Next-Generation Ceramics: Unlocking Superior Properties for Industry
PRODUCT PARAMETERS
Description
Overview of Alumina (Aluminum Oxide) Fine Powder for Ceramics (CAS 1344-28-1)
Alumina Ceramic, or Aluminum Oxide (Al₂O₃), is the most widely used and versatile advanced ceramic material. Known for its excellent balance of mechanical, thermal, and electrical properties, it is a cost-effective solution for a vast array of demanding industrial applications. Alumina components are produced in purity levels ranging from 85% to 99.9%, with properties enhancing as purity increases.
Features of Alumina (Aluminum Oxide) Fine Powder for Ceramics (CAS 1344-28-1)
- High Hardness & Wear Resistance: Offers exceptional resistance to abrasion and mechanical wear.
- Excellent Electrical Insulation: Maintains high electrical resistivity even at elevated temperatures.
- Good Thermal Conductivity: (For a ceramic) effectively dissipates heat, especially in higher purity grades.
- High Compressive Strength: Capable of withstanding significant mechanical loads.
- Chemical Inertness: Highly resistant to corrosion from acids, alkalis, and molten metals.
- Cost-Effectiveness: Provides superior performance at a lower cost compared to many other technical ceramics.

Specifications of Alumina (Aluminum Oxide) Fine Powder for Ceramics (CAS 1344-28-1)
Alumina (Light Weight Aluminum Oxide) Penalty Powder for Ceramics
Item Review
This fine powder is high-purity aluminum oxide (Al ₂ O THREE), likewise known as alumina. It carries CAS number 1344-28-1. The material is specifically refined for use in advanced ceramic applications. Its regular fragment size and chemical stability make it suitable for generating solid, sturdy ceramic components.
Trick Requirements
Purity: Minimum 99.5% Al Two O SIX.
Bit Dimension: Typical D50 of 0.5 to 1.0 microns.
BET Surface: 5– 10 m ²/ g.
Moisture Material: Much less than 0.2%.
Loss on Ignition (LOI): Below 0.5% at 1000 ° C.
Shade: White.
pH (10% slurry): 6.0– 8.0.
The powder reveals low degrees of impurities such as sodium, silica, and iron. These micronutrient are kept under stringent control to prevent undesirable reactions throughout sintering. Tight structure limitations aid make sure reliable performance in technological ceramics.
Common Applications
Makers utilize this alumina powder to make structural ceramics, wear-resistant elements, electric insulators, and substratums for electronic devices. It functions well in both dry pushing and slip casting methods. The fine particle size sustains high environment-friendly thickness and uniform contraction during shooting. This brings about less flaws and far better end product top quality.
Handling and Storage
Store the powder in a completely dry, great area. Keep containers secured when not being used to avoid dampness absorption. Use conventional commercial health methods when managing. Stay clear of producing dirt clouds. Use ideal personal safety devices, consisting of gloves and a dust mask.

Applications of Alumina (Aluminum Oxide) Fine Powder for Ceramics (CAS 1344-28-1)
Applications of Alumina (Aluminum Oxide) Fine Powder in Ceramics
High-Performance Porcelain Components
Alumina fine powder (CAS 1344-28-1) is a vital raw material for making advanced technological porcelains. Its high pureness and regular bit dimension assistance create dense, solid ceramic components. These components are utilized in industries where dependability matters– like aerospace, electronics, and clinical devices.
Electrical Insulation and Electronic Devices
Ceramic insulators made with alumina powder offer excellent electrical resistance. They work well even at high temperatures. This makes them suitable for spark plugs, substratums for circuits, and protective real estates in electronic systems. The powder’s stability makes certain long-lasting performance without malfunction.
Wear-Resistant Products
Alumina-based ceramics are incredibly hard. That firmness gives them wonderful wear resistance. Suppliers utilize them to make cutting devices, grinding media, and linings for pipelines or pumps that deal with rough materials. These products last longer and reduce downtime in commercial operations.
Bio-Ceramics and Clinical Uses
In the clinical area, high-purity alumina powder kinds biocompatible ceramics. These products enter into hip joints, oral implants, and medical tools. Their smooth surface and chemical inertness assistance stop being rejected by the body and support secure, lasting use.
Refractory and High-Temperature Applications
Because alumina melts at very high temperatures, it is excellent for refractory ceramics. Kiln furnishings, heating system linings, and thermal barriers all benefit from its warm resistance. The fine powder permits tight control over the final product’s structure and stamina.
Accuracy Production
The consistent particle dimension of alumina great powder allows precise shaping and sintering. This results in components with tight tolerances and smooth surfaces– critical for sensing units, seals, and optical components. Consistency in the raw product straight enhances high quality in the ended up ceramic product.
Company Profile
Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.
Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.

Payment Methods
T/T, Western Union, Paypal, Credit Card etc.
Shipment Methods
By air, by sea, by express, as customers request.

5 FAQs of Alumina (Aluminum Oxide) Fine Powder for Ceramics (CAS 1344-28-1)
Frequently Asked Questions About Alumina (Aluminum Oxide) Fine Powder for Ceramics
What is alumina fine powder used for in ceramics?
Alumina fine powder is a key raw material in making high-performance ceramics. It helps create products that are strong, hard, and able to handle high temperatures. Common uses include spark plugs, cutting tools, wear-resistant parts, and electronic substrates.
Why choose high-purity alumina powder?
High-purity alumina (typically 99.5% or more) gives better mechanical strength and thermal stability. Impurities can weaken the final ceramic part or cause defects during firing. Using pure alumina ensures consistent quality and performance in demanding applications.
How does particle size affect ceramic properties?
Fine particle size leads to denser, smoother ceramics after sintering. Smaller particles pack tightly together, which reduces pores and boosts strength. For precision parts or thin layers, a narrow particle size distribution is essential to get uniform results.
Is this alumina powder safe to handle?
Alumina powder is not highly toxic, but it should still be handled with care. Avoid breathing in the dust. Use proper ventilation, gloves, and eye protection. Store it in a dry place away from moisture to keep its quality stable.
What makes your alumina powder different?
Our alumina fine powder meets strict quality standards for purity, particle size, and consistency. It is made under controlled conditions to suit advanced ceramic manufacturing. Customers rely on it for repeatable performance batch after batch.
REQUEST A QUOTE
RELATED PRODUCTS
4N High Purity Alumina for High-Strength Ceramic Balls
100mm/125mm Grinder Discs: Zirconia/Alumina/SiC Fiber/Paper
Chemically Stable Alumina Ceramic Round Shaft
Industrial Machinery Alumina Ceramic Parts
Custom Heat & Cold Resistant Alumina Ceramic Plunger

