100μm OD 2mm/3.5mm Alumina Micro Porous Ceramic Wick

PRODUCT PARAMETERS

Description
REQUEST A QUOTE

Description

Overview of 100μm OD 2mm/3.5mm Alumina Micro Porous Ceramic Wick

Alumina Ceramic, or Aluminum Oxide (Al₂O₃), is the most widely used and versatile advanced ceramic material. Known for its excellent balance of mechanical, thermal, and electrical properties, it is a cost-effective solution for a vast array of demanding industrial applications. Alumina components are produced in purity levels ranging from 85% to 99.9%, with properties enhancing as purity increases.

Features of 100μm OD 2mm/3.5mm Alumina Micro Porous Ceramic Wick

  • High Hardness & Wear Resistance: Offers exceptional resistance to abrasion and mechanical wear.
  • Excellent Electrical Insulation: Maintains high electrical resistivity even at elevated temperatures.
  • Good Thermal Conductivity: (For a ceramic) effectively dissipates heat, especially in higher purity grades.
  • High Compressive Strength: Capable of withstanding significant mechanical loads.
  • Chemical Inertness: Highly resistant to corrosion from acids, alkalis, and molten metals.
  • Cost-Effectiveness: Provides superior performance at a lower cost compared to many other technical ceramics.
100μm OD 2mm/3.5mm Alumina Micro Porous Ceramic Wick
100μm OD 2mm/3.5mm Alumina Micro Porous Ceramic Wick

Specifications of 100μm OD 2mm/3.5mm Alumina Micro Porous Ceramic Wick

Specifications of 100μm OD 2mm/3.5mm Alumina Micro Porous Ceramic Wick

Material and Structure

This wick is made from high-purity alumina (Al₂O₃). It has a micro porous structure with an average pore size of 100 micrometers (μm). The material offers strong thermal stability and excellent chemical resistance. Its rigid yet lightweight form supports consistent fluid transport without deformation under normal operating conditions.

Dimensions

Two outer diameter (OD) options are available: 2mm and 3.5mm. Both sizes share the same internal microstructure and performance characteristics. The length can be customized based on application needs. Standard lengths range from 10mm to 100mm, but other sizes are possible upon request.

Key Performance Features

The wick delivers reliable capillary action for liquid movement in passive thermal management systems. It works well in high-temperature environments—up to 1600°C in air. The uniform pore distribution ensures even fluid flow and minimizes dry-out risk.

Because it is made of ceramic, the wick does not corrode when exposed to water, oils, or many common solvents. It also resists oxidation and maintains structural integrity over long-term use.

Common Applications

This alumina wick is often used in heat pipes, vapor chambers, and laboratory evaporation setups. It suits applications that need stable, maintenance-free fluid transport at elevated temperatures. Engineers choose it for aerospace cooling, industrial sensors, and precision thermal control devices.

Handling and Installation

Handle with care—ceramic materials can crack under sharp impact or bending stress. Use soft-tipped tools during assembly. Clean with distilled water or mild solvents before first use to remove any surface dust. Avoid ultrasonic cleaning unless specified by the manufacturer.

100μm OD 2mm/3.5mm Alumina Micro Porous Ceramic Wick
100μm OD 2mm/3.5mm Alumina Micro Porous Ceramic Wick

Applications of 100μm OD 2mm/3.5mm Alumina Micro Porous Ceramic Wick

Applications of 100μm OD 2mm/3.5mm Alumina Micro Porous Ceramic Wick

Precision Fluid Control in High-Temperature Environments

The 100μm OD 2mm/3.5mm alumina micro porous ceramic wick delivers reliable performance where heat and chemical stability matter most. Made from high-purity alumina, this wick resists thermal shock and maintains structural integrity even above 1000°C. Its uniform pore structure ensures consistent capillary action, making it ideal for controlled fluid transport in demanding settings.

Use in Vapor Chamber and Heat Pipe Systems

Engineers use this ceramic wick in advanced vapor chambers and heat pipes. It moves working fluids like water or ammonia without pumps, relying only on capillary forces. The small outer diameter (100μm) fits tight spaces, while the 2mm or 3.5mm lengths suit different thermal load requirements. This design helps electronics stay cool in servers, aerospace hardware, and power modules.

Gas Sensing and Filtration Support

The wick’s fine pores also support gas diffusion in sensor systems. It evenly distributes sample gases across sensing elements, improving response time and accuracy. In filtration, it acts as a pre-filter or support layer, blocking particles while letting gases pass. Its inert surface prevents unwanted reactions, which is critical in analytical and environmental monitoring devices.

Laboratory and Industrial Process Integration

In labs, this wick works well in microfluidic setups and high-temperature reactors. It handles corrosive solvents and molten salts without degrading. Factories use it in metal casting, glass processing, and fuel cell components where long-term reliability is non-negotiable. The material won’t swell, crack, or leach contaminants, ensuring clean operation over time.

Key advantages include:
– Stable performance under extreme heat
– Consistent pore size for predictable flow
– Chemical resistance to acids, bases, and solvents
– Mechanical strength despite thin dimensions

This ceramic wick solves tough fluid management problems where metals or polymers fail. Its simple geometry and robust material make it a go-to choice for engineers pushing system limits.


Company Profile

Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.


Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.


Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

5 FAQs of 100μm OD 2mm/3.5mm Alumina Micro Porous Ceramic Wick

Frequently Asked Questions: 100μm OD 2mm/3.5mm Alumina Micro Porous Ceramic Wick

What is this ceramic wick made of?

This wick is made from high-purity alumina (aluminum oxide). It has a fine, uniform pore structure. The material is stable at high temperatures and resists chemical corrosion.

What does “100μm OD 2mm/3.5mm” mean?

“OD” stands for outer diameter. The wick’s pore size is about 100 micrometers. It comes in two standard outer diameters: 2mm and 3.5mm. You can choose the size that fits your device or application.

Where is this wick used?

People use it in vaporizers, lab equipment, and small-scale thermal systems. Its porous design helps draw liquid evenly. This makes heating more consistent and efficient.

Why choose alumina over other materials?

Alumina handles heat very well—it stays strong even above 1000°C. It does not react with most liquids or vapors. It also lasts longer than metal or polymer wicks in harsh conditions.

How do I install or replace the wick?

First, turn off and cool down your device. Gently remove the old wick. Slide the new ceramic wick into place. Make sure it sits firmly and lines up with the heating element. Do not force it—ceramic can crack under pressure. After installation, test with low power before full use.

REQUEST A QUOTE

REQUEST A QUOTE