Next-Generation Ceramics: Unlocking Superior Properties for Industry
PRODUCT PARAMETERS
Description
Overview of Custom 2″/3″ (50/75mm) TR/TS Alumina/Zirconia/SiC Quick Change Discs
Alumina Ceramic, or Aluminum Oxide (Al₂O₃), is the most widely used and versatile advanced ceramic material. Known for its excellent balance of mechanical, thermal, and electrical properties, it is a cost-effective solution for a vast array of demanding industrial applications. Alumina components are produced in purity levels ranging from 85% to 99.9%, with properties enhancing as purity increases.
Features of Custom 2″/3″ (50/75mm) TR/TS Alumina/Zirconia/SiC Quick Change Discs
- High Hardness & Wear Resistance: Offers exceptional resistance to abrasion and mechanical wear.
- Excellent Electrical Insulation: Maintains high electrical resistivity even at elevated temperatures.
- Good Thermal Conductivity: (For a ceramic) effectively dissipates heat, especially in higher purity grades.
- High Compressive Strength: Capable of withstanding significant mechanical loads.
- Chemical Inertness: Highly resistant to corrosion from acids, alkalis, and molten metals.
- Cost-Effectiveness: Provides superior performance at a lower cost compared to many other technical ceramics.

Specifications of Custom 2″/3″ (50/75mm) TR/TS Alumina/Zirconia/SiC Quick Change Discs
Custom Quick-Change Discs– Constructed for Precision and Toughness
Our personalized quick-change discs been available in two basic dimensions: 2 inches (50 mm) and 3 inches (75 mm). They are made to fit fast and strive. You can select from three high-performance rough materials: alumina, zirconia, or silicon carbide (SiC). Each product supplies one-of-a-kind advantages for various jobs.
Rough Material Options
Alumina discs are difficult and lasting. They function well on steel, stainless steel, and various other steels. These discs deal with heavy grinding without wearing fast.
Zirconia blends durability with self-sharpening activity. As the disc puts on, fresh reducing grains appear. This makes zirconia ideal for aggressive stock removal and high-pressure applications.
Silicon Carbide (SiC) is sharp and fragile. It cuts fast on softer materials like light weight aluminum, wood, plastic, and composites. SiC also works well for ending up and fining sand non-ferrous steels.
Design and Compatibility
These discs use a quick-change system. That means you can exchange them in seconds without devices. They connect safely to compatible support pads utilizing a basic push-and-lock mechanism. The style decreases downtime and maintains your operations smooth.
Both 2″ and 3″ sizes suit most portable grinders, pass away mills, and rotating tools. The smaller 2″ disc gives better control for information work. The 3″ version covers more location and gets rid of product faster.
Efficiency You Can Depend On
Every disc is constructed with constant grain distribution and solid bonding. This makes certain also use and dependable efficiency. Whether you’re grinding, blending, deburring, or finishing, these discs deliver tidy results with less initiative.
We offer customized grit levels, hole patterns, and support kinds to match your precise requirements. Just inform us your application, and we’ll aid you choose the right mix.

Applications of Custom 2″/3″ (50/75mm) TR/TS Alumina/Zirconia/SiC Quick Change Discs
Applications of Custom 2″/ 3″ (50/75mm) TR/TS Alumina, Zirconia, and SiC Quick Adjustment Discs
Why These Discs Job Well in Tough Jobs
Customized 2″/ 3″ (50/75mm) fast adjustment discs made from alumina, zirconia, or silicon carbide (SiC) are built for demanding jobs. They connect quickly with TR (twist-lock) or TS (push-on) systems. This suggests much less time changing tools and more time getting job done.
Alumina discs handle basic grinding and blending on steel, stainless-steel, and other metals. They stay sharp longer than conventional abrasives and provide a smooth coating without packing up rapidly.
Zirconia discs are harder. They cut much faster and last much longer under hefty stress. Utilize them for aggressive supply elimination, weld grinding, or shaping hard alloys. Their self-sharpening grains maintain efficiency constant even throughout long terms.
Silicon carbide (SiC) discs job best on softer materials. Assume aluminum, brass, plastics, wood, or compounds. SiC cuts cleanly without tearing or gumming up. It’s likewise excellent for completing work that need a great surface area.
Where You’ll See Them in Action
These quick change discs prevail in metal construction stores, car repair work bays, and aerospace assembly lines. Upkeep crews utilize them for fast fixes on equipment. Woodworkers choose SiC versions for fining sand fragile surfaces. Service providers count on them for on-site metal prep before paint or welding.
The TR and TS mounting designs fit most basic back-up pads. That makes switching in between grits or products very easy. No additional devices are needed– just twist or push to secure the disc in position.
Because they can be found in both 2″ and 3″ sizes, users can pick the best equilibrium of rate and control. Smaller sized discs reach difficult situations. Bigger ones cover more location fast. All choices deliver constant results with less effort.
Company Profile
Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.
Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.

Payment Methods
T/T, Western Union, Paypal, Credit Card etc.
Shipment Methods
By air, by sea, by express, as customers request.

5 FAQs of Custom 2″/3″ (50/75mm) TR/TS Alumina/Zirconia/SiC Quick Change Discs
Frequently Asked Questions
What sizes are available for these quick change discs?
We offer two standard backing plate sizes: 2 inches (50 mm) and 3 inches (75 mm). Both fit common quick change systems used in grinders and sanders. Choose the size that matches your tool.
Which abrasive materials do you use?
Our discs come with three high-performance abrasive grains: alumina, zirconia, and silicon carbide (SiC). Alumina works well for general metal grinding. Zirconia lasts longer under heavy pressure. Silicon carbide is best for non-ferrous metals, stone, or composites.
How do the TR and TS styles differ?
TR stands for “twist-lock right,” and TS means “twist-lock straight.” The difference is in how they attach to the backing pad. TR has a right-angle design for tight spaces. TS mounts straight on for standard use. Make sure your tool matches the disc style before buying.
Are these discs easy to replace?
Yes. These are quick change discs. You simply twist the old one off and twist a new one on. No tools or screws are needed. This saves time during work and reduces downtime between tasks.
What applications are these discs suited for?
They are ideal for metal fabrication, weld cleanup, deburring, and surface prep. Alumina handles steel and iron. Zirconia suits aggressive stock removal. Silicon carbide works on aluminum, fiberglass, ceramics, and stone. Pick the grain based on your material and job type.
REQUEST A QUOTE
RELATED PRODUCTS
Al2O3 Aluminum Oxide Ceramic PCB Board / Substrate Sheet
Calcined Alumina for Refractories/Ceramics/Polishing (CAS 1344-28-1)
High Precision Alumina Ceramic Refractory Tube / Shaft for Boiler Pumps
Industrial Custom C799 99.7% Al2O3 Round Alumina Ceramic Disc
Wear & Chemical Resistant Alumina Ceramic Shaft for High-Speed Pumps


