramic tile– 17.5 x17.5 x5mm
Extreme Use Defense in Mining Environments
Mining operations demand materials that can deal with constant abrasion, influence, and severe problems. The 92% alumina ceramic mining square mosaic ceramic tile (17.5 x17.5 x5mm) is developed for this exact objective. Its high alumina web content offers it remarkable solidity– 2nd just to ruby among industrial materials. This makes it excellent for lining surface areas that deal with heavy wear daily.
These tiles are commonly utilized to secure chutes, receptacles, cyclones, and conveyor systems. They stop steel parts from putting on down as well quick. Tools lasts longer. Maintenance expenses decline. Downtime shrinks. All since the ceramic surface area takes the hit rather than the steel beneath.
Easy Installation, Maximum Insurance Coverage
The tiny 17.5 x17.5 mm size allows tight, seamless protection on intricate forms. You can fit these floor tiles into corners, curves, or irregular surface areas where huge panels would fall short. Each 5mm-thick tile bonds safely using commercial adhesives or mechanical fasteners. The outcome is a continual shield without any vulnerable points.
Due to the fact that the tiles are consistent and pre-cut, installment goes quicker. Workers invest less time measuring and reducing on-site. That suggests projects end up quicker and labor keeps focused.
Constructed for Tough Problems
These floor tiles resist not simply wear however also rust and high warmth. They perform well in wet, dry, acidic, or alkaline settings– common in mineral processing plants. Unlike rubber or polymer linings, they will not swell, fracture, or weaken when subjected to chemicals or temperature swings.
Their smooth surface additionally lowers material accumulation. Ores, slurries, and powders slide with even more quickly. Flow stays consistent. Clogs take place much less usually.
Mining groups depend on these ceramic mosaic floor tiles to maintain essential tools running under punishing problems. They use a basic, proven way to expand life span and boost operational efficiency across the whole mineral taking care of system.
Company Profile
Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.
Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.

Payment Methods
T/T, Western Union, Paypal, Credit Card etc.
Shipment Methods
By air, by sea, by express, as customers request.

5 FAQs of 92% Alumina Ceramic Mining Square Mosaic Tile – 17.5×17.5x5mm
Frequently Asked Questions: 92% Alumina Ceramic Mining Square Mosaic Tile (17.5×17.5x5mm)
What makes these tiles suitable for mining environments?
These tiles contain 92% alumina, which gives them very high hardness and strong resistance to wear. They can handle heavy impact and constant abrasion from rocks, ores, and machinery. This makes them ideal for lining chutes, hoppers, and other high-wear areas in mining operations.
How do I install these ceramic tiles?
The tiles come with pre-drilled holes or can be bonded using high-strength epoxy adhesives. You must clean and prepare the surface well before installation. Follow the adhesive manufacturer’s instructions closely. For extra security in high-vibration areas, mechanical fasteners are often used together with adhesive.
Are these tiles resistant to chemicals?
Yes. The high alumina content makes the tiles highly resistant to most acids, alkalis, and solvents found in mining and mineral processing. They will not corrode or degrade when exposed to common industrial chemicals.
What is the temperature range these tiles can handle?
These tiles work well in temperatures from -40°C up to 1,600°C. They keep their strength and shape even under extreme heat or cold, which is useful in both outdoor and high-temperature processing environments.
Why choose 17.5×17.5x5mm size?
This compact square size fits tight or curved surfaces easily. It allows flexible coverage on complex equipment shapes. The 5mm thickness gives enough durability without adding too much weight. Many customers find this size simple to handle, cut, and replace when needed.
REQUEST A QUOTE
RELATED PRODUCTS
Gravel’s Zirconia Ceramic Basket Gemstone with Alumina Coating
Zirconia Ceramic Basket Gemstone with Alumina Coating
Chemical Grade Activated Alumina (Aluminum Oxide) Ceramic
95% Alumina Ceramic Insulating Block with Holes
Low Maintenance, High Precision Alumina Ceramic Pump Parts & Rods


