High strength metallized silicon nitride ceramic substrate

PRODUCT PARAMETERS

Description
REQUEST A QUOTE

Description

Overview of High strength metallized silicon nitride ceramic substrate

Silicon Nitride (Si₃N₄) is a high-performance ceramic celebrated for its exceptional combination of fracture toughness, thermal shock resistance, and high-temperature strength. It is the material of choice for the most demanding structural applications involving severe thermal and mechanical stress, such as in advanced engines and bearings.

Features of High strength metallized silicon nitride ceramic substrate

  • High Fracture Toughness: Exceptional resistance to crack propagation and mechanical shock compared to other ceramics.
  • Outstanding Thermal Shock Resistance: Can withstand the most severe and rapid temperature fluctuations.
  • High Strength at Elevated Temperatures: Retains its mechanical properties up to 1200-1300°C in air.
  • Low Density & High Hardness: Lightweight and very wear-resistant.
  • Good Creep Resistance: Resists deformation under sustained load at high temperatures.
  • Excellent Rolling Contact Fatigue Life: Superior to steel in bearing applications.
B4C (40)
High strength metallized silicon nitride ceramic substrate

Specifications of High strength metallized silicon nitride ceramic substrate

High-Strength Metallized Silicon Nitride Ceramic Substrate

Product Structure

This substratum makes use of high-purity silicon nitride (Si three N ₄) as its base material. The ceramic is engineered for superior mechanical stamina and thermal stability. A slim layer of steel– commonly copper, nickel, or silver– is bonded straight to the surface via an advanced metallization process. This produces a trustworthy electric pathway while preserving the ceramic’s architectural honesty.

Mechanical Features

Flexural stamina: 800– 1000 MPa
Fracture sturdiness: 6– 8 MPa · m 1ST/ ².
Hardness: 15– 17 GPa (Vickers).
These values make the substratum considerably stronger than typical alumina or aluminum nitride ceramics. It stands up to breaking under heavy lots and executes well in high-vibration atmospheres.

Thermal Performance

Thermal conductivity: 70– 90 W/m · K. Coefficient of thermal development (CTE): 2.8– 3.2 × 10 ⁻⁶/ ° C (25– 800 ° C).
The material manages fast temperature changes without warping or peeling. Its CTE very closely matches that of usual semiconductor products, which decreases stress and anxiety throughout thermal cycling.

Electrical Characteristics

Dielectric strength: ≥ 15 kV/mm.
Volume resistivity: > 10 ¹⁴ Ω · centimeters.
Dissipation aspect:

B4C (39)
High strength metallized silicon nitride ceramic substrate

Applications of High strength metallized silicon nitride ceramic substrate

Applications of High-Strength Metallized Silicon Nitride Porcelain Substrates

Power Electronics and Electric Autos

High-strength metallized silicon nitride ceramic substrates are widely used in power electronics. They manage high voltages and big currents consistently. These substrates work well in inverters and converters found in electrical lorries. Their strong mechanical residential properties aid them survive heavy resonances and thermal shocks throughout everyday use. This makes them a trustworthy choice for automobile power components.

Industrial Electric Motor Drives

In commercial settings, motor drives require elements that stay stable under tension. Silicon nitride substrates offer exceptional thermal conductivity and electric insulation. They keep heat far from sensitive components while supporting metal circuits on their surface area. This balance allows electric motor systems to run longer and a lot more successfully.

Railway and Aerospace Equipments

Trains and aircraft demand products that perform under severe conditions. Metallized silicon nitride fulfills this need. It stands up to fracturing also when temperatures alter quickly. Its light-weight nature likewise helps reduce overall system weight– important in both rail and air transportation. Designers pick it for traction inverters and onboard power systems since it lasts longer than several alternatives.

Renewable Energy Devices

Solar inverters and wind turbine converters rely on long lasting substrates to take care of energy circulation. Silicon nitride’s capacity to spread warmth equally avoids hot spots that can damage electronic devices. The metallization layer bonds well with copper or light weight aluminum traces, making sure solid electric connections with time. This stability sustains constant efficiency in severe exterior settings.

Medical and Protection Electronic Devices

Precision matters in medical tools and protection hardware. These fields utilize silicon nitride substratums where failure is not an alternative. The product’s pureness and toughness assistance keep signal stability and structural integrity. Whether in imaging systems or radar devices, the substrate carries out without degradation under demanding operational cycles.


Company Profile

Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.


Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.


Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

B4C (21)
High strength metallized silicon nitride ceramic substrate

5 FAQs of High strength metallized silicon nitride ceramic substrate

High-Strength Metallized Silicon Nitride Ceramic Substrate – Frequently Asked Questions

What is a metallized silicon nitride ceramic substrate?

It is a high-performance ceramic base made from silicon nitride. The surface is coated with a thin metal layer—usually copper or aluminum—to allow electrical connections. This material combines strong mechanical properties with excellent thermal conductivity.

Why choose silicon nitride over other ceramics?

Silicon nitride has higher strength and better fracture resistance than alumina or aluminum nitride. It also handles thermal shock well. These traits make it ideal for demanding applications like power electronics and electric vehicles.

How does metallization improve performance?

Metallization lets you solder or bond electronic components directly to the ceramic. Without this metal layer, attaching parts would be hard or impossible. The process also ensures low electrical resistance and reliable heat transfer.

Is this substrate suitable for high-temperature environments?

Yes. Silicon nitride stays stable at temperatures above 1,000°C. The metallized layer is designed to match the ceramic’s thermal expansion, so it won’t crack or peel under heat stress. This makes the substrate reliable in harsh operating conditions.

What industries use this type of substrate?

It is widely used in automotive (especially EV power modules), industrial motor drives, renewable energy inverters, and aerospace systems. Any application needing durability, thermal management, and electrical insulation benefits from this material.

REQUEST A QUOTE

REQUEST A QUOTE