Boron Nitride Conductive Ceramic Evaporation Boats for Vacuum Metal Coating

PRODUCT PARAMETERS

Description
REQUEST A QUOTE

Description

Overview of Boron Nitride Conductive Ceramic Evaporation Boats for Vacuum Metal Coating

Boron Nitride (BN) exists in multiple polymorphs, with Hexagonal Boron Nitride (h-BN) being the most common ceramic form. Often called “white graphite” due to its similar layered, lubricious structure, it is distinguished by its exceptional thermal stability, electrical insulation, and chemical inertness, even at extreme temperatures.

Features of Boron Nitride Conductive Ceramic Evaporation Boats for Vacuum Metal Coating

  • High Thermal Conductivity & Excellent Electrical Insulation: Unique combination that allows it to conduct heat like a metal but insulate like a ceramic.
  • Outstanding Thermal Shock Resistance: Can be heated and cooled rapidly without cracking.
  • Natural Lubricity: Exhibits low friction and anti-stick properties, even at high temperatures.
  • Chemically Inert: Resists wetting by and reaction with most molten metals, slags, and glasses.
  • Machinable: Unlike most advanced ceramics, h-BN in its solid form can be machined to precision tolerances using conventional carbide tooling.
Boron Nitride Conductive Ceramic Evaporation Boats for Vacuum Metal Coating
Boron Nitride Conductive Ceramic Evaporation Boats for Vacuum Metal Coating

Specifications of Boron Nitride Conductive Ceramic Evaporation Boats for Vacuum Metal Coating

Specifications of Boron Nitride Conductive Ceramic Evaporation Boats

Product Composition

These dissipation boats are made from high-purity boron nitride blended with a conductive additive. The base product is hexagonal boron nitride (h-BN), understood for its excellent thermal stability and chemical inertness. A small amount of conductive phase– generally titanium diboride (TiB TWO) or zirconium diboride (ZrB ₂)– is included in permit electric present circulation. This combination gives the watercraft both insulation and conductivity where required.

Physical Features

The normal density ranges from 1.9 to 2.1 g/cm FOUR. Porosity remains below 5%, which helps prevent metal leakage during evaporation. The boats show solid mechanical toughness at high temperatures, with flexural strength above 80 MPa at space temperature and still over 50 MPa at 1000 ° C. Thermal conductivity is modest– around 30– 60 W/m · K– enough to spread out warmth equally without locations.

Electrical Performance

Electric resistivity drops between 0.01 and 0.1 Ω · centimeters, depending on the conductive additive material. This low resistance makes certain steady heating under typical vacuum cleaner covering power materials. The boats heat up rapidly and maintain consistent temperature across their surface, which leads to consistent metal evaporation.

Running Problems

These watercrafts function well in high vacuum settings, normally listed below 1 × 10 ⁻⁴ Pa. They take care of constant use at temperature levels as much as 1800 ° C in inert or vacuum environments. They resist strike from a lot of molten metals, consisting of aluminum, gold, silver, and copper. Their non-wetting surface keeps molten metal consisted of and reduces contamination.

Dimensions and Modification

Standard sizes consist of lengths from 50 mm to 200 mm, sizes from 10 mm to 30 mm, and thicknesses from 2 mm to 5 mm. Custom shapes and measurements are readily available upon request. Each boat features smooth sides and consistent cross-sections to fit typical power feed configurations.

Boron Nitride Conductive Ceramic Evaporation Boats for Vacuum Metal Coating
Boron Nitride Conductive Ceramic Evaporation Boats for Vacuum Metal Coating

Applications of Boron Nitride Conductive Ceramic Evaporation Boats for Vacuum Metal Coating

Applications of Boron Nitride Conductive Ceramic Evaporation Watercrafts for Vacuum Metal Coating

Reputable Performance in Demanding Environments

Boron nitride conductive ceramic evaporation watercrafts are commonly utilized in vacuum cleaner steel covering processes. These watercrafts provide solid thermal stability and exceptional electrical conductivity. They hold up well under high temperatures without splitting or flawing. This makes them perfect for depositing thin steel films in vacuum chambers.

Manufacturers pick these dissipation boats due to the fact that they withstand chemical reactions with liquified metals. Usual layer products like aluminum, gold, and silver do not stay with the boat surface. As a result, the watercrafts last much longer and provide consistent results over many production cycles.

Accuracy and Purity in Thin-Film Deposition

The smooth surface area of boron nitride boats assists produce uniform steel layers. There is little risk of contamination during evaporation. This is essential for sectors that need tidy, high-purity finishes– such as optics, semiconductors, and aerospace.

These boats warm uniformly because of their steady electrical buildings. Operators can regulate the dissipation price extra accurately. That brings about better film density control and fewer problems in the end product.

Compatibility with Standard Devices

Boron nitride conductive ceramic boats fit quickly right into a lot of existing vacuum finish systems. They deal with conventional power products and do not call for special components. This reduces setup time and maintains operating costs low.

Their layout enables fast substitute between runs. Assembly line stay effective without long downtimes. Individuals additionally benefit from minimal upkeep requirements and foreseeable performance follow run.

Whether utilized for reflective layers on packaging movies or conductive layers on digital elements, these evaporation boats support premium result. Their mix of sturdiness, purity, and simplicity of usage makes them a trusted selection throughout several innovative production fields.


Company Profile

Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.


Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.


Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

Boron Nitride Conductive Ceramic Evaporation Boats for Vacuum Metal Coating
Boron Nitride Conductive Ceramic Evaporation Boats for Vacuum Metal Coating

5 FAQs of Boron Nitride Conductive Ceramic Evaporation Boats for Vacuum Metal Coating

Frequently Asked Questions About Boron Nitride Conductive Ceramic Evaporation Boats

What are boron nitride evaporation boats used for?

These boats hold metal during vacuum coating. They heat the metal until it evaporates. The vapor then coats surfaces like glass or plastic. This process is common in making mirrors, electronics, and optical films.

Why choose boron nitride over other materials?

Boron nitride resists high heat without breaking down. It does not react with most molten metals. It also conducts electricity well enough to work with direct heating. This makes it stable, clean, and long-lasting in tough vacuum environments.

Can these boats handle repeated heating cycles?

Yes. They keep their shape and strength after many heat-cool cycles. Thermal shock does not crack them easily. Users report consistent performance over hundreds of runs when used within temperature limits.

Are they compatible with aluminum and other common coating metals?

They work well with aluminum, silver, gold, and chromium. Boron nitride does not stick to these metals. That means less waste and cleaner coatings. Always check the specific metal’s melting point to stay within the boat’s safe range.

How do I install and use these evaporation boats?

Mount the boat securely in your vacuum chamber. Connect it to a power source that matches its resistance. Load the metal evenly inside. Slowly increase current to avoid sudden stress. Keep the chamber clean and follow your system’s safety steps. Proper handling helps the boat last longer and gives better coating results.

REQUEST A QUOTE

REQUEST A QUOTE