0.5mm Thick 96% Al2O3 Alumina Ceramic Substrate Plate

PRODUCT PARAMETERS

Description
REQUEST A QUOTE

Description

Overview of 0.5mm Thick 96% Al2O3 Alumina Ceramic Substrate Plate

Alumina Ceramic, or Aluminum Oxide (Al₂O₃), is the most widely used and versatile advanced ceramic material. Known for its excellent balance of mechanical, thermal, and electrical properties, it is a cost-effective solution for a vast array of demanding industrial applications. Alumina components are produced in purity levels ranging from 85% to 99.9%, with properties enhancing as purity increases.

Features of 0.5mm Thick 96% Al2O3 Alumina Ceramic Substrate Plate

  • High Hardness & Wear Resistance: Offers exceptional resistance to abrasion and mechanical wear.
  • Excellent Electrical Insulation: Maintains high electrical resistivity even at elevated temperatures.
  • Good Thermal Conductivity: (For a ceramic) effectively dissipates heat, especially in higher purity grades.
  • High Compressive Strength: Capable of withstanding significant mechanical loads.
  • Chemical Inertness: Highly resistant to corrosion from acids, alkalis, and molten metals.
  • Cost-Effectiveness: Provides superior performance at a lower cost compared to many other technical ceramics.
ai-silicon-13-1772435865566-1
0.5mm Thick 96% Al2O3 Alumina Ceramic Substrate Plate

Specifications of 0.5mm Thick 96% Al2O3 Alumina Ceramic Substrate Plate

0.5 mm Thick 96% Al Two O Six Alumina Porcelain Substratum Plate

Material Make-up

This substratum plate is made from 96% pure light weight aluminum oxide (Al two O THREE). The continuing to be 4% contains ingredients that aid the product sinter properly throughout production. This structure offers home plate a strong balance of mechanical strength, electric insulation, and thermal security.

Physical Dimensions

The plate has an uniform density of 0.5 millimeters . It is available in conventional sheet sizes or custom-cut measurements based upon your needs. The sides are smooth, and the surface coating is fine-ground to ensure consistent flatness and very little surface area roughness.

Trick Performance Features

High Electric Resistivity: The 96% alumina content offers outstanding electric insulation, even at high voltages and raised temperatures.
Excellent Thermal Conductivity: It successfully moves heat far from sensitive parts, which assists preserve secure operating problems in electronic assemblies.
Mechanical Stamina: Despite its slim account, home plate withstands bending and fracturing under typical handling and assembly stress.
Chemical Stability: It does not respond with the majority of acids, alkalis, or solvents, making it ideal for harsh settings.

Common Applications

This ceramic substrate is extensively utilized in power electronics, hybrid circuits, sensors, and LED packaging. Its slim type factor makes it suitable for compact layouts where space is limited but efficiency can not be endangered. Designers also choose it for RF modules and automobile electronic devices because of its integrity over a vast temperature variety.

Processing and Handling

The plate can be laser-cut, pierced, or metallized using basic thick-film processes. Take care of with care– though strong, its slimness means it can chip if gone down or messed up. Shop in a completely dry, tidy setting to prevent surface area contamination prior to usage.

ceramic crucible (36)
0.5mm Thick 96% Al2O3 Alumina Ceramic Substrate Plate

Applications of 0.5mm Thick 96% Al2O3 Alumina Ceramic Substrate Plate

Applications of 0.5 mm Thick 96% Al Two O ₃ Alumina Ceramic Substratum Plate

High-Performance Electronics

0.5 mm thick 96% alumina ceramic substrate plates are commonly made use of in digital circuits that need steady performance under difficult conditions. Their solid electric insulation stops present leak. At the same time, they deal with high voltages without damaging down. These plates function well in power modules, crossbreed circuits, and surface-mount devices where space is limited yet dependability issues.

Sensing Units and Dimension Devices

These substratums are suitable for sensing units that run in warm or destructive places. The material resists warm up to 1600 ° C and does not respond with the majority of chemicals. This makes it perfect for stress sensing units, gas detectors, and temperature level probes used in industrial systems or vehicle engines. The slim 0.5 mm profile enables quick reaction times while keeping mechanical strength.

LED and Optoelectronic Devices

In LED illumination and optoelectronics, warm control is critical. The 96% alumina plate spreads warm uniformly and keeps elements cool. Its smooth surface sustains precise installing of chips and cables. Due to the fact that it stays level also after repeated heating cycles, it assists maintain optical placement and long-term brightness.

Vacuum and High-Frequency Systems

The low outgassing and stable dielectric buildings of this ceramic make it suitable for vacuum chambers and RF applications. It carries out accurately in microwave circuits, radar systems, and interaction equipment. The 0.5 mm thickness decreases signal loss while offering adequate rigidity for taking care of during setting up.

Medical and Aerospace Components

Clinical devices like imaging devices and implantable electronic devices use these substrates for their biocompatibility and sturdiness. In aerospace, they sustain navigation and control systems that face severe temperature levels and resonances. The constant high quality of 96% alumina guarantees safety and feature in life-critical uses.


Company Profile

Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.


Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.


Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

ceramic crucible (20)
0.5mm Thick 96% Al2O3 Alumina Ceramic Substrate Plate

5 FAQs of 0.5mm Thick 96% Al2O3 Alumina Ceramic Substrate Plate

Frequently Asked Questions About 0.5mm Thick 96% Al₂O₃ Alumina Ceramic Substrate Plates

What is a 0.5mm thick 96% Al₂O₃ alumina ceramic substrate plate?

This is a thin, flat piece made mostly of aluminum oxide (Al₂O₃). It contains 96% pure alumina. The rest includes additives that help with manufacturing and performance. At just 0.5mm thick, it is lightweight yet strong.

Why choose 96% alumina over other ceramics?

96% alumina offers a good balance of cost and performance. It has high electrical insulation, good thermal conductivity, and strong mechanical strength. It also resists wear, corrosion, and high temperatures. These features make it ideal for electronics, sensors, and industrial parts.

Can this substrate handle high temperatures?

Yes. This ceramic can work continuously at temperatures up to 1600°C. It stays stable and does not deform or break down easily under heat. That makes it reliable in demanding thermal environments.

Is the surface smooth enough for circuit printing?

Yes. The surface is polished to a fine finish. It allows precise screen printing or thin-film deposition. This ensures clean, accurate patterns for electronic circuits without defects.

How do I cut or shape this ceramic plate?

Standard cutting tools will not work. You need diamond-coated tools or laser cutting equipment. Always follow safety guidelines. Handle the material carefully—it is hard but can crack if mishandled. For best results, let professionals do the machining.

REQUEST A QUOTE

REQUEST A QUOTE