95% Alumina (Al2O3) Ceramic Spare Parts / Elements

PRODUCT PARAMETERS

Description
REQUEST A QUOTE

Description

Overview of 95% Alumina (Al2O3) Ceramic Spare Parts / Elements

Alumina Ceramic, or Aluminum Oxide (Al₂O₃), is the most widely used and versatile advanced ceramic material. Known for its excellent balance of mechanical, thermal, and electrical properties, it is a cost-effective solution for a vast array of demanding industrial applications. Alumina components are produced in purity levels ranging from 85% to 99.9%, with properties enhancing as purity increases.

Features of 95% Alumina (Al2O3) Ceramic Spare Parts / Elements

  • High Hardness & Wear Resistance: Offers exceptional resistance to abrasion and mechanical wear.
  • Excellent Electrical Insulation: Maintains high electrical resistivity even at elevated temperatures.
  • Good Thermal Conductivity: (For a ceramic) effectively dissipates heat, especially in higher purity grades.
  • High Compressive Strength: Capable of withstanding significant mechanical loads.
  • Chemical Inertness: Highly resistant to corrosion from acids, alkalis, and molten metals.
  • Cost-Effectiveness: Provides superior performance at a lower cost compared to many other technical ceramics.
95% Alumina (Al2O3) Ceramic Spare Parts / Elements
95% Alumina (Al2O3) Ceramic Spare Parts / Elements

Specifications of 95% Alumina (Al2O3) Ceramic Spare Parts / Elements

Specs of 95% Alumina (Al Two O SIX) Ceramic Spare Parts

Material Composition

These extra parts are made from 95% pure alumina (Al ₂ O TWO). The remaining 5% includes ingredients that help with sintering and improve mechanical stamina. This make-up supplies a strong equilibrium in between efficiency, durability, and expense.

Physical Features

The product has a high density , typically in between 3.60– 3.70 g/cm SIX. Its firmness ranks around 1500– 1700 HV on the Vickers range, making it very immune to put on. The flexural strength is commonly 300– 350 MPa, while the compressive strength can exceed 2000 MPa. These values make certain dependable performance under hefty mechanical tons.

Thermal Attributes

95% alumina ceramic takes care of warmth well. It has a optimum continuous use temperature level of concerning 1600 ° C in air. Its thermal conductivity varies from 20– 25 W/m · K, which helps dissipate warm efficiently. The coefficient of thermal expansion is reduced– around 6.5– 7.5 × 10 ⁻⁶/ ° C– so the parts remain dimensionally steady during temperature level changes.

Electrical Performance

This ceramic is an excellent electrical insulator . At space temperature level, its dielectric stamina is over 10 kV/mm. The quantity resistivity exceeds 10 ¹⁴ Ω · centimeters, even at elevated temperature levels. These characteristics make it perfect for high-voltage or high-frequency applications.

Chemical Resistance

95% alumina shows solid resistance to most acids, antacid, and solvents. It does not corrode quickly, also in harsh chemical atmospheres. However, it might respond with hydrofluoric acid or strong alkalis at heats.

Usual Applications

You’ll find these parts used in pump seals, valve seats, insulators, use plates, and furnace components . They work well any place hardness, warm resistance, or electric insulation is required. Personalized shapes and sizes are available to meet specific engineering demands.

95% Alumina (Al2O3) Ceramic Spare Parts / Elements
95% Alumina (Al2O3) Ceramic Spare Parts / Elements

Applications of 95% Alumina (Al2O3) Ceramic Spare Parts / Elements

Applications of 95% Alumina Ceramic Spare Components

Why Select 95% Alumina?

95% alumina ceramic supplies a solid mix of hardness, use resistance, and electric insulation. It deals with high temperatures well and resists deterioration from a lot of chemicals. These attributes make it suitable for requiring industrial settings where steel or plastic components would stop working rapidly.

Usual Utilizes in Industry

In semiconductor production, 95% alumina parts act as insulators, wafer chucks, and chamber linings. They maintain electric systems secure and remain clean under vacuum cleaner and plasma conditions.

The electronic devices market usages these porcelains for substrates, feedthroughs, and sensing unit real estates. Their consistent dielectric homes help keep signal honesty in high-frequency circuits.

For chemical processing equipment, alumina parts work as pump seals, valve seats, and nozzles. They take on hostile acids and antacids without deteriorating.

In clinical gadgets, 95% alumina shows up in medical tool deals with, dental implant components, and diagnostic instrument parts. It is biocompatible and can be decontaminated repetitively without damages.

Mechanical systems also advantage. Bearings, overview rails, and wear plates made from this ceramic last longer than conventional materials in rough setups like textile machinery or powder handling systems.

Efficiency You Can Rely Upon

These extra components provide long service life with marginal maintenance. They do not corrosion, swell, or flaw under tension. Their smooth surface decreases friction and protects against bit accumulation– vital in cleanrooms or accuracy assembly lines.

Due to the fact that 95% alumina is stiff yet light-weight, it supports tight tolerances and intricate forms. This makes it appropriate for customized parts that must fit completely right into existing configurations.

Industries choose this product when failure is not a choice. Whether dealing with warm, wear, or electric demands, 95% alumina ceramic parts do constantly day in day out.


Company Profile

Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.


Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.


Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

5 FAQs of 95% Alumina (Al2O3) Ceramic Spare Parts / Elements

Frequently Asked Questions About 95% Alumina Ceramic Spare Parts

What is 95% alumina ceramic?

95% alumina ceramic is a high-performance material made mostly of aluminum oxide (Al₂O₃). It contains about 95% pure alumina. The rest includes small amounts of additives that help with shaping and sintering. This material is very hard, strong, and resistant to wear and heat.

Why choose 95% alumina over other ceramics?

95% alumina offers a good balance of cost and performance. It is harder and more durable than many standard ceramics. It also handles high temperatures well and resists chemical corrosion. For many industrial uses, it works better than metals or plastics in harsh conditions.

Where are these parts commonly used?

These ceramic spare parts are used in many industries. You’ll find them in semiconductor manufacturing, textile machinery, pumps, valves, and electrical insulators. They work well wherever parts face high wear, extreme heat, or corrosive chemicals.

How long do 95% alumina parts last?

Their service life depends on the application. In most cases, they last much longer than metal or plastic alternatives. Because they resist abrasion and do not corrode easily, they often reduce downtime and maintenance costs.

Can these parts be customized?

Yes. Manufacturers can shape 95% alumina into many forms—rings, tubes, plates, nozzles, and more. Custom dimensions and tolerances are possible. Just provide your design or specifications, and the part can be made to fit your exact needs.

REQUEST A QUOTE

REQUEST A QUOTE