Laser Scribed 0.25mm/0.30mm Alumina (Al2O3) Ceramic Substrate Plate

PRODUCT PARAMETERS

Description
REQUEST A QUOTE

Description

Overview of Laser Scribed 0.25mm/0.30mm Alumina (Al2O3) Ceramic Substrate Plate

Alumina Ceramic, or Aluminum Oxide (Al₂O₃), is the most widely used and versatile advanced ceramic material. Known for its excellent balance of mechanical, thermal, and electrical properties, it is a cost-effective solution for a vast array of demanding industrial applications. Alumina components are produced in purity levels ranging from 85% to 99.9%, with properties enhancing as purity increases.

Features of Laser Scribed 0.25mm/0.30mm Alumina (Al2O3) Ceramic Substrate Plate

  • High Hardness & Wear Resistance: Offers exceptional resistance to abrasion and mechanical wear.
  • Excellent Electrical Insulation: Maintains high electrical resistivity even at elevated temperatures.
  • Good Thermal Conductivity: (For a ceramic) effectively dissipates heat, especially in higher purity grades.
  • High Compressive Strength: Capable of withstanding significant mechanical loads.
  • Chemical Inertness: Highly resistant to corrosion from acids, alkalis, and molten metals.
  • Cost-Effectiveness: Provides superior performance at a lower cost compared to many other technical ceramics.
ai-pressureless-0-1774683449048
Laser Scribed 0.25mm/0.30mm Alumina (Al2O3) Ceramic Substrate Plate

Specifications of Laser Scribed 0.25mm/0.30mm Alumina (Al2O3) Ceramic Substrate Plate

Requirements of Laser Scribed 0.25 mm/0.30 mm Alumina (Al ₂ O ₃) Ceramic Substrate Plate

Product and Structure

These substrate plates are made from high-purity alumina (Al ₂ O ₃) ceramic. The product has at the very least 96% alumina, which gives it solid electrical insulation and outstanding thermal stability. It is ideal for requiring electronic and industrial applications.

Thickness Options

Two standard densities are offered: 0.25 mm and 0.30 mm . Both choices offer a great balance between mechanical toughness and adaptability for thin-film circuit layouts.

Laser Scribing Precision

Each plate is exactly laser scribed to create clean, accurate grooves or patterns. The laser process makes certain limited resistances with marginal cracking or cracking. Line widths can be as great as 20 microns , depending upon layout requirements. This level of detail supports complicated circuit layouts without jeopardizing architectural honesty.

Surface Top quality

The surface coating is smooth and uniform. Surface roughness normally determines listed below 0.5 µm Ra . This smoothness aids with regular thin-film deposition and reputable bonding throughout setting up.

Thermal and Electrical Characteristics

Alumina ceramic takes care of heats well, with a maximum continual use temperature level of 1,500 ° C in air. Its thermal conductivity arrays from 24 to 28 W/m · K , permitting reliable warmth dissipation. Electrically, it supplies quantity resistivity greater than 10 ¹⁴ Ω · cm and a dielectric toughness over 15 kV/mm , making it safe for high-voltage atmospheres.

Dimensional Tolerances

Requirement layers can be found in common sizes like 25mm x 25mm or 50mm x 50mm, however custom measurements are likewise feasible. Density resistance is held within ± 0.02 mm , and flatness remains under 0.1 mm across the full surface.

Applications

These substrates are commonly used in crossbreed circuits, sensing units, power components, and RF parts. Their dependability and accuracy make them a relied on choice in aerospace, auto, and clinical electronic devices.

ai-pressureless-8-1774683374265
Laser Scribed 0.25mm/0.30mm Alumina (Al2O3) Ceramic Substrate Plate

Applications of Laser Scribed 0.25mm/0.30mm Alumina (Al2O3) Ceramic Substrate Plate

Applications of Laser-Scribed 0.25 mm/0.30 mm Alumina Ceramic Substratum Plates

High-Performance Electronics

Laser-scribed alumina ceramic plates with thicknesses of 0.25 mm or 0.30 mm are extensively utilized in advanced electronic circuits. Their superb electric insulation and thermal stability make them suitable for crossbreed incorporated circuits, power components, and sensing unit product packaging. The accurate laser scribing enables clean, accurate patterning without damaging the product– making certain reputable efficiency even under high temperatures or extreme conditions.

RF and Microwave Instruments

These slim ceramic substratums support high-frequency signal transmission with minimal loss. Designers utilize them in RF filters, antennas, and microwave components where signal honesty matters. The smooth surface finish and tight dimensional control from laser processing assistance keep regular insusceptibility throughout the circuit.

Sensor and MEMS Assimilation

In micro-electromechanical systems (MEMS) and precision sensing units, room and reliability are vital. The 0.25 mm and 0.30 mm alumina plates supply mechanical toughness in a compact type. Laser scribing produces great attributes needed for sensing unit electrodes or interconnects without presenting stress or cracks– key for lasting tool security.

LED and Optoelectronics Product Packaging

Alumina’s high thermal conductivity helps dissipate warmth from high-brightness LEDs and laser diodes. The slim substratum suits tight optical settings up while maintaining elements cool down. Laser-defined traces and vias make it possible for direct mounting of chips, decreasing setting up actions and boosting light output effectiveness.

Medical and Aerospace Equipments

Demanding areas like clinical implants and aerospace electronics count on these ceramic plates for their biocompatibility, durability, and resistance to radiation or extreme temperature levels. The laser-scribed patterns make sure tidy, contamination-free surfaces– essential for sensitive applications where failure is not a choice.


Company Profile

Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.


Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.


Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

ai-boron-1-1774577558651
Laser Scribed 0.25mm/0.30mm Alumina (Al2O3) Ceramic Substrate Plate

5 FAQs of Laser Scribed 0.25mm/0.30mm Alumina (Al2O3) Ceramic Substrate Plate

Frequently Asked Questions: Laser Scribed 0.25mm/0.30mm Alumina Ceramic Substrate Plates

What is laser scribing?

Laser scribing uses a focused laser beam to mark or cut precise lines on the ceramic surface. This process creates clean, accurate patterns without damaging the material. It is ideal for preparing substrates for circuit traces or component placement.

Why choose 0.25mm or 0.30mm thickness?

These thin dimensions offer a good balance between mechanical strength and flexibility. They work well in compact electronic designs where space is limited. Both thicknesses support high-frequency performance and thermal stability.

What are the main benefits of alumina (Al₂O₃) ceramic?

Alumina ceramic has excellent electrical insulation, high thermal conductivity, and strong resistance to heat and chemicals. It stays stable under harsh conditions. This makes it reliable for demanding applications like power electronics and sensors.

Can these substrates handle high temperatures?

Yes. Alumina ceramic substrates can operate continuously at temperatures above 1000°C. The laser-scribed features remain intact even under extreme thermal stress. This ensures long-term reliability in high-heat environments.

Are laser-scribed alumina plates suitable for mass production?

Absolutely. Laser scribing is a fast, repeatable process that integrates smoothly into automated manufacturing lines. Each plate maintains consistent quality and precision. This supports efficient, large-scale production without extra tooling costs.

REQUEST A QUOTE

REQUEST A QUOTE