High Purity Alumina (Al2O3) Powder for Ceramic Industry

PRODUCT PARAMETERS

Description
REQUEST A QUOTE

Description

Overview of High Purity Alumina (Al2O3) Powder for Ceramic Industry

Alumina Ceramic, or Aluminum Oxide (Al₂O₃), is the most widely used and versatile advanced ceramic material. Known for its excellent balance of mechanical, thermal, and electrical properties, it is a cost-effective solution for a vast array of demanding industrial applications. Alumina components are produced in purity levels ranging from 85% to 99.9%, with properties enhancing as purity increases.

Features of High Purity Alumina (Al2O3) Powder for Ceramic Industry

  • High Hardness & Wear Resistance: Offers exceptional resistance to abrasion and mechanical wear.
  • Excellent Electrical Insulation: Maintains high electrical resistivity even at elevated temperatures.
  • Good Thermal Conductivity: (For a ceramic) effectively dissipates heat, especially in higher purity grades.
  • High Compressive Strength: Capable of withstanding significant mechanical loads.
  • Chemical Inertness: Highly resistant to corrosion from acids, alkalis, and molten metals.
  • Cost-Effectiveness: Provides superior performance at a lower cost compared to many other technical ceramics.
logo
High Purity Alumina (Al2O3) Powder for Ceramic Industry

Specifications of High Purity Alumina (Al2O3) Powder for Ceramic Industry

High Purity Alumina (Al ₂ O THREE) Powder for Porcelain Applications

Trick Requirements

Our high purity alumina powder is produced advanced ceramic production. It consists of 99.99% minimum Al ₂ O ₃ , guaranteeing extraordinary chemical security and efficiency. The powder shows very reduced degrees of contaminations. Sodium (Na) is listed below 5 ppm . Iron (Fe) stays under 2 ppm . Silicon (Si) and various other trace steels are additionally snugly managed.

Physical Features

The powder has a white, free-flowing appearance without any visible agglomerates. Its average bit size varies from 0.3 to 0.5 microns , using consistent dispersion in ceramic slurries. The particular area drops between 8– 12 m ²/ g , which sustains strong sintering task at lower temperature levels. Mass density is normally 0.6– 0.8 g/cm THREE , while tapped density gets to 1.0– 1.2 g/cm TWO .

Purity and Uniformity

Each batch undertakes stringent top quality checks. We utilize ICP-MS and XRF approaches to validate structure. Dampness material continues to be listed below 0.1%, avoiding undesirable responses during processing. Chloride and sulfate deposits are maintained under 10 ppm each to stay clear of problems in final products.

Handling and Packaging

The powder is packed in secured, double-layer polyethylene bags inside fiber drums. Conventional web weight is 25 kg per drum . Store in a completely dry, amazing location far from dampness and contaminants. Usage common commercial health techniques when dealing with fine powders.

This alumina grade fulfills the demands of technological porcelains, including substratums, insulators, and wear-resistant components. Its constant chemistry and fragment qualities aid suppliers attain high-density, defect-free parts with reputable mechanical toughness and thermal performance.

B4C (30)
High Purity Alumina (Al2O3) Powder for Ceramic Industry

Applications of High Purity Alumina (Al2O3) Powder for Ceramic Industry

Applications of High Purity Alumina Powder in the Ceramic Sector

Why High Purity Issues

High pureness alumina (Al ₂ O TWO) powder is an essential material in sophisticated porcelains. Its pureness level– often 99.99% or greater– makes it excellent for products that should carry out under severe conditions. Impurities can weaken ceramic parts or create failures, so tidy, regular alumina is necessary.

Electronic devices and Insulators

Solid electrical insulation is one major reason manufacturers choose high purity alumina. It is utilized to make substrates, insulators, and ignition system bodies. These components have to resist high voltages and stay steady at heats. Even percentages of pollutants can mess up performance, so only the purest alumina works here.

Wear-Resistant Parts

Extreme firmness and sturdiness make this powder best for wear parts. Think of seals, bearings, cutting tools, and linings made use of in extreme industrial setups. High purity alumina porcelains last longer than steel or typical ceramic choices. They likewise keep their form and stamina when revealed to abrasion or impact.

Biomedical Implants

In medical gadgets, safety and biocompatibility are non-negotiable. High purity alumina is used for hip joints, oral implants, and other load-bearing prosthetics. The body approves it well, and it does not corrode or weaken gradually. Any kind of trace metals or pollutants can set off responses, so pureness is vital.

Optical and Transparent Ceramics

Some specialized applications need porcelains that transfer light. High pureness alumina can be refined right into transparent kinds for lamps, sensors, or safety home windows. Light passes through easily just when the material is free of defects and foreign bits– one more reason purity can not be jeopardized.

Manufacturers rely on high purity alumina powder due to the fact that it provides foreseeable results. Every batch must satisfy strict criteria to make certain the last ceramic product executes as anticipated sought after environments.


Company Profile

Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.


Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.


Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

B4C (28)
High Purity Alumina (Al2O3) Powder for Ceramic Industry

5 FAQs of High Purity Alumina (Al2O3) Powder for Ceramic Industry

High Purity Alumina (Al₂O₃) Powder – Top 5 FAQs for Ceramic Manufacturers

What is high purity alumina powder?

High purity alumina powder is aluminum oxide (Al₂O₃) with a purity level of 99.99% or higher. It contains very low levels of impurities like sodium, iron, or silica. This makes it ideal for advanced ceramic applications where performance and reliability matter.

Why is purity important in ceramic production?

Impurities can change how ceramics behave during firing and use. Even small amounts of contaminants may lower strength, reduce thermal stability, or cause discoloration. High purity alumina ensures consistent results, better mechanical properties, and longer product life.

What particle size is best for my application?

The right particle size depends on your process and end product. Fine powders (under 1 micron) work well for dense, high-strength ceramics. Coarser grades may be used for refractory parts or when faster pressing is needed. Always match the powder size to your forming and sintering method.

How should I store high purity alumina powder?

Keep the powder in a dry, sealed container away from moisture and dust. Humidity can cause clumping or affect flowability. Store it in a cool place and avoid contact with other materials that might introduce contamination.

Can this powder be used in both traditional and technical ceramics?

Yes. While it’s most common in technical ceramics—like insulators, substrates, or wear parts—it can also improve quality in traditional ceramics when high whiteness, strength, or chemical resistance is required. Just make sure your process aligns with the powder’s characteristics.

REQUEST A QUOTE

REQUEST A QUOTE