Laser Cut 96%/99.6% Alumina (Al2O3) Ceramic Substrate for Electronics

PRODUCT PARAMETERS

Description
REQUEST A QUOTE

Description

Overview of Laser Cut 96%/99.6% Alumina (Al2O3) Ceramic Substrate for Electronics

Alumina Ceramic, or Aluminum Oxide (Al₂O₃), is the most widely used and versatile advanced ceramic material. Known for its excellent balance of mechanical, thermal, and electrical properties, it is a cost-effective solution for a vast array of demanding industrial applications. Alumina components are produced in purity levels ranging from 85% to 99.9%, with properties enhancing as purity increases.

Features of Laser Cut 96%/99.6% Alumina (Al2O3) Ceramic Substrate for Electronics

  • High Hardness & Wear Resistance: Offers exceptional resistance to abrasion and mechanical wear.
  • Excellent Electrical Insulation: Maintains high electrical resistivity even at elevated temperatures.
  • Good Thermal Conductivity: (For a ceramic) effectively dissipates heat, especially in higher purity grades.
  • High Compressive Strength: Capable of withstanding significant mechanical loads.
  • Chemical Inertness: Highly resistant to corrosion from acids, alkalis, and molten metals.
  • Cost-Effectiveness: Provides superior performance at a lower cost compared to many other technical ceramics.
ai-pressureless-16-1774662241660
Laser Cut 96%/99.6% Alumina (Al2O3) Ceramic Substrate for Electronics

Specifications of Laser Cut 96%/99.6% Alumina (Al2O3) Ceramic Substrate for Electronics

Laser Cut Alumina Ceramic Substrate for Electronic Devices

Material Purity and Composition

Alumina (Al ₂ O SIX) ceramic substratums are offered in 2 typical pureness grades: 96% and 99.6%. The 96% grade offers good mechanical stamina and electrical insulation at a reduced price. The 99.6% grade provides superior thermal conductivity, tighter dimensional control, and higher dielectric toughness. Both types are ideal for requiring electronic applications where reliability issues.

Key Physical Properties

These substratums include high hardness, exceptional wear resistance, and strong chemical stability. They do not react with most acids or solvents. Their reduced thermal growth coefficient matches well with numerous semiconductor products. This helps in reducing anxiety throughout thermal biking. The 99.6% variation has a smoother surface area coating, which supports better circuit pattern.

Accuracy Laser Reducing

Each substratum is shaped utilizing advanced laser reducing modern technology. This approach makes certain clean sides, limited resistances, and intricate geometries without micro-cracks. Common thicknesses range from 0.25 mm to 1.0 mm, but custom-made dimensions are possible. Opening sizes as little as 0.1 mm can be achieved with consistent accuracy. Laser processing also prevents device wear, so every piece meets the very same high criterion.

Electrical and Thermal Efficiency

Both pureness levels offer strong electric insulation also at high voltages and temperature levels. The 99.6% alumina reveals far better efficiency in high-frequency circuits due to its reduced dielectric loss. Thermal conductivity arrays from 24– 30 W/m · K(96%) to 28– 35 W/m · K (99.6%). This makes them appropriate for power components, sensors, and hybrid circuits that create warmth.

Usual Applications

These substratums are widely used in LED plans, automobile electronics, RF parts, medical devices, and industrial sensors. Their security under harsh problems makes certain lasting operation in crucial systems.

ai-why-1-1774589800099
Laser Cut 96%/99.6% Alumina (Al2O3) Ceramic Substrate for Electronics

Applications of Laser Cut 96%/99.6% Alumina (Al2O3) Ceramic Substrate for Electronics

Applications of Laser-Cut 96% and 99.6% Alumina Porcelain Substrates in Electronic Devices

High-Performance Circuit Foundations

Laser-cut alumina ceramic substratums are extensively used in modern-day electronics. These substratums come in 2 typical pureness degrees: 96% and 99.6% aluminum oxide (Al two O TWO). Both deal outstanding electric insulation, strong mechanical support, and great thermal conductivity. The higher pureness grade (99.6%) provides even better efficiency sought after settings.

Power Electronics
These ceramic substrates handle high voltages and temperatures well. They are excellent for power modules, inverters, and converters. Their stability makes certain trusted procedure in electric vehicles, renewable resource systems, and industrial motor drives.

Sensors and Automotive Solutions
Automotive sensing units often utilize laser-cut alumina substrates. The material withstands heat, resonance, and deterioration. This makes it ideal for engine control devices, exhaust gas sensing units, and stress tracking tools.

RF and Microwave Elements
In wireless communication, signal stability issues. Alumina’s constant dielectric properties assist preserve performance in antennas, filters, and RF modules. The accuracy of laser reducing allows limited tolerances required for high-frequency applications.

LED and Optoelectronics
High-brightness LEDs produce substantial heat. Alumina substrates draw warmth far from the chip while offering a secure base. This enhances LED life-span and illumination, particularly in illumination and display systems.

Medical and Aerospace Electronic Devices
Instruments in these areas require reliability under tension. Alumina ceramics satisfy rigorous standards for biocompatibility and thermal shock resistance. They support circuitry in imaging tools, implantable tools, and avionics.

Laser cutting offers designers flexibility. It creates complicated forms with clean edges and fine features without damaging the ceramic. This process sustains miniaturization and custom formats– vital demands in today’s small digital designs.


Company Profile

Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.


Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.


Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

ceramic crucible (23)
Laser Cut 96%/99.6% Alumina (Al2O3) Ceramic Substrate for Electronics

5 FAQs of Laser Cut 96%/99.6% Alumina (Al2O3) Ceramic Substrate for Electronics

Frequently Asked Questions: Laser Cut 96%/99.6% Alumina Ceramic Substrates

What is alumina ceramic substrate?

Alumina (Al₂O₃) ceramic substrate is a strong, heat-resistant material used in electronics. It provides electrical insulation and good thermal conductivity. The numbers 96% and 99.6% show the purity level—higher purity means better performance in demanding applications.

Why choose laser cutting for these substrates?

Laser cutting gives clean, precise edges without cracking the brittle ceramic. It allows complex shapes and tight tolerances that traditional methods cannot achieve. This method also reduces waste and speeds up production.

What’s the difference between 96% and 99.6% alumina?

96% alumina is cost-effective and works well for general electronic uses. 99.6% alumina offers higher thermal conductivity, better mechanical strength, and improved electrical insulation. Use 99.6% when your design needs top performance under high heat or voltage.

Where are these substrates commonly used?

These substrates appear in power modules, LED lighting, sensors, automotive electronics, and RF devices. Their stability at high temperatures makes them ideal for harsh environments where reliability matters most.

Can you customize the size and shape?

Yes. Laser cutting supports full customization. You can specify exact dimensions, hole patterns, and edge profiles. Just share your design file, and we cut it to your requirements with high accuracy and consistency.

REQUEST A QUOTE

REQUEST A QUOTE