Manufactory Precision Technical Alumina (Al2O3) Ceramic Bush

PRODUCT PARAMETERS

Description
REQUEST A QUOTE

Description

Overview of Manufactory Precision Technical Alumina (Al2O3) Ceramic Bush

Alumina Ceramic, or Aluminum Oxide (Al₂O₃), is the most widely used and versatile advanced ceramic material. Known for its excellent balance of mechanical, thermal, and electrical properties, it is a cost-effective solution for a vast array of demanding industrial applications. Alumina components are produced in purity levels ranging from 85% to 99.9%, with properties enhancing as purity increases.

Features of Manufactory Precision Technical Alumina (Al2O3) Ceramic Bush

  • High Hardness & Wear Resistance: Offers exceptional resistance to abrasion and mechanical wear.
  • Excellent Electrical Insulation: Maintains high electrical resistivity even at elevated temperatures.
  • Good Thermal Conductivity: (For a ceramic) effectively dissipates heat, especially in higher purity grades.
  • High Compressive Strength: Capable of withstanding significant mechanical loads.
  • Chemical Inertness: Highly resistant to corrosion from acids, alkalis, and molten metals.
  • Cost-Effectiveness: Provides superior performance at a lower cost compared to many other technical ceramics.
ai-Alumina-1-1775977632080
Manufactory Precision Technical Alumina (Al2O3) Ceramic Bush

Specifications of Manufactory Precision Technical Alumina (Al2O3) Ceramic Bush

Manufactory Precision Technical Alumina (Al ₂ O THREE) Ceramic Bush– Secret Specs

Product Structure

High-purity alumina (Al two O SIX) forms the core of this ceramic bush. The material contains 95% to 99.8% Al ₂ O ₃, depending upon the grade. This high pureness guarantees superb mechanical toughness and chemical security. No binders or fillers are added that could compromise performance.

Physical Qualities

The shrub shows a thickness of 3.6– 3.9 g/cm SIX. Its firmness reaches up to 1500– 1800 HV on the Vickers range. Thermal conductivity ranges from 20 to 30 W/m ·K. The coefficient of thermal growth remains low at 6.5– 8.0 × 10 ⁻⁶/ ° C (from 20 ° C to 800 ° C). These characteristics make it secure under heat and stress and anxiety.

Mechanical Performance

Compressive strength exceeds 2000 MPa. Flexural strength is typically 300– 400 MPa. The product resists wear and keeps shape even after long use. It does not warp easily under lots, which is crucial for precision applications.

Electric & Chemical Resistance

This ceramic bush acts as an excellent electric insulator, with volume resistivity over 10 ¹⁴ Ω · centimeters at space temperature. It withstands strong acids, antacid, and solvents. Direct exposure to extreme chemicals will certainly not trigger rust or deterioration.

Dimensional Accuracy

Produced to limited tolerances, the bush meets ± 0.005 mm on critical dimensions. Surface area surface can be as smooth as Ra 0.2 µm. Personalized dimensions and geometries are readily available upon request, all held to the same accuracy criteria.

Running Conditions

It executes reliably from -200 ° C to +1600 ° C in air. Continuous use at heats does not minimize its structural stability. The bush stays stable in vacuum cleaner and inert ambiences too.

ai-a-26-1774949529086
Manufactory Precision Technical Alumina (Al2O3) Ceramic Bush

Applications of Manufactory Precision Technical Alumina (Al2O3) Ceramic Bush

Applications of Factory Accuracy Technical Alumina (Al Two O SIX) Ceramic Bush

High-Performance Sealing and Support in Demanding Environments

Precision technological alumina ceramic bushes are commonly made use of where steel components would fall short. These elements deal with severe warm, solid chemicals, and heavy wear without degrading. Their solidity and smooth surface area make them optimal for assisting shafts or poles in tight-tolerance systems.

Industrial Machinery
In pumps, compressors, and mixers, alumina ceramic shrubs serve as wear-resistant sleeves. They lower rubbing and stop metal-to-metal call. This extends tools life and cuts maintenance prices. Their non-magnetic nature likewise matches them for delicate electronic or clinical devices.

Semiconductor Production
Cleanroom atmospheres demand materials that do not drop fragments or react with procedure gases. Alumina ceramic shrubs meet these demands. They support moving parts inside wafer taking care of robotics and vacuum cleaner chambers. Their electrical insulation stops roaming currents that could harm fragile circuits.

Aerospace and Protection
Jet engines and rocket guidance systems run under extreme thermal stress and anxiety. Alumina ceramic bushes keep dimensional stability at high temperatures. They likewise withstand corrosion from gas and hydraulic liquids. This dependability is essential for security and performance in trip systems.

Clinical Devices
Surgical devices and imaging machines require parts that can be decontaminated continuously. Alumina ceramic shrubs hold up against autoclaving and chemical anti-bacterials. They offer biocompatibility and lengthy service life without launching unsafe substances.

Automotive Systems
In electrical vehicles and gas injection units, these ceramic bushes give exact motion control. They function well in high-voltage setups because of their superb dielectric strength. Their light-weight nature likewise supports effectiveness goals in modern-day automobile design.


Company Profile

Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.


Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.


Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

ai-choosing-10-1774949244567
Manufactory Precision Technical Alumina (Al2O3) Ceramic Bush

5 FAQs of Manufactory Precision Technical Alumina (Al2O3) Ceramic Bush

Frequently Asked Questions About Precision Technical Alumina Ceramic Bushes

What is a technical alumina ceramic bush?

A technical alumina ceramic bush is a small cylindrical part made from high-purity aluminum oxide (Al₂O₃). It works as a wear-resistant sleeve or liner in machinery. These bushes handle high stress, heat, and corrosion better than metal or plastic parts.

Why choose alumina over other materials?

Alumina ceramic offers excellent hardness, electrical insulation, and thermal stability. It does not rust. It keeps its shape under high temperatures. This makes it ideal for demanding environments like pumps, valves, and semiconductor equipment.

How precise are these ceramic bushes?

Our bushes are manufactured to tight tolerances—often within ±0.005 mm. We use advanced grinding and lapping processes. This ensures smooth surfaces and exact dimensions needed for critical applications.

Can you customize the size or shape?

Yes. We support custom designs based on your drawings or samples. You can request different inner diameters, outer diameters, lengths, or even special features like grooves or flanges. Just share your specs with our team.

What industries use these ceramic bushes?

These bushes are common in aerospace, medical devices, electronics, chemical processing, and automotive sectors. Any place that needs reliability, cleanliness, and long service life under tough conditions may use them. They help reduce maintenance and downtime.

REQUEST A QUOTE

REQUEST A QUOTE